* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_MCF5441x /* define processor family */
-#define CONFIG_M54418 /* define processor type */
#define CONFIG_M54418TWR /* M54418TWR board */
#define CONFIG_MCFUART
#define CONFIG_BOOTP_HOSTNAME
/* Command line configuration */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BOOTD
#define CONFIG_CMD_CACHE
#undef CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_I2C
#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_UBI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
#define CONFIG_CMD_MII
#undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_NAND_YAFFS
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SPI
#define CONFIG_CMD_SF
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
/*
* NAND FLASH
/* Network configuration */
#define CONFIG_MCFFEC
#ifdef CONFIG_MCFFEC
-#define CONFIG_NET_MULTI 1
#define CONFIG_MII 1
#define CONFIG_MII_INIT 1
#define CONFIG_SYS_DISCOVER_PHY
"::eth0:off:rw console=ttyS0,115200"
#endif
-#define CONFIG_ETHADDR 00:e0:0c:bc:e5:60
-#define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61
#define CONFIG_ETHPRIME "FEC0"
#define CONFIG_IPADDR 192.168.1.2
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.1.1
#define CONFIG_GATEWAYIP 192.168.1.1
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
#define CONFIG_SYS_FEC_BUF_USE_SRAM
/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
#ifndef CONFIG_SYS_DISCOVER_PHY
#define CONFIG_HARD_SPI
#define CONFIG_SYS_SBFHDR_SIZE 0x7
#ifdef CONFIG_CMD_SPI
-# define CONFIG_SPI_FLASH
-# define CONFIG_SPI_FLASH_ATMEL
# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
DSPI_CTAR_PCSSCK_1CLK | \
#define CONFIG_PRAM 2048 /* 2048 KB */
-/* HUSH */
-#define CONFIG_SYS_HUSH_PARSER 1
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#define CONFIG_SYS_PROMPT "-> "
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#if defined(CONFIG_CMD_KGDB)
#endif
#if defined(CONFIG_SERIAL_BOOT)
-#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
#else
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#endif