FIT: Modify option FIT_SIGNATURE in Kconfig

[J-u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 8a0de5c67df48670ee27cbf99a2bbb70c6d09ff3..9b406c844700f9674f4a787cb95019e6d7d4c115 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2015
 PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION =
 NAME =
 
 # *DOCUMENTATION*
@@ -776,6 +776,13 @@ ifneq ($(CONFIG_SYS_GENERIC_BOARD),y)
        @echo "See doc/README.generic-board for further information"
        @echo "===================================================="
 endif
+ifeq ($(CONFIG_DM_I2C_COMPAT),y)
+       @echo "===================== WARNING ======================"
+       @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
+       @echo "(possibly in a subsequent patch in your series)"
+       @echo "before sending patches to the mailing list."
+       @echo "===================================================="
+endif
 
 PHONY += dtbs
 dtbs dts/dt.dtb: checkdtc u-boot
@@ -946,27 +953,43 @@ u-boot-nand.gph: u-boot.bin FORCE
 ifneq ($(CONFIG_X86_RESET_VECTOR),)
 rom: u-boot.rom FORCE
 
-u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin \
-               $(srctree)/board/$(BOARDDIR)/mrc.bin
-       $(objtree)/tools/ifdtool -c -r $(CONFIG_ROM_SIZE) u-boot.tmp
-       if [ -n "$(CONFIG_HAVE_INTEL_ME)" ]; then \
-               $(objtree)/tools/ifdtool -D \
-                       $(srctree)/board/$(BOARDDIR)/descriptor.bin u-boot.tmp; \
-               $(objtree)/tools/ifdtool \
-                       -i ME:$(srctree)/board/$(BOARDDIR)/me.bin u-boot.tmp; \
-       fi
-       $(objtree)/tools/ifdtool -w \
-               $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-dtb.bin u-boot.tmp
-       $(objtree)/tools/ifdtool -w \
-               $(CONFIG_X86_MRC_START):$(srctree)/board/$(BOARDDIR)/mrc.bin \
-               u-boot.tmp
-       $(objtree)/tools/ifdtool -w \
-               $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin \
-               u-boot.tmp
-       $(objtree)/tools/ifdtool -w \
-               $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILENAME) \
-               u-boot.tmp
-       mv u-boot.tmp $@
+IFDTOOL=$(objtree)/tools/ifdtool
+IFDTOOL_FLAGS  = -f 0:$(objtree)/u-boot.dtb
+IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
+IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin
+IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
+
+ifneq ($(CONFIG_HAVE_INTEL_ME),)
+IFDTOOL_ME_FLAGS  = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
+IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
+endif
+
+ifneq ($(CONFIG_HAVE_MRC),)
+IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
+endif
+
+ifneq ($(CONFIG_HAVE_FSP),)
+IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
+endif
+
+ifneq ($(CONFIG_HAVE_CMC),)
+IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
+endif
+
+ifneq ($(CONFIG_X86_OPTION_ROM_ADDR),)
+IFDTOOL_FLAGS += -w $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILE)
+endif
+
+quiet_cmd_ifdtool = IFDTOOL $@
+cmd_ifdtool  = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
+ifneq ($(CONFIG_HAVE_INTEL_ME),)
+cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
+endif
+cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
+cmd_ifdtool += mv u-boot.tmp $@
+
+u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin
+       $(call if_changed,ifdtool)
 
 OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
 u-boot-x86-16bit.bin: u-boot FORCE
@@ -999,15 +1022,22 @@ u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
 #concatenated with u-boot binary. It is need by PowerPC SoC having
 #internal SRAM <= 512KB.
 MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
-               -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
+               -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
+               -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
 
 spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
        $(call if_changed,mkimage)
 
+ifeq ($(ARCH),arm)
+UBOOT_BINLOAD := u-boot.img
+else
+UBOOT_BINLOAD := u-boot.bin
+endif
+
 OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
                          --gap-fill=0xff
 
-u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE
+u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
        $(call if_changed,pad_cat)
 
 # PPC4xx needs the SPL at the end of the image, since the reset vector
@@ -1255,7 +1285,7 @@ CLEAN_DIRS  += $(MODVERDIR) \
                        $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
 
 CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
-              u-boot* MLO* SPL System.map
+              boot* u-boot* MLO* SPL System.map
 
 # Directories & files removed with 'make mrproper'
 MRPROPER_DIRS  += include/config include/generated spl tpl \