#if defined(CONFIG_CMD_IDE)
#include <ide.h>
#endif
-#if defined(CONFIG_CMD_SATA)
-#include <sata.h>
-#endif
#if defined(CONFIG_CMD_SCSI)
#include <scsi.h>
#endif
#include <status_led.h>
#endif
#include <net.h>
+#ifdef CONFIG_GENERIC_MMC
+#include <mmc.h>
+#endif
#include <serial.h>
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
#if !defined(CONFIG_CPM2)
#include <commproc.h>
#endif
#if defined(CONFIG_LOGBUFFER)
#include <logbuff.h>
#endif
-#if defined(CFG_INIT_RAM_LOCK) && defined(CONFIG_E500)
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
#include <asm/cache.h>
#endif
#ifdef CONFIG_PS2KBD
#include <keyboard.h>
#endif
-#ifdef CFG_UPDATE_FLASH_SIZE
+#ifdef CONFIG_ADDR_MAP
+#include <asm/mmu.h>
+#endif
+
+#ifdef CONFIG_MP
+#include <asm/mp.h>
+#endif
+
+#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
extern int update_flash_size (int flash_size);
#endif
defined(CONFIG_SOFT_I2C)
#include <i2c.h>
#endif
-#if defined(CONFIG_HARD_SPI)
#include <spi.h>
-#endif
#include <nand.h>
static char *failed = "*** failed ***\n";
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CFG_ENV_IS_EMBEDDED)
-#define TOTAL_MALLOC_LEN CFG_MALLOC_LEN
-#elif ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
- (CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
- defined(CFG_ENV_IS_IN_NVRAM)
-#define TOTAL_MALLOC_LEN (CFG_MALLOC_LEN + CFG_ENV_SIZE)
+#if defined(CONFIG_ENV_IS_EMBEDDED)
+#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
+#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
+ (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
+ defined(CONFIG_ENV_IS_IN_NVRAM)
+#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
#else
-#define TOTAL_MALLOC_LEN CFG_MALLOC_LEN
+#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#endif
-#if !defined(CFG_MEM_TOP_HIDE)
-#define CFG_MEM_TOP_HIDE 0
+#if !defined(CONFIG_SYS_MEM_TOP_HIDE)
+#define CONFIG_SYS_MEM_TOP_HIDE 0
#endif
extern ulong __init_end;
static void mem_malloc_init (void)
{
#if !defined(CONFIG_RELOC_FIXUP_WORKS)
- mem_malloc_end = CFG_MONITOR_BASE + gd->reloc_off;
+ mem_malloc_end = CONFIG_SYS_MONITOR_BASE + gd->reloc_off;
#endif
mem_malloc_start = mem_malloc_end - TOTAL_MALLOC_LEN;
mem_malloc_brk = mem_malloc_start;
return ((void *) old);
}
-char *strmhz (char *buf, long hz)
-{
- long l, n;
- long m;
-
- n = hz / 1000000L;
- l = sprintf (buf, "%ld", n);
- m = (hz % 1000000L) / 1000L;
- if (m != 0)
- sprintf (buf + l, ".%03ld", m);
- return (buf);
-}
-
/*
* All attempts to come up with a "common" initialization sequence
* that works for all boards and architectures failed: some of the
static int init_func_i2c (void)
{
puts ("I2C: ");
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
puts ("ready\n");
return (0);
}
#endif
init_timebase,
#endif
-#ifdef CFG_ALLOC_DPRAM
+#ifdef CONFIG_SYS_ALLOC_DPRAM
#if !defined(CONFIG_CPM2)
dpram_init,
#endif
prt_8260_rsr,
prt_8260_clks,
#endif /* CONFIG_8260 */
-#if defined(CONFIG_MPC83XX)
+#if defined(CONFIG_MPC83xx)
prt_83xx_rsr,
#endif
checkcpu,
#if defined(CONFIG_HARD_SPI)
init_func_spi,
#endif
-#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */
- dtt_init,
-#endif
#ifdef CONFIG_POST
post_init_f,
#endif
INIT_FUNC_WATCHDOG_RESET
init_func_ram,
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
testdram,
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */
INIT_FUNC_WATCHDOG_RESET
NULL, /* Terminate this list */
};
-#ifndef CONFIG_MAX_MEM_MAPPED
-#define CONFIG_MAX_MEM_MAPPED (256 << 20)
-#endif
ulong get_effective_memsize(void)
{
#ifndef CONFIG_VERY_BIG_RAM
#ifdef CONFIG_LOGBUFFER
unsigned long logbuffer_base(void)
{
- return CFG_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
+ return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
}
#endif
#endif
/* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC83XX) && \
+#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC83xx) && \
!defined(CONFIG_MPC85xx) && !defined(CONFIG_MPC86xx)
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
* - monitor code
* - board info struct
*/
- len = (ulong)&_end - CFG_MONITOR_BASE;
+ len = (ulong)&_end - CONFIG_SYS_MONITOR_BASE;
/*
* Subtract specified amount of memory to hide so that it won't
* memory size from the SDRAM controller setup will have to
* get fixed.
*/
- gd->ram_size -= CFG_MEM_TOP_HIDE;
+ gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
- addr = CFG_SDRAM_BASE + get_effective_memsize();
+ addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize();
+
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
+ /*
+ * We need to make sure the location we intend to put secondary core
+ * boot code is reserved and not used by any part of u-boot
+ */
+ if (addr > determine_mp_bootpg()) {
+ addr = determine_mp_bootpg();
+ debug ("Reserving MP boot page to %08lx\n", addr);
+ }
+#endif
#ifdef CONFIG_LOGBUFFER
#ifndef CONFIG_ALT_LB_ADDR
addr_sp -= sizeof (bd_t);
bd = (bd_t *) addr_sp;
gd->bd = bd;
- debug ("Reserving %d Bytes for Board Info at: %08lx\n",
+ debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
sizeof (bd_t), addr_sp);
addr_sp -= sizeof (gd_t);
id = (gd_t *) addr_sp;
- debug ("Reserving %d Bytes for Global Data at: %08lx\n",
+ debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
sizeof (gd_t), addr_sp);
/*
* Save local variables to board info struct
*/
- bd->bi_memstart = CFG_SDRAM_BASE; /* start of DRAM memory */
+ bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */
bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
#ifdef CONFIG_IP860
bd->bi_sramstart = SRAM_BASE; /* start of SRAM memory */
bd->bi_sramsize = SRAM_SIZE; /* size of SRAM memory */
#elif defined CONFIG_MPC8220
- bd->bi_sramstart = CFG_SRAM_BASE; /* start of SRAM memory */
- bd->bi_sramsize = CFG_SRAM_SIZE; /* size of SRAM memory */
+ bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM memory */
+ bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM memory */
#else
bd->bi_sramstart = 0; /* FIXME */ /* start of SRAM memory */
bd->bi_sramsize = 0; /* FIXME */ /* size of SRAM memory */
#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
- bd->bi_immr_base = CFG_IMMR; /* base of IMMR register */
+ bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */
#endif
#if defined(CONFIG_MPC5xxx)
- bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */
+ bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
#endif
-#if defined(CONFIG_MPC83XX)
- bd->bi_immrbar = CFG_IMMR;
+#if defined(CONFIG_MPC83xx)
+ bd->bi_immrbar = CONFIG_SYS_IMMR;
#endif
#if defined(CONFIG_MPC8220)
- bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */
+ bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
bd->bi_inpfreq = gd->inp_clk;
bd->bi_pcifreq = gd->pci_clk;
bd->bi_vcofreq = gd->vco_clk;
/* store bootparam to sram (backward compatible), here? */
{
- u32 *sram = (u32 *)CFG_SRAM_BASE;
+ u32 *sram = (u32 *)CONFIG_SYS_SRAM_BASE;
*sram++ = gd->ram_size;
*sram++ = gd->bus_clk;
*sram++ = gd->inp_clk;
#endif /* CONFIG_MPC5xxx */
bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
-#ifdef CFG_EXTBDINFO
+#ifdef CONFIG_SYS_EXTBDINFO
strncpy ((char *)bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
strncpy ((char *)bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
bd->bi_pci_busfreq = get_PCI_freq ();
bd->bi_opbfreq = get_OPB_freq ();
-#elif defined(CONFIG_XILINX_ML300)
+#elif defined(CONFIG_XILINX_405)
bd->bi_pci_busfreq = get_PCI_freq ();
#endif
#endif
void board_init_r (gd_t *id, ulong dest_addr)
{
cmd_tbl_t *cmdtp;
- char *s, *e;
+ char *s;
bd_t *bd;
- int i;
extern void malloc_bin_reloc (void);
-#ifndef CFG_ENV_IS_NOWHERE
+#ifndef CONFIG_ENV_IS_NOWHERE
extern char * env_name_spec;
#endif
-#ifndef CFG_NO_FLASH
+#ifndef CONFIG_SYS_NO_FLASH
ulong flash_size;
#endif
gd->reloc_off = 0;
mem_malloc_end = dest_addr;
#else
- gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+ gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
#endif
#ifdef CONFIG_SERIAL_MULTI
WATCHDOG_RESET ();
+ /*
+ * Setup trap handlers
+ */
+ trap_init (dest_addr);
+
+#ifdef CONFIG_ADDR_MAP
+ init_addr_map();
+#endif
+
#if defined(CONFIG_BOARD_EARLY_INIT_R)
board_early_init_r ();
#endif
addr = (ulong)(cmdtp->usage) + gd->reloc_off;
cmdtp->usage = (char *)addr;
}
-#ifdef CFG_LONGHELP
+#ifdef CONFIG_SYS_LONGHELP
if (cmdtp->help) {
addr = (ulong)(cmdtp->help) + gd->reloc_off;
cmdtp->help = (char *)addr;
#endif
}
/* there are some other pointer constants we must deal with */
-#ifndef CFG_ENV_IS_NOWHERE
+#ifndef CONFIG_ENV_IS_NOWHERE
env_name_spec += gd->reloc_off;
#endif
WATCHDOG_RESET();
-#if defined(CONFIG_IP860) || defined(CONFIG_PCU_E) || \
- defined (CONFIG_FLAGADM) || defined(CONFIG_MPC83XX)
+#if defined(CONFIG_SYS_DELAYED_ICACHE) || defined(CONFIG_MPC83xx)
icache_enable (); /* it's time to enable the instruction cache */
#endif
-#if defined(CFG_INIT_RAM_LOCK) && defined(CONFIG_E500)
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */
#endif
asm ("sync ; isync");
- /*
- * Setup trap handlers
- */
- trap_init (dest_addr);
+ /* initialize malloc() area */
+ mem_malloc_init ();
+ malloc_bin_reloc ();
-#if !defined(CFG_NO_FLASH)
+#if !defined(CONFIG_SYS_NO_FLASH)
puts ("FLASH: ");
if ((flash_size = flash_init ()) > 0) {
-# ifdef CFG_FLASH_CHECKSUM
+# ifdef CONFIG_SYS_FLASH_CHECKSUM
print_size (flash_size, "");
/*
* Compute and print flash CRC if flashchecksum is set to 'y'
*/
s = getenv ("flashchecksum");
if (s && (*s == 'y')) {
- printf (" CRC: %08lX",
- crc32 (0, (const unsigned char *) CFG_FLASH_BASE, flash_size)
+ printf (" CRC: %08X",
+ crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
);
}
putc ('\n');
-# else /* !CFG_FLASH_CHECKSUM */
+# else /* !CONFIG_SYS_FLASH_CHECKSUM */
print_size (flash_size, "\n");
-# endif /* CFG_FLASH_CHECKSUM */
+# endif /* CONFIG_SYS_FLASH_CHECKSUM */
} else {
puts (failed);
hang ();
}
- bd->bi_flashstart = CFG_FLASH_BASE; /* update start of FLASH memory */
+ bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; /* update start of FLASH memory */
bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */
-#if defined(CFG_UPDATE_FLASH_SIZE)
+#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
/* Make a update of the Memctrl. */
update_flash_size (flash_size);
#endif
# if defined(CONFIG_PCU_E) || defined(CONFIG_OXC) || defined(CONFIG_RMU)
/* flash mapped at end of memory map */
bd->bi_flashoffset = TEXT_BASE + flash_size;
-# elif CFG_MONITOR_BASE == CFG_FLASH_BASE
+# elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */
# else
bd->bi_flashoffset = 0;
# endif
-#else /* CFG_NO_FLASH */
+#else /* CONFIG_SYS_NO_FLASH */
bd->bi_flashsize = 0;
bd->bi_flashstart = 0;
bd->bi_flashoffset = 0;
-#endif /* !CFG_NO_FLASH */
+#endif /* !CONFIG_SYS_NO_FLASH */
WATCHDOG_RESET ();
WATCHDOG_RESET ();
- /* initialize malloc() area */
- mem_malloc_init ();
- malloc_bin_reloc ();
-
#ifdef CONFIG_SPI
-# if !defined(CFG_ENV_IS_IN_EEPROM)
+# if !defined(CONFIG_ENV_IS_IN_EEPROM)
spi_init_f ();
# endif
spi_init_r ();
* the environment is in EEPROM.
*/
-#if defined(CFG_EXTBDINFO)
+#if defined(CONFIG_SYS_EXTBDINFO)
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
#if defined(CONFIG_I2CFAST)
/*
bd->bi_iic_fast[1] = 0;
#endif /* CONFIG_I2CFAST */
#endif /* CONFIG_405GP, CONFIG_405EP */
-#endif /* CFG_EXTBDINFO */
+#endif /* CONFIG_SYS_EXTBDINFO */
#if defined(CONFIG_SC3)
sc3_read_eeprom();
#endif
-#if defined (CFG_ID_EEPROM) || defined (CFG_I2C_MAC_OFFSET)
+#if defined (CONFIG_ID_EEPROM) || defined (CONFIG_SYS_I2C_MAC_OFFSET)
mac_read_from_eeprom();
#endif
- s = getenv ("ethaddr");
-#if defined (CONFIG_MBX) || \
- defined (CONFIG_RPXCLASSIC) || \
- defined(CONFIG_IAD210) || \
- defined(CONFIG_V38B)
- if (s == NULL)
- board_get_enetaddr (bd->bi_enetaddr);
- else
-#endif
- for (i = 0; i < 6; ++i) {
- bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
#ifdef CONFIG_HERMES
if ((gd->board_type >> 16) == 2)
bd->bi_ethspeed = gd->board_type & 0xFFFF;
bd->bi_ethspeed = 0xFFFF;
#endif
-#ifdef CONFIG_NX823
- load_sernum_ethaddr ();
-#endif
-
+#ifdef CONFIG_CMD_NET
+ /* kept around for legacy kernels only ... ignore the next section */
+ eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
#ifdef CONFIG_HAS_ETH1
- /* handle the 2nd ethernet address */
-
- s = getenv ("eth1addr");
-
- for (i = 0; i < 6; ++i) {
- bd->bi_enet1addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
+ eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr);
#endif
#ifdef CONFIG_HAS_ETH2
- /* handle the 3rd ethernet address */
-
- s = getenv ("eth2addr");
-#if defined(CONFIG_XPEDITE1K) || defined(CONFIG_METROBOX) || defined(CONFIG_KAREF)
- if (s == NULL)
- board_get_enetaddr(bd->bi_enet2addr);
- else
-#endif
- for (i = 0; i < 6; ++i) {
- bd->bi_enet2addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
+ eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr);
#endif
-
#ifdef CONFIG_HAS_ETH3
- /* handle 4th ethernet address */
- s = getenv("eth3addr");
-#if defined(CONFIG_XPEDITE1K) || defined(CONFIG_METROBOX) || defined(CONFIG_KAREF)
- if (s == NULL)
- board_get_enetaddr(bd->bi_enet3addr);
- else
+ eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr);
#endif
- for (i = 0; i < 6; ++i) {
- bd->bi_enet3addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
- if (s)
- s = (*e) ? e + 1 : e;
- }
+#ifdef CONFIG_HAS_ETH4
+ eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr);
#endif
-
-#if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
- defined(CONFIG_TQM8272) || \
- defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || \
- defined(CONFIG_KUP4X) || defined(CONFIG_PCS440EP)
- load_sernum_ethaddr ();
+#ifdef CONFIG_HAS_ETH5
+ eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr);
#endif
+#endif /* CONFIG_CMD_NET */
+
/* IP Address */
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
WATCHDOG_RESET ();
+#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */
+ dtt_init ();
+#endif
#if defined(CONFIG_CMD_SCSI)
WATCHDOG_RESET ();
puts ("SCSI: ");
scsi_init ();
#endif
+#ifdef CONFIG_GENERIC_MMC
+ WATCHDOG_RESET ();
+ puts ("MMC: ");
+ mmc_initialize (bd);
+#endif
+
#if defined(CONFIG_CMD_DOC)
WATCHDOG_RESET ();
puts ("DOC: ");
#endif
#endif
-#if defined(CONFIG_CMD_SATA)
- puts ("SATA: ");
- sata_initialize ();
-#endif
-
#ifdef CONFIG_LAST_STAGE_INIT
WATCHDOG_RESET ();
/*
for (;;);
}
-#ifdef CONFIG_MODEM_SUPPORT
-/* called from main loop (common/main.c) */
-/* 'inline' - We have to do it fast */
-static inline void mdm_readline(char *buf, int bufsiz)
-{
- char c;
- char *p;
- int n;
-
- n = 0;
- p = buf;
- for(;;) {
- c = serial_getc();
-
- /* dbg("(%c)", c); */
-
- switch(c) {
- case '\r':
- break;
- case '\n':
- *p = '\0';
- return;
-
- default:
- if(n++ > bufsiz) {
- *p = '\0';
- return; /* sanity check */
- }
- *p = c;
- p++;
- break;
- }
- }
-}
-
-extern void dbg(const char *fmt, ...);
-int mdm_init (void)
-{
- char env_str[16];
- char *init_str;
- int i;
- extern char console_buffer[];
- extern void enable_putc(void);
- extern int hwflow_onoff(int);
-
- enable_putc(); /* enable serial_putc() */
-
-#ifdef CONFIG_HWFLOW
- init_str = getenv("mdm_flow_control");
- if (init_str && (strcmp(init_str, "rts/cts") == 0))
- hwflow_onoff (1);
- else
- hwflow_onoff(-1);
-#endif
-
- for (i = 1;;i++) {
- sprintf(env_str, "mdm_init%d", i);
- if ((init_str = getenv(env_str)) != NULL) {
- serial_puts(init_str);
- serial_puts("\n");
- for(;;) {
- mdm_readline(console_buffer, CFG_CBSIZE);
- dbg("ini%d: [%s]", i, console_buffer);
-
- if ((strcmp(console_buffer, "OK") == 0) ||
- (strcmp(console_buffer, "ERROR") == 0)) {
- dbg("ini%d: cmd done", i);
- break;
- } else /* in case we are originating call ... */
- if (strncmp(console_buffer, "CONNECT", 7) == 0) {
- dbg("ini%d: connect", i);
- return 0;
- }
- }
- } else
- break; /* no init string - stop modem init */
-
- udelay(100000);
- }
-
- udelay(100000);
-
- /* final stage - wait for connect */
- for(;i > 1;) { /* if 'i' > 1 - wait for connection
- message from modem */
- mdm_readline(console_buffer, CFG_CBSIZE);
- dbg("ini_f: [%s]", console_buffer);
- if (strncmp(console_buffer, "CONNECT", 7) == 0) {
- dbg("ini_f: connected");
- return 0;
- }
- }
-
- return 0;
-}
-
-#endif
#if 0 /* We could use plain global data, but the resulting code is bigger */
/*
*/
#undef XTRN_DECLARE_GLOBAL_DATA_PTR
#define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */
-DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
#endif /* 0 */
/************************************************************************/
projects / J-u-boot.git / blobdiff