/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Logical memory blocks.
+ *
+ * Copyright (C) 2001 Peter Bergner, IBM Corp.
+ */
+
#ifndef _LINUX_LMB_H
#define _LINUX_LMB_H
+
#ifdef __KERNEL__
#include <alist.h>
#include <asm/u-boot.h>
#include <linux/bitops.h>
-/*
- * Logical memory blocks.
- *
- * Copyright (C) 2001 Peter Bergner, IBM Corp.
- */
+#define LMB_ALLOC_ANYWHERE 0
+#define LMB_ALIST_INITIAL_SIZE 4
/**
- * enum lmb_flags - definition of memory region attributes
- * @LMB_NONE: no special request
- * @LMB_NOMAP: don't add to mmu configuration
+ * DOC: Memory region attribute flags.
+ *
+ * %LMB_NONE: No special request
+ * %LMB_NOMAP: Don't add to MMU configuration
+ * %LMB_NOOVERWRITE: The memory region cannot be overwritten/re-reserved
+ * %LMB_NONOTIFY: Do not notify other modules of changes to this memory region
*/
-enum lmb_flags {
- LMB_NONE = 0,
- LMB_NOMAP = BIT(1),
- LMB_NOOVERWRITE = BIT(2),
-};
+#define LMB_NONE 0
+#define LMB_NOMAP BIT(0)
+#define LMB_NOOVERWRITE BIT(1)
+#define LMB_NONOTIFY BIT(2)
/**
- * struct lmb_region - Description of one region.
- *
- * @base: Base address of the region.
- * @size: Size of the region
- * @flags: memory region attributes
+ * struct lmb_region - Description of one region
+ * @base: Base address of the region
+ * @size: Size of the region
+ * @flags: Memory region attributes
*/
struct lmb_region {
phys_addr_t base;
phys_size_t size;
- enum lmb_flags flags;
+ u32 flags;
};
/**
* struct lmb - The LMB structure
- *
- * @free_mem: List of free memory regions
- * @used_mem: List of used/reserved memory regions
+ * @free_mem: List of free memory regions
+ * @used_mem: List of used/reserved memory regions
+ * @test: Is structure being used for LMB tests
*/
struct lmb {
struct alist free_mem;
struct alist used_mem;
+ bool test;
};
/**
- * lmb_init() - Initialise the LMB module
+ * lmb_init() - Initialise the LMB module.
+ *
+ * Return: 0 on success, negative error code on failure.
*
* Initialise the LMB lists needed for keeping the memory map. There
- * are two lists, in form of alloced list data structure. One for the
+ * are two lists, in form of allocated list data structure. One for the
* available memory, and one for the used memory. Initialise the two
* lists as part of board init. Add memory to the available memory
* list and reserve common areas by adding them to the used memory
* list.
- *
- * Return: 0 on success, -ve on error
*/
int lmb_init(void);
/**
- * lmb_add_memory() - Add memory range for LMB allocations
+ * lmb_add_memory() - Add memory range for LMB allocations.
*
* Add the entire available memory range to the pool of memory that
* can be used by the LMB module for allocations.
- *
- * Return: None
*/
void lmb_add_memory(void);
long lmb_add(phys_addr_t base, phys_size_t size);
+
+/**
+ * lmb_reserve() - Reserve a memory region (with no special flags)
+ * @base: Base address of the memory region
+ * @size: Size of the memory region
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
long lmb_reserve(phys_addr_t base, phys_size_t size);
+
/**
- * lmb_reserve_flags - Reserve one region with a specific flags bitfield.
+ * lmb_reserve_flags() - Reserve one region with a specific flags bitfield
+ * @base: Base address of the memory region
+ * @size: Size of the memory region
+ * @flags: Flags for the memory region
*
- * @base: base address of the memory region
- * @size: size of the memory region
- * @flags: flags for the memory region
- * Return: 0 if OK, > 0 for coalesced region or a negative error code.
+ * Return:
+ * * %0 - Added successfully, or it's already added (only if LMB_NONE)
+ * * %-EEXIST - The region is already added, and flags != LMB_NONE
+ * * %-1 - Failure
*/
long lmb_reserve_flags(phys_addr_t base, phys_size_t size,
- enum lmb_flags flags);
+ u32 flags);
+
phys_addr_t lmb_alloc(phys_size_t size, ulong align);
phys_addr_t lmb_alloc_base(phys_size_t size, ulong align, phys_addr_t max_addr);
phys_addr_t lmb_alloc_addr(phys_addr_t base, phys_size_t size);
phys_size_t lmb_get_free_size(phys_addr_t addr);
/**
- * lmb_is_reserved_flags() - test if address is in reserved region with flag bits set
+ * lmb_alloc_base_flags() - Allocate specified memory region with specified
+ * attributes
+ * @size: Size of the region requested
+ * @align: Alignment of the memory region requested
+ * @max_addr: Maximum address of the requested region
+ * @flags: Memory region attributes to be set
+ *
+ * Allocate a region of memory with the attributes specified through the
+ * parameter. The max_addr parameter is used to specify the maximum address
+ * below which the requested region should be allocated.
+ *
+ * Return: Base address on success, 0 on error.
+ */
+phys_addr_t lmb_alloc_base_flags(phys_size_t size, ulong align,
+ phys_addr_t max_addr, uint flags);
+
+/**
+ * lmb_alloc_addr_flags() - Allocate specified memory address with specified
+ * attributes
+ * @base: Base Address requested
+ * @size: Size of the region requested
+ * @flags: Memory region attributes to be set
+ *
+ * Allocate a region of memory with the attributes specified through the
+ * parameter. The base parameter is used to specify the base address
+ * of the requested region.
+ *
+ * Return: Base address on success, 0 on error.
+ */
+phys_addr_t lmb_alloc_addr_flags(phys_addr_t base, phys_size_t size,
+ uint flags);
+
+/**
+ * lmb_is_reserved_flags() - Test if address is in reserved region with flag
+ * bits set
+ * @addr: Address to be tested
+ * @flags: Bitmap with bits to be tested
*
* The function checks if a reserved region comprising @addr exists which has
* all flag bits set which are set in @flags.
*
- * @addr: address to be tested
- * @flags: bitmap with bits to be tested
- * Return: 1 if matching reservation exists, 0 otherwise
+ * Return: 1 if matching reservation exists, 0 otherwise.
*/
int lmb_is_reserved_flags(phys_addr_t addr, int flags);
+/**
+ * lmb_free_flags() - Free up a region of memory
+ * @base: Base Address of region to be freed
+ * @size: Size of the region to be freed
+ * @flags: Memory region attributes
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+long lmb_free_flags(phys_addr_t base, phys_size_t size, uint flags);
+
long lmb_free(phys_addr_t base, phys_size_t size);
void lmb_dump_all(void);
void lmb_dump_all_force(void);
+void lmb_arch_add_memory(void);
+
struct lmb *lmb_get(void);
int lmb_push(struct lmb *store);
void lmb_pop(struct lmb *store);
+static inline int lmb_read_check(phys_addr_t addr, phys_size_t len)
+{
+ return lmb_alloc_addr(addr, len) == addr ? 0 : -1;
+}
+
+/**
+ * io_lmb_setup() - Initialize LMB struct
+ * @io_lmb: IO LMB to initialize
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int io_lmb_setup(struct lmb *io_lmb);
+
+/**
+ * io_lmb_teardown() - Tear LMB struct down
+ * @io_lmb: IO LMB to teardown
+ */
+void io_lmb_teardown(struct lmb *io_lmb);
+
+/**
+ * io_lmb_add() - Add an IOVA range for allocations
+ * @io_lmb: LMB to add the space to
+ * @base: Base Address of region to add
+ * @size: Size of the region to add
+ *
+ * Add the IOVA space [base, base + size] to be managed by io_lmb.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+long io_lmb_add(struct lmb *io_lmb, phys_addr_t base, phys_size_t size);
+
+/**
+ * io_lmb_alloc() - Allocate specified IO memory address with specified
+ * alignment
+ * @io_lmb: LMB to alloc from
+ * @size: Size of the region requested
+ * @align: Required address and size alignment
+ *
+ * Allocate a region of IO memory. The base parameter is used to specify the
+ * base address of the requested region.
+ *
+ * Return: Base IO address on success, 0 on error.
+ */
+phys_addr_t io_lmb_alloc(struct lmb *io_lmb, phys_size_t size, ulong align);
+
+/**
+ * io_lmb_free() - Free up a region of IOVA space
+ * @io_lmb: LMB to return the IO address space to
+ * @base: Base Address of region to be freed
+ * @size: Size of the region to be freed
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+long io_lmb_free(struct lmb *io_lmb, phys_addr_t base, phys_size_t size);
+
#endif /* __KERNEL__ */
#endif /* _LINUX_LMB_H */
projects / J-u-boot.git / blobdiff