MPC83xx: add define for global half-strength enable (HSE)

[J-u-boot.git] / include / i2c.h

diff --git a/include/i2c.h b/include/i2c.h
index 6e6c84531277e7683ac3dc98e05bee929054df06..8ceb4c852149425c91377dc2a8d56e2bfd7c6c5a 100644 (file)
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -47,24 +47,60 @@
 #define I2C_RXTX_LEN   128     /* maximum tx/rx buffer length */
 
 #if defined(CONFIG_I2C_MULTI_BUS)
-#define CFG_MAX_I2C_BUS                2
+#if !defined(CONFIG_SYS_MAX_I2C_BUS)
+#define CONFIG_SYS_MAX_I2C_BUS         2
+#endif
 #define I2C_GET_BUS()          i2c_get_bus_num()
 #define I2C_SET_BUS(a)         i2c_set_bus_num(a)
 #else
-#define CFG_MAX_I2C_BUS                1
+#define CONFIG_SYS_MAX_I2C_BUS         1
 #define I2C_GET_BUS()          0
 #define I2C_SET_BUS(a)
 #endif
 
 /* define the I2C bus number for RTC and DTT if not already done */
-#if !defined(CFG_RTC_BUS_NUM)
-#define CFG_RTC_BUS_NUM                0
+#if !defined(CONFIG_SYS_RTC_BUS_NUM)
+#define CONFIG_SYS_RTC_BUS_NUM         0
+#endif
+#if !defined(CONFIG_SYS_DTT_BUS_NUM)
+#define CONFIG_SYS_DTT_BUS_NUM         0
+#endif
+#if !defined(CONFIG_SYS_SPD_BUS_NUM)
+#define CONFIG_SYS_SPD_BUS_NUM         0
+#endif
+
+#ifndef I2C_SOFT_DECLARATIONS
+# if defined(CONFIG_MPC8260)
+#  define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
+# elif defined(CONFIG_8xx)
+#  define I2C_SOFT_DECLARATIONS        volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+# elif (defined(CONFIG_AT91RM9200) || \
+       defined(CONFIG_AT91SAM9260) ||  defined(CONFIG_AT91SAM9261) || \
+       defined(CONFIG_AT91SAM9263)) && !defined(CONFIG_AT91_LEGACY)
+#  define I2C_SOFT_DECLARATIONS        at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+# else
+#  define I2C_SOFT_DECLARATIONS
+# endif
+#endif
+
+#ifdef CONFIG_8xx
+/* Set default value for the I2C bus speed on 8xx. In the
+ * future, we'll define these in all 8xx board config files.
+ */
+#ifndef        CONFIG_SYS_I2C_SPEED
+#define        CONFIG_SYS_I2C_SPEED    50000
 #endif
-#if !defined(CFG_DTT_BUS_NUM)
-#define CFG_DTT_BUS_NUM                0
 #endif
-#if !defined(CFG_SPD_BUS_NUM)
-#define CFG_SPD_BUS_NUM                0
+
+/*
+ * Many boards/controllers/drivers don't support an I2C slave interface so
+ * provide a default slave address for them for use in common code.  A real
+ * value for CONFIG_SYS_I2C_SLAVE should be defined for any board which does
+ * support a slave interface.
+ */
+#ifndef        CONFIG_SYS_I2C_SLAVE
+#define        CONFIG_SYS_I2C_SLAVE    0xfe
 #endif
 
 /*
@@ -72,8 +108,30 @@
  * repeatedly to change the speed and slave addresses.
  */
 void i2c_init(int speed, int slaveaddr);
-#ifdef CFG_I2C_INIT_BOARD
 void i2c_init_board(void);
+#ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
+void i2c_board_late_init(void);
+#endif
+
+#if defined(CONFIG_I2C_MUX)
+
+typedef struct _mux {
+       uchar   chip;
+       uchar   channel;
+       char    *name;
+       struct _mux     *next;
+} I2C_MUX;
+
+typedef struct _mux_device {
+       int     busid;
+       I2C_MUX *mux;   /* List of muxes, to reach the device */
+       struct _mux_device      *next;
+} I2C_MUX_DEVICE;
+
+I2C_MUX_DEVICE *i2c_mux_search_device(int id);
+I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf);
+int i2x_mux_select_mux(int bus);
+int i2c_mux_ident_muxstring_f (uchar *buf);
 #endif
 
 /*
@@ -100,8 +158,38 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len);
 /*
  * Utility routines to read/write registers.
  */
-uchar i2c_reg_read (uchar chip, uchar reg);
-void  i2c_reg_write(uchar chip, uchar reg, uchar val);
+static inline u8 i2c_reg_read(u8 addr, u8 reg)
+{
+       u8 buf;
+
+#ifdef CONFIG_8xx
+       /* MPC8xx needs this.  Maybe one day we can get rid of it. */
+       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+#ifdef DEBUG
+       printf("%s: addr=0x%02x, reg=0x%02x\n", __func__, addr, reg);
+#endif
+
+       i2c_read(addr, reg, 1, &buf, 1);
+
+       return buf;
+}
+
+static inline void i2c_reg_write(u8 addr, u8 reg, u8 val)
+{
+#ifdef CONFIG_8xx
+       /* MPC8xx needs this.  Maybe one day we can get rid of it. */
+       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+#ifdef DEBUG
+       printf("%s: addr=0x%02x, reg=0x%02x, val=0x%02x\n",
+              __func__, addr, reg, val);
+#endif
+
+       i2c_write(addr, reg, 1, &val, 1);
+}
 
 /*
  * Functions for setting the current I2C bus and its speed
@@ -113,9 +201,9 @@ void  i2c_reg_write(uchar chip, uchar reg, uchar val);
  *  Change the active I2C bus.  Subsequent read/write calls will
  *  go to this one.
  *
- *     bus - bus index, zero based
+ *     bus - bus index, zero based
  *
- *     Returns: 0 on success, not 0 on failure
+ *     Returns: 0 on success, not 0 on failure
  *
  */
 int i2c_set_bus_num(unsigned int bus);
@@ -133,9 +221,9 @@ unsigned int i2c_get_bus_num(void);
  *
  *  Change the speed of the active I2C bus
  *
- *     speed - bus speed in Hz
+ *     speed - bus speed in Hz
  *
- *     Returns: 0 on success, not 0 on failure
+ *     Returns: 0 on success, not 0 on failure
  *
  */
 int i2c_set_bus_speed(unsigned int);