Move CONFIG_OF_LIBFDT to Kconfig

[J-u-boot.git] / include / configs / mx6ul_14x14_evk.h

diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
index 6ae736f15492f50f3c303bf4dc95048abc5f1daf..2fff34a725c1e3203f49add1505578ae01dbfef4 100644 (file)
--- a/include/configs/mx6ul_14x14_evk.h
+++ b/include/configs/mx6ul_14x14_evk.h
@@ -14,15 +14,15 @@
 #include "mx6_common.h"
 #include <asm/imx-common/gpio.h>
 
+#define is_mx6ul_9x9_evk()     CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
+
 /* SPL options */
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
 #include "imx6_spl.h"
 
-#define CONFIG_MX6
-#define CONFIG_ROM_UNIFIED_SECTIONS
-#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
@@ -35,11 +35,6 @@
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
 /* MMC Configs */
 #ifdef CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC2_BASE_ADDR
@@ -54,24 +49,21 @@
 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 #endif
 
-#undef CONFIG_BOOTM_NETBSD
-#undef CONFIG_BOOTM_PLAN9
-#undef CONFIG_BOOTM_RTEMS
-
-#undef CONFIG_CMD_EXPORTENV
-#undef CONFIG_CMD_IMPORTENV
-
 /* I2C configs */
 #define CONFIG_CMD_I2C
 #ifdef CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_SPEED           100000
-#endif
-
-#define PHYS_SDRAM_SIZE                        SZ_512M
 
-#undef CONFIG_CMD_IMLS
+/* PMIC only for 9X9 EVK */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE3000
+#define CONFIG_POWER_PFUZE3000_I2C_ADDR  0x08
+#endif
 
 #define CONFIG_SYS_MMC_IMG_LOAD_PART   1
 
@@ -81,10 +73,11 @@
        "console=ttymxc0\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
-       "fdt_file=imx6ul-14x14-evk.dtb\0" \
+       "fdt_file=undefined\0" \
        "fdt_addr=0x83000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
+       "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
        "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
        "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
        "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
@@ -135,9 +128,19 @@
                        "fi; " \
                "else " \
                        "bootz; " \
-               "fi;\0"
+               "fi;\0" \
+               "findfdt="\
+                       "if test $fdt_file = undefined; then " \
+                               "if test $board_name = EVK && test $board_rev = 9X9; then " \
+                                       "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
+                               "if test $board_name = EVK && test $board_rev = 14X14; then " \
+                                       "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
+                               "if test $fdt_file = undefined; then " \
+                                       "echo WARNING: Could not determine dtb to use; fi; " \
+                       "fi;\0" \
 
 #define CONFIG_BOOTCOMMAND \
+          "run findfdt;" \
           "mmc dev ${mmcdev};" \
           "mmc dev ${mmcdev}; if mmc rescan; then " \
                   "if run loadbootscript; then " \
@@ -151,12 +154,9 @@
           "else run netboot; fi"
 
 /* Miscellaneous configurable options */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x10000000)
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x8000000)
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_HZ                  1000
@@ -187,7 +187,6 @@
 #define CONFIG_SYS_MMC_ENV_PART                0       /* user area */
 #define CONFIG_MMCROOT                 "/dev/mmcblk1p2"  /* USDHC2 */
 
-#define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_BMODE
 
@@ -199,12 +198,12 @@
 #ifdef CONFIG_FSL_QSPI
 #define CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SPI_FLASH_BAR
 #define CONFIG_SF_DEFAULT_BUS          0
 #define CONFIG_SF_DEFAULT_CS           0
 #define CONFIG_SF_DEFAULT_SPEED        40000000
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
+#define CONFIG_SPI_FLASH_STMICRO
 #define FSL_QSPI_FLASH_NUM             1
 #define FSL_QSPI_FLASH_SIZE            SZ_32M
 #endif
@@ -221,6 +220,45 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #endif
 
-#define CONFIG_IMX6_THERMAL
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define CONFIG_FEC_ENET_DEV            1
+
+#if (CONFIG_FEC_ENET_DEV == 0)
+#define IMX_FEC_BASE                   ENET_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR          0x2
+#define CONFIG_FEC_XCV_TYPE             RMII
+#elif (CONFIG_FEC_ENET_DEV == 1)
+#define IMX_FEC_BASE                   ENET2_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR         0x1
+#define CONFIG_FEC_XCV_TYPE            RMII
+#endif
+#define CONFIG_ETHPRIME                        "FEC"
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#endif
+
+#define CONFIG_IMX_THERMAL
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_VIDEO
+#ifdef CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_MXS
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
+#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
+#endif
+#endif
 
 #endif