config: Move CONFIG_BOARD_LATE_INIT to defconfigs

[J-u-boot.git] / include / configs / mx6ul_14x14_evk.h

diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
index d8a4f16122383ea61daf14ce0247cd1d8f9ca5a1..2faa10c55d76dcd79faaf8921df5387fce194900 100644 (file)
--- a/include/configs/mx6ul_14x14_evk.h
+++ b/include/configs/mx6ul_14x14_evk.h
@@ -8,37 +8,26 @@
 #ifndef __MX6UL_14X14_EVK_CONFIG_H
 #define __MX6UL_14X14_EVK_CONFIG_H
 
-
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
 #include "mx6_common.h"
 #include <asm/imx-common/gpio.h>
 
+#define is_mx6ul_9x9_evk()     CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
+
 /* SPL options */
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
 #include "imx6_spl.h"
 
-#define CONFIG_ROM_UNIFIED_SECTIONS
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (16 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
-#define CONFIG_CMD_FUSE
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
 /* MMC Configs */
 #ifdef CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC2_BASE_ADDR
@@ -50,27 +39,22 @@
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 #endif
 
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 #endif
 
-#undef CONFIG_BOOTM_NETBSD
-#undef CONFIG_BOOTM_PLAN9
-#undef CONFIG_BOOTM_RTEMS
-
-#undef CONFIG_CMD_EXPORTENV
-#undef CONFIG_CMD_IMPORTENV
-
 /* I2C configs */
-#define CONFIG_CMD_I2C
 #ifdef CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_SPEED           100000
-#endif
 
-#define PHYS_SDRAM_SIZE                        SZ_512M
-
-#undef CONFIG_CMD_IMLS
+/* PMIC only for 9X9 EVK */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE3000
+#define CONFIG_POWER_PFUZE3000_I2C_ADDR  0x08
+#endif
 
 #define CONFIG_SYS_MMC_IMG_LOAD_PART   1
 
@@ -80,10 +64,11 @@
        "console=ttymxc0\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
-       "fdt_file=imx6ul-14x14-evk.dtb\0" \
+       "fdt_file=undefined\0" \
        "fdt_addr=0x83000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
+       "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
        "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
        "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
        "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
@@ -134,9 +119,19 @@
                        "fi; " \
                "else " \
                        "bootz; " \
-               "fi;\0"
+               "fi;\0" \
+               "findfdt="\
+                       "if test $fdt_file = undefined; then " \
+                               "if test $board_name = EVK && test $board_rev = 9X9; then " \
+                                       "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
+                               "if test $board_name = EVK && test $board_rev = 14X14; then " \
+                                       "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
+                               "if test $fdt_file = undefined; then " \
+                                       "echo WARNING: Could not determine dtb to use; fi; " \
+                       "fi;\0" \
 
 #define CONFIG_BOOTCOMMAND \
+          "run findfdt;" \
           "mmc dev ${mmcdev};" \
           "mmc dev ${mmcdev}; if mmc rescan; then " \
                   "if run loadbootscript; then " \
@@ -150,12 +145,8 @@
           "else run netboot; fi"
 
 /* Miscellaneous configurable options */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80000000
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x10000000)
+#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x8000000)
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_HZ                  1000
@@ -186,20 +177,12 @@
 #define CONFIG_SYS_MMC_ENV_PART                0       /* user area */
 #define CONFIG_MMCROOT                 "/dev/mmcblk1p2"  /* USDHC2 */
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_BMODE
 
 #ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
 #endif
 
-#define CONFIG_FSL_QSPI
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_BAR
 #define CONFIG_SF_DEFAULT_BUS          0
 #define CONFIG_SF_DEFAULT_CS           0
 #define CONFIG_SF_DEFAULT_SPEED        40000000
@@ -209,11 +192,9 @@
 #endif
 
 /* USB Configs */
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
@@ -238,9 +219,22 @@
 
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
-#define CONFIG_FEC_DMA_MINALIGN                64
 #endif
 
 #define CONFIG_IMX_THERMAL
 
+#ifndef CONFIG_SPL_BUILD
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_MXS
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
+#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
+#endif
+#endif
+
 #endif