]> Git Repo - J-u-boot.git/blobdiff - configs/cardhu_defconfig
rockchip: rk3288-firefly: Change to use FIT
[J-u-boot.git] / configs / cardhu_defconfig
index 00fea793f921154a7770d1a0bd8f707f737c74d2..57978de66e1a1c28a779af27e5d5e745cbf56eb0 100644 (file)
@@ -4,29 +4,29 @@ CONFIG_SYS_L2CACHE_OFF=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_TEXT_BASE=0x80110000
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SOURCE_FILE="cardhu"
 CONFIG_SF_DEFAULT_SPEED=24000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFFE000
 CONFIG_DEFAULT_DEVICE_TREE="tegra30-cardhu"
-CONFIG_SPL_TEXT_BASE=0x80108000
-CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # "
 CONFIG_SPL_STACK=0x800ffffc
+CONFIG_SPL_TEXT_BASE=0x80108000
+CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_TEGRA30=y
 CONFIG_TARGET_CARDHU=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
 CONFIG_PCI=y
 CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_SYS_PBSIZE=2084
 CONFIG_CONSOLE_MUX=y
 CONFIG_SYS_STDIO_DEREGISTER=y
 CONFIG_SPL_FOOTPRINT_LIMIT=y
 CONFIG_SPL_MAX_FOOTPRINT=0x8000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000
-CONFIG_SYS_SPL_MALLOC_SIZE=0x10000
-CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_PBSIZE=2084
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x10000
+CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # "
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
@@ -35,14 +35,12 @@ CONFIG_CMD_PCI=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
 CONFIG_CMD_EXT4_WRITE=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_PART=2
-CONFIG_SPL_DM=y
 CONFIG_SYS_I2C_TEGRA=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_RTL8169=y
This page took 0.029572 seconds and 4 git commands to generate.