serial: remove altera serial initializations

[J-u-boot.git] / include / configs / digsy_mtc.h

diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index d541160bd39b153f2f48c95bdddada6b061cf98c..02b8f91d339a3b4cbe86ca0cf1b97ba04abec7d9 100644 (file)
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@ -10,23 +10,7 @@
  * (C) Copyright 2009 Semihalf
  * Optimized for digsyMTC by: Grzegorz Bernacki <[email protected]>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software\; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation\; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY\; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program\; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -36,9 +20,10 @@
  * High Level Configuration Options
  */
 
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200         1       /* (more precisely an MPC5200 CPU) */
+#define CONFIG_MPC5200         1       /* This is an MPC5200 CPU */
 #define CONFIG_DIGSY_MTC       1       /* ... on InterControl digsyMTC board */
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_GENERIC_BOARD
 
 /*
  * Valid values for CONFIG_SYS_TEXT_BASE are:
@@ -70,6 +55,7 @@
 #define CONFIG_PCI             1
 #define CONFIG_PCI_PNP         1
 #define CONFIG_PCI_SCAN_SHOW   1
+#define CONFIG_PCI_BOOTDELAY   250
 
 #define CONFIG_PCI_MEM_BUS     0x40000000
 #define CONFIG_PCI_MEM_PHYS    CONFIG_PCI_MEM_BUS
@@ -86,17 +72,41 @@
 #define CONFIG_BZIP2
 
 /*
- * Command line configuration.
+ * Video
  */
-#include <config_cmd_default.h>
+#define CONFIG_VIDEO
+
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_MB862xx
+#define CONFIG_VIDEO_MB862xx_ACCEL
+#define CONFIG_VIDEO_CORALP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)       /* decompressed img */
+
+/* Coral-PA clock frequency, geo and other both 133MHz */
+#define CONFIG_SYS_MB862xx_CCF 0x00050000
+/* Video SDRAM parameters */
+#define CONFIG_SYS_MB862xx_MMR 0x11d7fa72
+#endif
 
-#define CONFIG_CMD_DFL
+/*
+ * Command line configuration.
+ */
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#endif
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DIAG
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_I2C
@@ -249,9 +259,16 @@
 /*
  * RTC configuration
  */
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_I2C_RTC_ADDR        0x56
+#define CONFIG_RTC_RV3029
+/* Enable 5k Ohm trickle charge resistor */
+#define CONFIG_SYS_RV3029_TCR  0x20
+#else
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_I2C_RTC_ADDR        0x68
 #define CONFIG_SYS_DS1339_TCR_VAL      0xAB    /* diode + 4k resistor */
+#endif
 
 /*
  * Flash configuration
@@ -259,14 +276,24 @@
 #define        CONFIG_SYS_FLASH_CFI            1
 #define        CONFIG_FLASH_CFI_DRIVER 1
 
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_FLASH_BASE          0xFE000000
+#define CONFIG_SYS_FLASH_BASE_CS1      0xFC000000
+#define CONFIG_SYS_MAX_FLASH_BANKS     2
+#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE, \
+                                       CONFIG_SYS_FLASH_BASE_CS1}
+#define CONFIG_SYS_UPDATE_FLASH_SIZE
+#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
+#else
 #define CONFIG_SYS_FLASH_BASE          0xFF000000
-#define CONFIG_SYS_FLASH_SIZE  0x01000000
-
 #define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
+#endif
+
 #define CONFIG_SYS_MAX_FLASH_SECT      256
 #define CONFIG_FLASH_16BIT
 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_SIZE  0x01000000
 #define CONFIG_SYS_FLASH_ERASE_TOUT    240000
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500
 
@@ -328,7 +355,11 @@
  */
 #define CONFIG_MPC5xxx_FEC     1
 #define CONFIG_MPC5xxx_FEC_MII100
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_PHY_ADDR                0x01
+#else
 #define CONFIG_PHY_ADDR                0x00
+#endif
 #define CONFIG_PHY_RESET_DELAY 1000
 
 #define CONFIG_NETCONSOLE              /* include NetConsole support   */
@@ -360,13 +391,7 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_AUTO_COMPLETE   1
 #define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_SYS_PROMPT      "=> "
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR      " "
 
 #define CONFIG_LOOPW           1
 #define CONFIG_MX_CYCLIC       1
@@ -384,8 +409,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x00100000
 
-#define CONFIG_SYS_HZ                  1000
-
 /*
  * Various low-level settings
  */
@@ -409,6 +432,12 @@
 #define CONFIG_SYS_CS0_SIZE            CONFIG_SYS_FLASH_SIZE
 #define CONFIG_SYS_CS0_CFG             0x0002DD00
 
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_CS1_START           CONFIG_SYS_FLASH_BASE_CS1
+#define CONFIG_SYS_CS1_SIZE            CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS1_CFG             0x0002DD00
+#endif
+
 #define CONFIG_SYS_CS_BURST            0x00000000
 #define CONFIG_SYS_CS_DEADCYCLE        0x11111111