ARM: k2g: Add ddr3 info

[J-u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 9919314f0a5114a9e32b56ad1c6ad299c0e36c91..d4c35ba09d71468b9b78e9e0da26d7e37efaa2dc 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2015
 PATCHLEVEL = 10
 SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION =
 NAME =
 
 # *DOCUMENTATION*
@@ -901,7 +901,7 @@ MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
        -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
 
 MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
-       -T kwbimage -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE)
+       -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
 
 MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
                -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
@@ -909,8 +909,18 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
        $(call if_changed,mkimage)
 
-u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
+# If the kwboot xmodem protocol is used, to boot U-Boot on the MVEBU
+# SoC's, the SPL U-Boot returns to the BootROM after it completes
+# the SDRAM setup. The BootROM expects no U-Boot header in the main
+# U-Boot image. So we need to combine SPL and u-boot.bin instead of
+# u-boot.img in this case.
+ifdef CONFIG_MVEBU_BOOTROM_UARTBOOT
+u-boot-spl.kwb: u-boot-dtb.bin spl/u-boot-spl.bin FORCE
+       $(call if_changed,mkimage)
+else
+u-boot-spl.kwb: u-boot-dtb.img spl/u-boot-spl.bin FORCE
        $(call if_changed,mkimage)
+endif
 
 MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
 
@@ -1004,22 +1014,6 @@ OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
 u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
        $(call if_changed,pad_cat)
 
-MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \
-       -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL
-spl/u-boot-spl.gph: spl/u-boot-spl.bin FORCE
-       $(call if_changed,mkimage)
-
-OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
-                         --gap-fill=0
-u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE
-       $(call if_changed,pad_cat)
-
-MKIMAGEFLAGS_u-boot-nand.gph = -A $(ARCH) -T gpimage -C none \
-       -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot
-u-boot-nand.gph: u-boot.bin FORCE
-       $(call if_changed,mkimage)
-       @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@
-
 ifneq ($(CONFIG_ARCH_SOCFPGA),)
 quiet_cmd_socboot = SOCBOOT $@
 cmd_socboot = cat      spl/u-boot-spl-dtb.sfp spl/u-boot-spl-dtb.sfp   \
@@ -1040,6 +1034,7 @@ IFDTOOL_FLAGS  = -f 0:$(objtree)/u-boot.dtb
 IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
 IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin
 IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
+IFDTOOL_FLAGS += -C
 
 ifneq ($(CONFIG_HAVE_INTEL_ME),)
 IFDTOOL_ME_FLAGS  = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
@@ -1278,11 +1273,31 @@ define filechk_version.h
        echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
 endef
 
+# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
+# The BSD date on the other hand behaves different and would produce errors
+# with the misused '-d' switch.  Respect that and search a working date with
+# well known pre- and suffixes for the GNU variant of date.
 define filechk_timestamp.h
-       (SOURCE_DATE="$${SOURCE_DATE_EPOCH:+@$$SOURCE_DATE_EPOCH}"; \
-       LC_ALL=C date -u -d "$${SOURCE_DATE:-now}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
-       LC_ALL=C date -u -d "$${SOURCE_DATE:-now}" +'#define U_BOOT_TIME "%T"'; \
-       LC_ALL=C date -u -d "$${SOURCE_DATE:-now}" +'#define U_BOOT_TZ "%z"' )
+       (if test -n "$${SOURCE_DATE_EPOCH}"; then \
+               SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
+               DATE=""; \
+               for date in gdate date.gnu date; do \
+                       $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
+               done; \
+               if test -n "$${DATE}"; then \
+                       LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
+                       LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
+                       LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
+                       LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
+               else \
+                       return 42; \
+               fi; \
+       else \
+               LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
+               LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
+               LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
+               LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
+       fi)
 endef
 
 $(version_h): include/config/uboot.release FORCE