#include <malloc.h>
#include <devices.h>
-#ifdef CONFIG_M5272
-#include <asm/immap_5272.h>
-#endif
+#include <asm/immap.h>
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
#include <ide.h>
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
+#if defined(CONFIG_CMD_SCSI)
#include <scsi.h>
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#include <kgdb.h>
#endif
#ifdef CONFIG_STATUS_LED
#include <status_led.h>
#endif
#include <net.h>
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#include <serial.h>
+#if defined(CONFIG_CMD_BEDBUG)
#include <cmd_bedbug.h>
#endif
#ifdef CFG_ALLOC_DPRAM
char *strmhz(char *buf, long hz)
{
- long l, n;
- long m;
+ long l, n;
+ long m;
- n = hz / 1000000L;
+ n = hz / 1000000L;
- l = sprintf (buf, "%ld", n);
+ l = sprintf (buf, "%ld", n);
- m = (hz % 1000000L) / 1000L;
+ m = (hz % 1000000L) / 1000L;
- if (m != 0)
- sprintf (buf+l, ".%03ld", m);
+ if (m != 0)
+ sprintf (buf+l, ".%03ld", m);
- return (buf);
+ return (buf);
}
/*
typedef int (init_fnc_t) (void);
/************************************************************************
- * Init Utilities *
+ * Init Utilities
************************************************************************
* Some of this code should be moved into the core functions,
* but let's get it working (again) first...
*/
init_fnc_t *init_sequence[] = {
+ get_clocks,
env_init,
init_baudrate,
serial_init,
{
bd_t *bd;
ulong len, addr, addr_sp;
+ ulong *paddr;
gd_t *id;
init_fnc_t **init_fnc_ptr;
#ifdef CONFIG_PRAM
debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
#endif /* CONFIG_PRAM */
+ /* round down to next 4 kB limit */
+ addr &= ~(4096 - 1);
+ debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+
+#ifdef CONFIG_LCD
+ /* reserve memory for LCD display (always full pages) */
+ addr = lcd_setmem (addr);
+ gd->fb_base = addr;
+#endif /* CONFIG_LCD */
+
/*
* reserve memory for U-Boot code, data & bss
* round down to next 4 kB limit
debug ("Reserving %d Bytes for Global Data at: %08lx\n",
sizeof (gd_t), addr_sp);
- /* Reserve memory for boot params. */
+ /* Reserve memory for boot params. */
addr_sp -= CFG_BOOTPARAMS_LEN;
bd->bi_boot_params = addr_sp;
debug ("Reserving %dk for boot parameters at: %08lx\n",
*/
addr_sp -= 16;
addr_sp &= ~0xF;
- *((ulong *) addr_sp)-- = 0;
- *((ulong *) addr_sp)-- = 0;
+
+ paddr = (ulong *)addr_sp;
+ *paddr-- = 0;
+ *paddr-- = 0;
+ addr_sp = (ulong)paddr;
+
debug ("Stack Pointer at: %08lx\n", addr_sp);
/*
*/
bd->bi_memstart = CFG_SDRAM_BASE; /* start of DRAM memory */
bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
+#ifdef CFG_INIT_RAM_ADDR
+ bd->bi_sramstart = CFG_INIT_RAM_ADDR; /* start of SRAM memory */
+ bd->bi_sramsize = CFG_INIT_RAM_END; /* size of SRAM memory */
+#endif
bd->bi_mbar_base = CFG_MBAR; /* base of internal registers */
bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
WATCHDOG_RESET ();
bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
+#ifdef CONFIG_PCI
+ bd->bi_pcifreq = gd->pci_clk; /* PCI Freq in Hz */
+#endif
+#ifdef CONFIG_EXTRA_CLOCK
+ bd->bi_inpfreq = gd->inp_clk; /* input Freq in Hz */
+ bd->bi_vcofreq = gd->vco_clk; /* vco Freq in Hz */
+ bd->bi_flbfreq = gd->flb_clk; /* flexbus Freq in Hz */
+#endif
bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
#ifdef CFG_EXTBDINFO
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
+#ifdef CONFIG_SERIAL_MULTI
+ serial_initialize();
+#endif
+
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
WATCHDOG_RESET ();
/*
* Setup trap handlers
*/
- trap_init (0);
+ trap_init (CFG_SDRAM_BASE);
#if !defined(CFG_NO_FLASH)
puts ("FLASH: ");
if (s)
s = (*e) ? e + 1 : e;
}
+#ifdef CONFIG_HAS_ETH1
+ /* handle the 2nd ethernet address */
+
+ s = getenv ("eth1addr");
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enet1addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+#endif
+#ifdef CONFIG_HAS_ETH2
+ /* handle the 3rd ethernet address */
+
+ s = getenv ("eth2addr");
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enet2addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+#endif
+
+#ifdef CONFIG_HAS_ETH3
+ /* handle 4th ethernet address */
+ s = getenv("eth3addr");
+ for (i = 0; i < 6; ++i) {
+ bd->bi_enet3addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+#endif
/* IP Address */
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
WATCHDOG_RESET ();
+#if defined(CONFIG_PCI)
+ /*
+ * Do pci configuration
+ */
+ pci_init ();
+#endif
/** leave this here (after malloc(), environment and PCI are working) **/
/* Initialize devices */
misc_init_r ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
WATCHDOG_RESET ();
puts ("KGDB: ");
kgdb_init ();
if ((s = getenv ("loadaddr")) != NULL) {
load_addr = simple_strtoul (s, NULL, 16);
}
-#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
if ((s = getenv ("bootfile")) != NULL) {
copy_filename (BootFile, s, sizeof (BootFile));
}
-#endif /* CFG_CMD_NET */
+#endif
WATCHDOG_RESET ();
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#if defined(CONFIG_CMD_DOC)
WATCHDOG_RESET ();
puts ("DOC: ");
doc_init ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
WATCHDOG_RESET ();
puts ("NAND: ");
nand_init(); /* go init the NAND */
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET)
+#if defined(CONFIG_CMD_NET)
WATCHDOG_RESET();
+#if defined(FEC_ENET)
eth_init(bd);
#endif
+#if defined(CONFIG_NET_MULTI)
+ puts ("Net: ");
+ eth_initialize (bd);
+#endif
+#endif
#ifdef CONFIG_POST
post_run (NULL, POST_RAM | post_bootmode_get(0));
#endif
+#if defined(CONFIG_CMD_PCMCIA) \
+ && !defined(CONFIG_CMD_IDE)
+ WATCHDOG_RESET ();
+ puts ("PCMCIA:");
+ pcmcia_init ();
+#endif
+
+#if defined(CONFIG_CMD_IDE)
+ WATCHDOG_RESET ();
+ puts ("IDE: ");
+ ide_init ();
+#endif
+
#ifdef CONFIG_LAST_STAGE_INIT
WATCHDOG_RESET ();
/*
last_stage_init ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
WATCHDOG_RESET ();
bedbug_init ();
#endif