Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"

[J-u-boot.git] / configs / p212_defconfig

diff --git a/configs/p212_defconfig b/configs/p212_defconfig
index b6e788b09898c9d38d076e024ec443da2da22f3c..9cf22ca4db75fc4a93aa11e5aaa54f598a753ad0 100644 (file)
--- a/configs/p212_defconfig
+++ b/configs/p212_defconfig
@@ -1,36 +1,56 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MESON=y
+CONFIG_TEXT_BASE=0x01000000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxl-s905x-p212"
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
 CONFIG_MESON_GXL=y
-CONFIG_TARGET_P212=y
+CONFIG_DEBUG_UART_BASE=0xc81004c0
+CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" p212"
-CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905x-p212"
+CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_DEBUG_UART=y
-CONFIG_ENV_IS_NOWHERE=y
+CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_MISC_INIT_R=y
+CONFIG_SYS_MAXARGS=32
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_MMC_MESON_GX=y
-CONFIG_DM_ETH=y
-CONFIG_ETH_DESIGNWARE=y
 CONFIG_PHY_MESON_GXL=y
-CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_MDIO_MUX=y
+CONFIG_ETH_DESIGNWARE_MESON8B=y
+CONFIG_MDIO_MUX_MESON_GXL=y
+CONFIG_MESON_GXL_USB_PHY=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_MESON_GXL=y
-CONFIG_DEBUG_UART_MESON=y
-CONFIG_DEBUG_UART_BASE=0xc81004c0
-CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_DEBUG_UART_SKIP_INIT=y
 CONFIG_MESON_SERIAL=y
-CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_MESON_GXL=y