dm: cpu: Add a new get_count method to cpu uclass

[J-u-boot.git] / include / configs / xaeniax.h

diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 1329f0f3d85a1748162c4a3f0cd5e33e452ea50f..a072464c1081837a379215a7fb82abdc53e72dbf 100644 (file)
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -14,23 +14,7 @@
  *
  * Configuation settings for the xaeniax board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -40,24 +24,21 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_PXA250          1       /* This is an PXA255 CPU    */
+#define CONFIG_CPU_PXA25X              1       /* This is an PXA255 CPU    */
 #define CONFIG_XAENIAX         1       /* on a xaeniax board       */
+#define        CONFIG_SYS_TEXT_BASE    0x0
 
-
-#define BOARD_LATE_INIT                1
-
-
-#undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff */
+#define CONFIG_BOARD_LATE_INIT
 
 /* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
+#define CONFIG_SYS_DCACHE_OFF
 
 /*
  * select serial console configuration
  */
 #define CONFIG_PXA_SERIAL
 #define CONFIG_BTUART         1       /* we use BTUART on XAENIAX */
-
+#define CONFIG_CONS_INDEX      4
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -66,9 +47,6 @@
 
 #define CONFIG_BAUDRATE                115200
 
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
-
-
 /*
  * BOOTP options
  */
@@ -81,18 +59,14 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DIAG
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_SNTP
 
 #undef CONFIG_CMD_DTT
 
 
-#define CONFIG_ETHADDR         08:00:3e:26:0a:5b
 #define CONFIG_NETMASK         255.255.255.0
 #define CONFIG_IPADDR          192.168.68.201
 #define CONFIG_SERVERIP                192.168.68.62
@@ -106,7 +80,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200                  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  1                       /* which serial port to use */
 #endif
 
 /*
@@ -114,7 +87,6 @@
  * used for the RAM copy of the uboot code
  */
 #define CONFIG_SYS_MALLOC_LEN      (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 
 /*
  * Miscellaneous configurable options
@@ -122,7 +94,6 @@
 #define CONFIG_SYS_LONGHELP                            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         1
 
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 #ifdef CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT              "u-boot$ "      /* Monitor Command Prompt */
@@ -140,7 +111,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0xa1000000      /* default load address */
 
-#define CONFIG_SYS_HZ                  1000
 #define CONFIG_SYS_CPUSPEED            0x141           /* set core clock to 400/200/100 MHz */
 
 /*
@@ -167,6 +137,9 @@
 
 #define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
 
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define        CONFIG_SYS_INIT_SP_ADDR         0xfffff800
+
 /*
  * FLASH and environment organization
  */
@@ -182,21 +155,9 @@
 #define CONFIG_ENV_ADDR                (PHYS_FLASH_1 + 0x40000)/* Addr of Environment Sector   */
 #define CONFIG_ENV_SIZE                0x40000                 /* Total Size of Environment Sector     */
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128*1024)      /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4*1024)        /* FIQ stack */
-#endif
-
 /*
  * SMSC91C111 Network Card
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111                1
 #define CONFIG_SMC91111_BASE           0x10000300  /* chip select 3         */
 #define CONFIG_SMC_USE_32_BIT          1          /* 32 bit bus  */
@@ -434,8 +395,9 @@
  */
 #define CONFIG_SYS_PSSR_VAL            0x00000030
 
-#define CONFIG_SYS_CKEN_VAL            0x00000080  /*  */
-#define CONFIG_SYS_ICMR_VAL            0x00000000  /* No interrupts enabled        */
+#define CONFIG_SYS_CKEN                        0x00000080  /*  */
+#define CONFIG_SYS_ICMR                        0x00000000  /* No interrupts enabled        */
+#define        CONFIG_SYS_CCCR                 CCCR_L27|CCCR_M2|CCCR_N10
 
 
 /*
@@ -559,6 +521,9 @@
  */
 #define CONFIG_SYS_MDMRS_VAL           0x00320032
 
+#define        CONFIG_SYS_FLYCNFG_VAL          0x00000000
+#define        CONFIG_SYS_SXCNFG_VAL           0x00000000
+
 /*
  * PCMCIA and CF Interfaces
  */