xilinx: Enable efi debug command

[J-u-boot.git] / configs / sama5d4ek_mmc_defconfig

diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig
index 661c4e34d14f924a150bce2a3c7e19dcb785bcd0..3aa1fd4bdd831a5697102cf750cfc85c3b0219ba 100644 (file)
--- a/configs/sama5d4ek_mmc_defconfig
+++ b/configs/sama5d4ek_mmc_defconfig
@@ -7,19 +7,21 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x4000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_TEXT_BASE=0x200000
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_ENV_SIZE=0x4000
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfc00c000
 CONFIG_DEBUG_UART_CLOCK=88000000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek"
 CONFIG_DEBUG_UART=y
-CONFIG_SPL_TEXT_BASE=0x200000
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
 CONFIG_SD_BOOT=y
@@ -29,7 +31,6 @@ CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwai
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
@@ -43,9 +44,9 @@ CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek"
 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas"
 CONFIG_ENV_IS_IN_FAT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
@@ -54,13 +55,14 @@ CONFIG_SPL_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_UTMI=y
 CONFIG_AT91_H32MX=y
-CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
-CONFIG_NAND=y
-# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
+CONFIG_ATMEL_NAND_HW_PMECC=y
+CONFIG_PMECC_CAP=8
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=30000000
 CONFIG_SPI_FLASH_ATMEL=y
@@ -70,7 +72,6 @@ CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
-CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_SPI=y
@@ -85,4 +86,6 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_DM_VIDEO=y
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
 CONFIG_ATMEL_HLCD=y