ls1028a: use default scan_dev_for_boot

[J-u-boot.git] / configs / at91sam9x5ek_nandflash_defconfig

diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig
index 8f9efdf98a69be4004a85b902b1598750b469e81..2f39c8235cb918372bee9ce63b58411ca42a9d73 100644 (file)
--- a/configs/at91sam9x5ek_nandflash_defconfig
+++ b/configs/at91sam9x5ek_nandflash_defconfig
@@ -4,9 +4,12 @@ CONFIG_SYS_TEXT_BASE=0x26f00000
 CONFIG_TARGET_AT91SAM9X5EK=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_DM_GPIO=y
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_ENV_OFFSET_REDUND=0x100000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
 CONFIG_DEBUG_UART=y
 CONFIG_FIT=y
 CONFIG_NAND_BOOT=y
@@ -31,15 +34,16 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
-CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_MTD=y
 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
@@ -51,7 +55,6 @@ CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
-CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_SPI=y
@@ -63,4 +66,6 @@ CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_DM_VIDEO=y
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
 CONFIG_ATMEL_HLCD=y