common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option

[J-u-boot.git] / include / configs / mcx.h

diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index cd85a6c9e89e0982c8bda7d518db58a95dc85d56..0c6e1117d4fda50b38489894efaca7041980d658 100644 (file)
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -16,6 +16,10 @@
 #define CONFIG_OMAP3_MCX               /* working with mcx */
 #define CONFIG_OMAP_GPIO
 #define CONFIG_OMAP_COMMON
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define MACH_TYPE_MCX                  3656
 #define CONFIG_MACH_TYPE       MACH_TYPE_MCX
@@ -26,10 +30,7 @@
 #define CONFIG_EMIF4   /* The chip has EMIF4 controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
-#include <asm/arch/omap3.h>
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_FIT
+#include <asm/arch/omap.h>
 
 /*
  * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
@@ -73,7 +74,6 @@
  */
 #define V_NS16550_CLK                  48000000        /* 48MHz (APLL96/2) */
 
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    (-4)
 #define CONFIG_SYS_NS16550_CLK         V_NS16550_CLK
@@ -101,27 +101,17 @@
 #define CONFIG_OMAP3_GPIO_5
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_OMAP
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       57
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define        CONFIG_USB_HOST_ETHER
+#define        CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_MCS7830
 
 /* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_EXT2                /* EXT2 Support                 */
-#define CONFIG_CMD_FAT         /* FAT support                  */
 #define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
 
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C         /* I2C serial bus support       */
-#define CONFIG_CMD_MMC         /* MMC support                  */
-#define CONFIG_CMD_FAT         /* FAT support                  */
-#define CONFIG_CMD_USB
 #define CONFIG_CMD_NAND                /* NAND support                 */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_RBTREE
@@ -129,12 +119,6 @@
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_GPIO
-
-#undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
-#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
-#undef CONFIG_CMD_IMI          /* iminfo                       */
-#undef CONFIG_CMD_IMLS         /* List all found images        */
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
@@ -146,9 +130,6 @@
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_I2C_RTC_ADDR                0x68
 
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 /*
  * Board NAND Info.
  */
@@ -168,13 +149,9 @@
 #define CONFIG_JFFS2_PART_SIZE         0xf980000       /* sz of jffs2 part */
 
 /* Environment information */
-#define CONFIG_BOOTDELAY       3
 
 #define CONFIG_BOOTFILE                "uImage"
 
-#define xstr(s)        str(s)
-#define str(s) #s
-
 /* Setup MTD for NAND on the SOM */
 #define MTDIDS_DEFAULT         "nand0=omap2-nand.0"
 #define MTDPARTS_DEFAULT       "mtdparts=omap2-nand.0:512k(MLO),"      \
@@ -201,13 +178,13 @@
        "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
        "baudrate=115200\0"                                             \
        "consoledev=ttyO2\0"                                            \
-       "hostname=" xstr(CONFIG_HOSTNAME) "\0"                          \
+       "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
        "loadaddr=0x82000000\0"                                         \
        "load=tftp ${loadaddr} ${u-boot}\0"                             \
        "load_k=tftp ${loadaddr} ${bootfile}\0"                         \
        "loaduimage=fatload mmc 0 ${loadaddr} uImage\0"                 \
        "loadmlo=tftp ${loadaddr} ${mlo}\0"                             \
-       "mlo=" xstr(CONFIG_HOSTNAME) "/MLO\0"                           \
+       "mlo=" __stringify(CONFIG_HOSTNAME) "/MLO\0"                    \
        "mmcargs=root=/dev/mmcblk0p2 rw "                               \
                "rootfstype=ext3 rootwait\0"                            \
        "mmcboot=echo Booting from mmc ...; "                           \
@@ -221,7 +198,7 @@
                "bootm ${loadaddr}\0"                                   \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
                "nfsroot=${serverip}:${rootpath}\0"                     \
-       "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.img\0"                 \
+       "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.img\0"          \
        "uboot_addr=0x80000\0"                                          \
        "update=nandecc sw;nand erase ${uboot_addr} 100000;"            \
                "nand write ${loadaddr} ${uboot_addr} 80000\0"          \
@@ -273,11 +250,7 @@
 /*
  * Miscellaneous configurable options
  */
-#define V_PROMPT                       "mcx # "
-
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT              V_PROMPT
 #define CONFIG_SYS_CBSIZE              1024/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -315,7 +288,10 @@
  */
 
 /* **** PISMO SUPPORT *** */
+#define CONFIG_NAND
+#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_GPMC_PREFETCH
 #define CONFIG_ENV_IS_IN_NAND
 #define SMNAND_ENV_OFFSET              0x180000 /* environment starts here */
 
@@ -372,8 +348,8 @@
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION   1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_PAGE_COUNT     64