Merge patch series "clk: mediatek: mt7623: clk migration for OF_UPSTREAM"

[J-u-boot.git] / configs / phycore-imx8mp_defconfig

diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index 519e0cfb3d4c8c2e119108dfa8d714f70e7ac510..63f8a80ba9942cfcf8c0197be06dd0abbefaad0c 100644 (file)
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -5,37 +5,37 @@ CONFIG_SYS_MALLOC_LEN=0x2000000
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_PHYTEC_SOM_DETECTION=y
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x3C0000
 CONFIG_SYS_I2C_MXC_I2C1=y
 CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="imx8mp-phyboard-pollux-rdk"
+CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-phyboard-pollux-rdk"
 CONFIG_SPL_TEXT_BASE=0x920000
 CONFIG_TARGET_PHYCORE_IMX8MP=y
-CONFIG_PHYTEC_SOM_DETECTION=y
+CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK=0x960000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x98fc00
+CONFIG_SPL_BSS_MAX_SIZE=0x400
 CONFIG_SPL=y
+CONFIG_ENV_OFFSET_REDUND=0x3e0000
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
 CONFIG_SYS_LOAD_ADDR=0x40480000
-CONFIG_LTO=y
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
 CONFIG_DEFAULT_FDT_FILE="oftree"
 CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_MAX_SIZE=0x26000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x98fc00
-CONFIG_SPL_BSS_MAX_SIZE=0x400
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
@@ -46,14 +46,13 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+# CONFIG_SPL_CRYPTO is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="u-boot=> "
-CONFIG_SYS_MAXARGS=64
-# CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_ERASEENV=y
 # CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
@@ -65,6 +64,9 @@ CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -74,10 +76,12 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_DEV=2
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
@@ -85,11 +89,22 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_IMX8MP=y
+CONFIG_FSL_CAAM=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x42800000
+CONFIG_FASTBOOT_BUF_SIZE=0x13000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_UUU_SUPPORT=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=2
+CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
+CONFIG_FASTBOOT_MMC_BOOT1_NAME="mmc2boot0"
+CONFIG_FASTBOOT_MMC_BOOT2_NAME="mmc2boot1"
+CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
+CONFIG_FASTBOOT_MMC_USER_NAME="mmc2"
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
 # CONFIG_SPL_DM_I2C is not set
 CONFIG_SPL_SYS_I2C_LEGACY=y
-CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x51
 CONFIG_SUPPORT_EMMC_BOOT=y
@@ -104,10 +119,14 @@ CONFIG_DM_ETH_PHY=y
 CONFIG_FEC_MXC=y
 CONFIG_RGMII=y
 CONFIG_MII=y
+CONFIG_PHY_IMX8MQ_USB=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
 CONFIG_SPL_POWER_LEGACY=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8M_POWER_DOMAIN=y
+CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y
 CONFIG_POWER_PCA9450=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
@@ -120,4 +139,19 @@ CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
+CONFIG_IMX_TMU=y
+CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="PHYTEC"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_IMX_WATCHDOG=y
+# CONFIG_SPL_SHA_HW_ACCEL is not set