Convert CONFIG_SPL_BSS_START_ADDR to Kconfig

[J-u-boot.git] / include / configs / verdin-imx8mm.h

diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index 17583c0a6af623f3335bfc05d41591e5f8690616..4fc7617c776aa9bd90bde1bee5ce0db6037c7205 100644 (file)
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -9,7 +9,6 @@
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
 
-#define CONFIG_SPL_MAX_SIZE            (148 * 1024)
 #define CONFIG_SYS_MONITOR_LEN         SZ_512K
 #define CONFIG_SYS_UBOOT_BASE  \
        (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
@@ -17,9 +16,6 @@
 #define CONFIG_SYS_BOOTM_LEN           SZ_64M
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK               0x920000
-#define CONFIG_SPL_BSS_START_ADDR      0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE                SZ_8K   /* 8 KB */
 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     SZ_512K /* 512 KB */
 
@@ -42,7 +38,6 @@
        func(MMC, mmc, 0) \
        func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
-#undef CONFIG_ISO_PARTITION
 #else
 #define BOOTENV
 #endif
@@ -53,17 +48,12 @@
        MEM_LAYOUT_ENV_SETTINGS \
        "bootcmd_mfg=fastboot 0\0" \
        "boot_file=Image\0" \
+       "boot_script_dhcp=boot.scr\0" \
        "console=ttymxc0\0" \
        "fdt_addr=0x43000000\0" \
        "fdt_board=dev\0" \
        "initrd_addr=0x43800000\0" \
        "initrd_high=0xffffffffffffffff\0" \
-       "netargs=setenv bootargs console=${console},${baudrate} " \
-               "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
-               "\0" \
-       "nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
-               "tftp ${fdt_addr} verdin/${fdtfile}; " \
-               "booti ${loadaddr} - ${fdt_addr}\0" \
        "setup=setenv setupargs console=${console},${baudrate} " \
                "console=tty1 consoleblank=0 earlycon\0" \
        "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
@@ -74,10 +64,6 @@
 
 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE        SZ_2M
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
@@ -90,24 +76,10 @@
 #define PHYS_SDRAM_SIZE                        SZ_2G /* 2GB DDR */
 
 /* UART */
-#define CONFIG_MXC_UART_BASE           UART1_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE              SZ_2K
-#define CONFIG_SYS_MAXARGS             64
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-/* USDHC */
-#define CONFIG_SYS_FSL_USDHC_NUM       2
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
+#define CONFIG_MXC_UART_BASE           UART_BASE_ADDR(1)
 
 /* ENET */
-#define CONFIG_ETHPRIME                 "FEC"
-#define CONFIG_FEC_XCV_TYPE             RGMII
 #define CONFIG_FEC_MXC_PHYADDR          7
-#define FEC_QUIRK_ENET_MAC
-#define IMX_FEC_BASE                   0x30BE0000
 
 /* USB Configs */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET