usb: dwc3: fix Kconfig dependency to accept host driver in drivers/usb/dwc3

[J-u-boot.git] / Kconfig

diff --git a/Kconfig b/Kconfig
index 39a4d938d864734b5bc2ad2212937b8da5709e53..c48f00ea369595a18bb2c5d955a2a9ad5abc7adf 100644 (file)
--- a/Kconfig
+++ b/Kconfig
@@ -57,6 +57,7 @@ config DISTRO_DEFAULTS
        bool "Select defaults suitable for booting general purpose Linux distributions"
        default y if ARCH_SUNXI || TEGRA
        default y if ARCH_LS2080A
+       default y if ARCH_MESON
        default y if ARCH_ROCKCHIP
        default n
        select CMD_BOOTZ if ARM && !ARM64
@@ -69,6 +70,7 @@ config DISTRO_DEFAULTS
        select CMD_FS_GENERIC
        select CMD_MII
        select CMD_PING
+       select CMD_PART
        select HUSH_PARSER
        help
          Select this to enable various options and commands which are suitable
@@ -93,6 +95,26 @@ config SYS_MALLOC_F_LEN
          particular needs this to operate, so that it can allocate the
          initial serial device and any others that are needed.
 
+config SPL_SYS_MALLOC_F_LEN
+        hex "Size of malloc() pool in SPL before relocation"
+        depends on SYS_MALLOC_F
+        default SYS_MALLOC_F_LEN
+        help
+          Before relocation, memory is very limited on many platforms. Still,
+          we can provide a small malloc() pool if needed. Driver model in
+          particular needs this to operate, so that it can allocate the
+          initial serial device and any others that are needed.
+
+config TPL_SYS_MALLOC_F_LEN
+        hex "Size of malloc() pool in TPL before relocation"
+        depends on SYS_MALLOC_F
+        default SYS_MALLOC_F_LEN
+        help
+          Before relocation, memory is very limited on many platforms. Still,
+          we can provide a small malloc() pool if needed. Driver model in
+          particular needs this to operate, so that it can allocate the
+          initial serial device and any others that are needed.
+
 menuconfig EXPERT
        bool "Configure standard U-Boot features (expert users)"
        default y
@@ -142,6 +164,8 @@ menu "Boot images"
 
 config FIT
        bool "Support Flattened Image Tree"
+       select MD5
+       select SHA1
        help
          This option allows you to boot the new uImage structure,
          Flattened Image Tree.  FIT is formally a FDT, which can include
@@ -154,6 +178,20 @@ config FIT
 
 if FIT
 
+config FIT_ENABLE_SHA256_SUPPORT
+       bool "Support SHA256 checksum of FIT image contents"
+       select SHA256
+       default y
+       help
+         Enable this to support SHA256 checksum of FIT image contents. A
+         SHA256 checksum is a 256-bit (32-byte) hash value used to check that
+         the image contents have not been corrupted. SHA256 is recommended
+         for use in secure applications since (as at 2016) there is no known
+         feasible attack that could produce a 'collision' with differing
+         input data. Use this for the highest security. Note that only the
+         SHA256 variant is supported: SHA512 and others are not currently
+         supported in U-Boot.
+
 config FIT_SIGNATURE
        bool "Enable signature verification of FIT uImages"
        depends on DM
@@ -202,18 +240,22 @@ config FIT_IMAGE_POST_PROCESS
          injected into the FIT creation (i.e. the blobs would have been pre-
          processed before being added to the FIT image).
 
+if SPL
+
 config SPL_FIT
        bool "Support Flattened Image Tree within SPL"
        depends on SPL
+       select SPL_OF_LIBFDT
 
 config SPL_FIT_SIGNATURE
        bool "Enable signature verification of FIT firmware within SPL"
-       depends on SPL_FIT
        depends on SPL_DM
+       select SPL_FIT
        select SPL_RSA
 
 config SPL_LOAD_FIT
        bool "Enable SPL loading U-Boot as a FIT"
+       select SPL_FIT
        help
          Normally with the SPL framework a legacy image is generated as part
          of the build. This contains U-Boot along with information as to
@@ -236,6 +278,26 @@ config SPL_FIT_IMAGE_POST_PROCESS
          injected into the FIT creation (i.e. the blobs would have been pre-
          processed before being added to the FIT image).
 
+config SPL_FIT_SOURCE
+       string ".its source file for U-Boot FIT image"
+       depends on SPL_FIT
+       help
+         Specifies a (platform specific) FIT source file to generate the
+         U-Boot FIT image. This could specify further image to load and/or
+         execute.
+
+config SPL_FIT_GENERATOR
+       string ".its file generator script for U-Boot FIT image"
+       depends on SPL_FIT
+       default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
+       help
+         Specifies a (platform specific) script file to generate the FIT
+         source file used to build the U-Boot FIT image file. This gets
+         passed a list of supported device tree file stub names to
+         include in the generated image.
+
+endif # SPL
+
 endif # FIT
 
 config OF_BOARD_SETUP
@@ -281,14 +343,16 @@ config SYS_EXTRA_OPTIONS
          new boards should not use this option.
 
 config SYS_TEXT_BASE
-       depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
+       depends on ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
                (M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE || MIPS || \
-               ARCH_ZYNQ
+               ARCH_ZYNQ || ARCH_KEYSTONE || ARCH_OMAP2PLUS
        depends on !EFI_APP
        hex "Text Base"
        help
          TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture
 
+       default 0x80800000 if ARCH_OMAP2PLUS
+
 
 config SYS_CLK_FREQ
        depends on ARC || ARCH_SUNXI
@@ -306,12 +370,18 @@ config ARCH_FIXUP_FDT_MEMORY
 
 endmenu                # Boot images
 
+source "api/Kconfig"
+
 source "common/Kconfig"
 
 source "cmd/Kconfig"
 
+source "disk/Kconfig"
+
 source "dts/Kconfig"
 
+source "env/Kconfig"
+
 source "net/Kconfig"
 
 source "drivers/Kconfig"
@@ -321,3 +391,5 @@ source "fs/Kconfig"
 source "lib/Kconfig"
 
 source "test/Kconfig"
+
+source "scripts/Kconfig"