microblaze: Enable cache by default

[J-u-boot.git] / include / spl.h

diff --git a/include/spl.h b/include/spl.h
index b42683c9e71a99bcb41fe53a5198f98d59989011..e4640f3830b04a7adfbcdd259b1aac047eb7bde4 100644 (file)
--- a/include/spl.h
+++ b/include/spl.h
@@ -11,6 +11,7 @@
 /* Platform-specific defines */
 #include <linux/compiler.h>
 #include <asm/spl.h>
+#include <handoff.h>
 
 /* Value in r0 indicates we booted from U-Boot */
 #define UBOOT_NOT_LOADED_FROM_SPL      0x13578642
@@ -21,18 +22,63 @@
 #define MMCSD_MODE_FS          2
 #define MMCSD_MODE_EMMCBOOT    3
 
+/*
+ * u_boot_first_phase() - check if this is the first U-Boot phase
+ *
+ * U-Boot has up to three phases: TPL, SPL and U-Boot proper. Depending on the
+ * build flags we can determine whether the current build is for the first
+ * phase of U-Boot or not. If there is no SPL, then this is U-Boot proper. If
+ * there is SPL but no TPL, the the first phase is SPL. If there is TPL, then
+ * it is the first phase.
+ *
+ * @returns true if this is the first phase of U-Boot
+ *
+ */
+static inline bool u_boot_first_phase(void)
+{
+       if (IS_ENABLED(CONFIG_TPL)) {
+               if (IS_ENABLED(CONFIG_TPL_BUILD))
+                       return true;
+       } else if (IS_ENABLED(CONFIG_SPL)) {
+               if (IS_ENABLED(CONFIG_SPL_BUILD))
+                       return true;
+       } else {
+               return true;
+       }
+
+       return false;
+}
+
+/* A string name for SPL or TPL */
+#ifdef CONFIG_SPL_BUILD
+# ifdef CONFIG_TPL_BUILD
+#  define SPL_TPL_NAME "TPL"
+# else
+#  define SPL_TPL_NAME "SPL"
+# endif
+# define SPL_TPL_PROMPT        SPL_TPL_NAME ": "
+#else
+# define SPL_TPL_NAME  ""
+# define SPL_TPL_PROMPT        ""
+#endif
+
 struct spl_image_info {
        const char *name;
        u8 os;
        uintptr_t load_addr;
        uintptr_t entry_point;
-#if CONFIG_IS_ENABLED(LOAD_FIT)
+#if CONFIG_IS_ENABLED(LOAD_FIT) || CONFIG_IS_ENABLED(LOAD_FIT_FULL)
        void *fdt_addr;
 #endif
        u32 boot_device;
        u32 size;
        u32 flags;
        void *arg;
+#ifdef CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK
+       ulong dcrc_data;
+       ulong dcrc_length;
+       ulong dcrc;
+#endif
 };
 
 /*
@@ -62,6 +108,15 @@ struct spl_load_info {
  */
 binman_sym_extern(ulong, u_boot_any, image_pos);
 
+/**
+ * spl_load_simple_fit_skip_processing() - Hook to allow skipping the FIT
+ *     image processing during spl_load_simple_fit().
+ *
+ * Return true to skip FIT processing, false to preserve the full code flow
+ * of spl_load_simple_fit().
+ */
+bool spl_load_simple_fit_skip_processing(void);
+
 /**
  * spl_load_simple_fit() - Loads a fit image from a device.
  * @spl_image: Image description to set up
@@ -77,6 +132,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
                        struct spl_load_info *info, ulong sector, void *fdt);
 
 #define SPL_COPY_PAYLOAD_ONLY  1
+#define SPL_FIT_FOUND          2
 
 /* SPL common functions */
 void preloader_console_init(void);
@@ -283,11 +339,46 @@ int spl_dfu_cmd(int usbctrl, char *dfu_alt_info, char *interface, char *devstr);
 int spl_mmc_load_image(struct spl_image_info *spl_image,
                       struct spl_boot_device *bootdev);
 
+/**
+ * spl_mmc_load() - Load an image file from MMC/SD media
+ *
+ * @param spl_image    Image data filled in by loading process
+ * @param bootdev      Describes which device to load from
+ * @param filename     Name of file to load (in FS mode)
+ * @param raw_part     Partition to load from (in RAW mode)
+ * @param raw_sect     Sector to load from (in RAW mode)
+ *
+ * @return 0 on success, otherwise error code
+ */
+int spl_mmc_load(struct spl_image_info *spl_image,
+                struct spl_boot_device *bootdev,
+                const char *filename,
+                int raw_part,
+                unsigned long raw_sect);
+
 /**
  * spl_invoke_atf - boot using an ARM trusted firmware image
  */
 void spl_invoke_atf(struct spl_image_info *spl_image);
 
+/**
+ * spl_optee_entry - entry function for optee
+ *
+ * args defind in op-tee project
+ * https://github.com/OP-TEE/optee_os/
+ * core/arch/arm/kernel/generic_entry_a32.S
+ * @arg0: pagestore
+ * @arg1: (ARMv7 standard bootarg #1)
+ * @arg2: device tree address, (ARMv7 standard bootarg #2)
+ * @arg3: non-secure entry address (ARMv7 bootarg #0)
+ */
+void spl_optee_entry(void *arg0, void *arg1, void *arg2, void *arg3);
+
+/**
+ * spl_invoke_opensbi - boot using a RISC-V OpenSBI image
+ */
+void spl_invoke_opensbi(struct spl_image_info *spl_image);
+
 /**
  * board_return_to_bootrom - allow for boards to continue with the boot ROM
  *
@@ -298,6 +389,18 @@ void spl_invoke_atf(struct spl_image_info *spl_image);
  */
 void board_return_to_bootrom(void);
 
+/**
+ * board_spl_fit_post_load - allow process images after loading finished
+ *
+ */
+void board_spl_fit_post_load(ulong load_addr, size_t length);
+
+/**
+ * board_spl_fit_size_align - specific size align before processing payload
+ *
+ */
+ulong board_spl_fit_size_align(ulong size);
+
 /**
  * spl_perform_fixups() - arch/board-specific callback before processing
  *                        the boot-payload