Convert CONFIG_SYS_I2C_SPEED et al to Kconfig

[J-u-boot.git] / configs / A20-OLinuXino-Lime2_defconfig

diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index 134d1d3fef69add316087f88976d5a0b00e04209..903e3fdbcc875c0936ebeea7ccc73f28cec81598 100644 (file)
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
 CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
@@ -8,24 +9,28 @@ CONFIG_USB0_VBUS_PIN="PC17"
 CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
-CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
-# CONFIG_CMD_FLASH is not set
 CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_SCSI_AHCI=y
 CONFIG_DFU_RAM=y
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SYS_I2C_SLAVE=0x7f
+CONFIG_SYS_I2C_SPEED=400000
+CONFIG_PHY_REALTEK=y
+CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y
+CONFIG_MII=y
 CONFIG_SUN7I_GMAC=y
 CONFIG_AXP_ALDO3_VOLT=2800
+CONFIG_AXP_ALDO3_VOLT_SLOPE_08=y
+CONFIG_AXP_ALDO3_INRUSH_QUIRK=y
 CONFIG_AXP_ALDO4_VOLT=2800
 CONFIG_SCSI=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y