| | 1 | /* |
| | 2 | * (C) Copyright 2012 Michal Simek <[email protected]> |
| | 3 | * (C) Copyright 2013 Xilinx, Inc. |
| | 4 | * |
| | 5 | * Common configuration options for all Zynq boards. |
| | 6 | * |
| | 7 | * SPDX-License-Identifier: GPL-2.0+ |
| | 8 | */ |
| | 9 | |
| | 10 | #ifndef __CONFIG_ZYNQ_COMMON_H |
| | 11 | #define __CONFIG_ZYNQ_COMMON_H |
| | 12 | |
| | 13 | /* High Level configuration Options */ |
| | 14 | #define CONFIG_ARMV7 |
| | 15 | #define CONFIG_ZYNQ |
| | 16 | |
| | 17 | /* CPU clock */ |
| | 18 | #ifndef CONFIG_CPU_FREQ_HZ |
| | 19 | # define CONFIG_CPU_FREQ_HZ 800000000 |
| | 20 | #endif |
| | 21 | |
| | 22 | /* Cache options */ |
| | 23 | #define CONFIG_CMD_CACHE |
| | 24 | #define CONFIG_SYS_CACHELINE_SIZE 32 |
| | 25 | |
| | 26 | #define CONFIG_SYS_L2CACHE_OFF |
| | 27 | #ifndef CONFIG_SYS_L2CACHE_OFF |
| | 28 | # define CONFIG_SYS_L2_PL310 |
| | 29 | # define CONFIG_SYS_PL310_BASE 0xf8f02000 |
| | 30 | #endif |
| | 31 | |
| | 32 | /* Serial drivers */ |
| | 33 | #define CONFIG_BAUDRATE 115200 |
| | 34 | /* The following table includes the supported baudrates */ |
| | 35 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
| | 36 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} |
| | 37 | |
| | 38 | /* Zynq Serial driver */ |
| | 39 | #ifdef CONFIG_ZYNQ_SERIAL_UART0 |
| | 40 | # define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000 |
| | 41 | # define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE |
| | 42 | # define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000 |
| | 43 | #endif |
| | 44 | |
| | 45 | #ifdef CONFIG_ZYNQ_SERIAL_UART1 |
| | 46 | # define CONFIG_ZYNQ_SERIAL_BASEADDR1 0xE0001000 |
| | 47 | # define CONFIG_ZYNQ_SERIAL_BAUDRATE1 CONFIG_BAUDRATE |
| | 48 | # define CONFIG_ZYNQ_SERIAL_CLOCK1 50000000 |
| | 49 | #endif |
| | 50 | |
| | 51 | #if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1) |
| | 52 | # define CONFIG_ZYNQ_SERIAL |
| | 53 | #endif |
| | 54 | |
| | 55 | /* DCC driver */ |
| | 56 | #if defined(CONFIG_ZYNQ_DCC) |
| | 57 | # define CONFIG_ARM_DCC |
| | 58 | # define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ |
| | 59 | #endif |
| | 60 | |
| | 61 | /* Ethernet driver */ |
| | 62 | #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) |
| | 63 | # define CONFIG_NET_MULTI |
| | 64 | # define CONFIG_ZYNQ_GEM |
| | 65 | # define CONFIG_MII |
| | 66 | # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN |
| | 67 | # define CONFIG_PHYLIB |
| | 68 | # define CONFIG_PHY_MARVELL |
| | 69 | #endif |
| | 70 | |
| | 71 | /* SPI */ |
| | 72 | #ifdef CONFIG_ZYNQ_SPI |
| | 73 | # define CONFIG_SPI_FLASH |
| | 74 | # define CONFIG_SPI_FLASH_SST |
| | 75 | # define CONFIG_CMD_SF |
| | 76 | #endif |
| | 77 | |
| | 78 | /* NOR */ |
| | 79 | #ifndef CONFIG_SYS_NO_FLASH |
| | 80 | # define CONFIG_SYS_FLASH_BASE 0xE2000000 |
| | 81 | # define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024) |
| | 82 | # define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| | 83 | # define CONFIG_SYS_MAX_FLASH_SECT 512 |
| | 84 | # define CONFIG_SYS_FLASH_ERASE_TOUT 1000 |
| | 85 | # define CONFIG_SYS_FLASH_WRITE_TOUT 5000 |
| | 86 | # define CONFIG_FLASH_SHOW_PROGRESS 10 |
| | 87 | # define CONFIG_SYS_FLASH_CFI |
| | 88 | # undef CONFIG_SYS_FLASH_EMPTY_INFO |
| | 89 | # define CONFIG_FLASH_CFI_DRIVER |
| | 90 | # undef CONFIG_SYS_FLASH_PROTECTION |
| | 91 | # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE |
| | 92 | #endif |
| | 93 | |
| | 94 | /* MMC */ |
| | 95 | #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) |
| | 96 | # define CONFIG_MMC |
| | 97 | # define CONFIG_GENERIC_MMC |
| | 98 | # define CONFIG_SDHCI |
| | 99 | # define CONFIG_ZYNQ_SDHCI |
| | 100 | # define CONFIG_CMD_MMC |
| | 101 | # define CONFIG_CMD_FAT |
| | 102 | # define CONFIG_SUPPORT_VFAT |
| | 103 | # define CONFIG_CMD_EXT2 |
| | 104 | # define CONFIG_DOS_PARTITION |
| | 105 | #endif |
| | 106 | |
| | 107 | /* I2C */ |
| | 108 | #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1) |
| | 109 | # define CONFIG_CMD_I2C |
| | 110 | # define CONFIG_SYS_I2C |
| | 111 | # define CONFIG_SYS_I2C_ZYNQ |
| | 112 | # define CONFIG_SYS_I2C_ZYNQ_SPEED 100000 |
| | 113 | # define CONFIG_SYS_I2C_ZYNQ_SLAVE 1 |
| | 114 | #endif |
| | 115 | |
| | 116 | /* EEPROM */ |
| | 117 | #ifdef CONFIG_ZYNQ_EEPROM |
| | 118 | # define CONFIG_CMD_EEPROM |
| | 119 | # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| | 120 | # define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 |
| | 121 | # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 |
| | 122 | # define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 |
| | 123 | # define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */ |
| | 124 | #endif |
| | 125 | |
| | 126 | #define CONFIG_BOOTP_SERVERIP |
| | 127 | #define CONFIG_BOOTP_BOOTPATH |
| | 128 | #define CONFIG_BOOTP_GATEWAY |
| | 129 | #define CONFIG_BOOTP_HOSTNAME |
| | 130 | #define CONFIG_BOOTP_MAY_FAIL |
| | 131 | |
| | 132 | /* Total Size of Environment Sector */ |
| | 133 | #define CONFIG_ENV_SIZE (128 << 10) |
| | 134 | |
| | 135 | /* Allow to overwrite serial and ethaddr */ |
| | 136 | #define CONFIG_ENV_OVERWRITE |
| | 137 | |
| | 138 | /* Environment */ |
| | 139 | #ifndef CONFIG_ENV_IS_NOWHERE |
| | 140 | # ifndef CONFIG_SYS_NO_FLASH |
| | 141 | # define CONFIG_ENV_IS_IN_FLASH |
| | 142 | # elif defined(CONFIG_SYS_NO_FLASH) |
| | 143 | # define CONFIG_ENV_IS_NOWHERE |
| | 144 | # endif |
| | 145 | |
| | 146 | # define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE |
| | 147 | # define CONFIG_ENV_OFFSET 0xE0000 |
| | 148 | # define CONFIG_CMD_SAVEENV |
| | 149 | #endif |
| | 150 | |
| | 151 | /* Default environment */ |
| | 152 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| | 153 | "fit_image=fit.itb\0" \ |
| | 154 | "load_addr=0x2000000\0" \ |
| | 155 | "fit_size=0x800000\0" \ |
| | 156 | "flash_off=0x100000\0" \ |
| | 157 | "nor_flash_off=0xE2100000\0" \ |
| | 158 | "fdt_high=0x20000000\0" \ |
| | 159 | "initrd_high=0x20000000\0" \ |
| | 160 | "norboot=echo Copying FIT from NOR flash to RAM... && " \ |
| | 161 | "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \ |
| | 162 | "bootm ${load_addr}\0" \ |
| | 163 | "sdboot=echo Copying FIT from SD to RAM... && " \ |
| | 164 | "fatload mmc 0 ${load_addr} ${fit_image} && " \ |
| | 165 | "bootm ${load_addr}\0" \ |
| | 166 | "jtagboot=echo TFTPing FIT to RAM... && " \ |
| | 167 | "tftp ${load_addr} ${fit_image} && " \ |
| | 168 | "bootm ${load_addr}\0" |
| | 169 | #define CONFIG_BOOTCOMMAND "run $modeboot" |
| | 170 | #define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */ |
| | 171 | #define CONFIG_SYS_LOAD_ADDR 0 /* default? */ |
| | 172 | |
| | 173 | /* Miscellaneous configurable options */ |
| | 174 | #define CONFIG_SYS_PROMPT "zynq-uboot> " |
| | 175 | #define CONFIG_SYS_HUSH_PARSER |
| | 176 | |
| | 177 | #define CONFIG_CMDLINE_EDITING |
| | 178 | #define CONFIG_AUTO_COMPLETE |
| | 179 | #define CONFIG_BOARD_LATE_INIT |
| | 180 | #define CONFIG_SYS_LONGHELP |
| | 181 | #define CONFIG_SYS_MAXARGS 15 /* max number of command args */ |
| | 182 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| | 183 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ |
| | 184 | sizeof(CONFIG_SYS_PROMPT) + 16) |
| | 185 | |
| | 186 | /* Physical Memory map */ |
| | 187 | #define CONFIG_SYS_TEXT_BASE 0x4000000 |
| | 188 | |
| | 189 | #define CONFIG_NR_DRAM_BANKS 1 |
| | 190 | #define CONFIG_SYS_SDRAM_BASE 0 |
| | 191 | |
| | 192 | #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE |
| | 193 | #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) |
| | 194 | |
| | 195 | #define CONFIG_SYS_MALLOC_LEN 0x400000 |
| | 196 | #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE |
| | 197 | #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN |
| | 198 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ |
| | 199 | CONFIG_SYS_INIT_RAM_SIZE - \ |
| | 200 | GENERATED_GBL_DATA_SIZE) |
| | 201 | |
| | 202 | /* Enable the PL to be downloaded */ |
| | 203 | #define CONFIG_FPGA |
| | 204 | #define CONFIG_FPGA_XILINX |
| | 205 | #define CONFIG_FPGA_ZYNQPL |
| | 206 | #define CONFIG_CMD_FPGA |
| | 207 | |
| | 208 | /* Open Firmware flat tree */ |
| | 209 | #define CONFIG_OF_LIBFDT |
| | 210 | |
| | 211 | /* FIT support */ |
| | 212 | #define CONFIG_FIT |
| | 213 | #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ |
| | 214 | |
| | 215 | /* FDT support */ |
| | 216 | #define CONFIG_OF_CONTROL |
| | 217 | #define CONFIG_OF_SEPARATE |
| | 218 | #define CONFIG_DISPLAY_BOARDINFO_LATE |
| | 219 | |
| | 220 | /* RSA support */ |
| | 221 | #define CONFIG_FIT_SIGNATURE |
| | 222 | #define CONFIG_RSA |
| | 223 | |
| | 224 | /* Boot FreeBSD/vxWorks from an ELF image */ |
| | 225 | #if defined(CONFIG_ZYNQ_BOOT_FREEBSD) |
| | 226 | # define CONFIG_API |
| | 227 | # define CONFIG_CMD_ELF |
| | 228 | # define CONFIG_SYS_MMC_MAX_DEVICE 1 |
| | 229 | #endif |
| | 230 | |
| | 231 | /* Commands */ |
| | 232 | #include <config_cmd_default.h> |
| | 233 | |
| | 234 | #define CONFIG_CMD_PING |
| | 235 | #define CONFIG_CMD_DHCP |
| | 236 | #define CONFIG_CMD_MII |
| | 237 | |
| | 238 | #endif /* __CONFIG_ZYNQ_COMMON_H */ |
projects / J-u-boot.git / blame_incremental