| | 1 | CONFIG_ARM=y |
| | 2 | CONFIG_ARCH_MX6=y |
| | 3 | CONFIG_SYS_TEXT_BASE=0x87800000 |
| | 4 | CONFIG_SPL_GPIO_SUPPORT=y |
| | 5 | CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| | 6 | CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| | 7 | CONFIG_ENV_SIZE=0x20000 |
| | 8 | CONFIG_ENV_OFFSET=0x400000 |
| | 9 | CONFIG_TARGET_MX6UL_ENGICAM=y |
| | 10 | CONFIG_SPL_SERIAL_SUPPORT=y |
| | 11 | CONFIG_NR_DRAM_BANKS=1 |
| | 12 | CONFIG_SPL=y |
| | 13 | # CONFIG_CMD_BMODE is not set |
| | 14 | CONFIG_SPL_TEXT_BASE=0x00908000 |
| | 15 | CONFIG_FIT=y |
| | 16 | CONFIG_FIT_SIGNATURE=y |
| | 17 | CONFIG_FIT_VERBOSE=y |
| | 18 | CONFIG_LEGACY_IMAGE_FORMAT=y |
| | 19 | CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" |
| | 20 | CONFIG_BOOTDELAY=3 |
| | 21 | CONFIG_SUPPORT_RAW_INITRD=y |
| | 22 | CONFIG_BOUNCE_BUFFER=y |
| | 23 | CONFIG_SPL_DMA=y |
| | 24 | CONFIG_SPL_WATCHDOG_SUPPORT=y |
| | 25 | CONFIG_HUSH_PARSER=y |
| | 26 | CONFIG_SYS_PROMPT="geam6ul> " |
| | 27 | CONFIG_CRC32_VERIFY=y |
| | 28 | CONFIG_CMD_MEMTEST=y |
| | 29 | CONFIG_SYS_MEMTEST_START=0x80000000 |
| | 30 | CONFIG_SYS_MEMTEST_END=0x88000000 |
| | 31 | CONFIG_CMD_GPIO=y |
| | 32 | CONFIG_CMD_I2C=y |
| | 33 | CONFIG_CMD_MMC=y |
| | 34 | CONFIG_CMD_MII=y |
| | 35 | CONFIG_CMD_PING=y |
| | 36 | CONFIG_CMD_CACHE=y |
| | 37 | CONFIG_CMD_EXT4=y |
| | 38 | CONFIG_CMD_EXT4_WRITE=y |
| | 39 | CONFIG_CMD_FAT=y |
| | 40 | CONFIG_CMD_FS_GENERIC=y |
| | 41 | CONFIG_CMD_MTDPARTS=y |
| | 42 | CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" |
| | 43 | CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),8m(kernel),1m(dtb),-(rootfs)" |
| | 44 | CONFIG_CMD_UBI=y |
| | 45 | CONFIG_DEFAULT_DEVICE_TREE="imx6ul-geam" |
| | 46 | CONFIG_ENV_IS_IN_NAND=y |
| | 47 | CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| | 48 | CONFIG_SYS_I2C_MXC=y |
| | 49 | CONFIG_FSL_USDHC=y |
| | 50 | CONFIG_MTD=y |
| | 51 | CONFIG_MTD_RAW_NAND=y |
| | 52 | CONFIG_NAND_MXS=y |
| | 53 | CONFIG_PHYLIB=y |
| | 54 | CONFIG_PHY_SMSC=y |
| | 55 | CONFIG_FEC_MXC=y |
| | 56 | CONFIG_MII=y |
| | 57 | CONFIG_PINCTRL=y |
| | 58 | CONFIG_PINCTRL_IMX6=y |
| | 59 | CONFIG_MXC_UART=y |
| | 60 | CONFIG_IMX_THERMAL=y |
projects / J-u-boot.git / blame_incremental