| | 1 | CONFIG_ARM=y |
| | 2 | CONFIG_COUNTER_FREQUENCY=25000000 |
| | 3 | CONFIG_TARGET_LS1012ARDB=y |
| | 4 | CONFIG_TFABOOT=y |
| | 5 | CONFIG_TEXT_BASE=0x82000000 |
| | 6 | CONFIG_SYS_MALLOC_LEN=0x500000 |
| | 7 | CONFIG_NR_DRAM_BANKS=2 |
| | 8 | CONFIG_ENV_SIZE=0x2000 |
| | 9 | CONFIG_DM_GPIO=y |
| | 10 | CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-rdb" |
| | 11 | CONFIG_QSPI_AHB_INIT=y |
| | 12 | CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y |
| | 13 | CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y |
| | 14 | CONFIG_PCI=y |
| | 15 | CONFIG_AHCI=y |
| | 16 | CONFIG_NXP_ESBC=y |
| | 17 | CONFIG_LAYERSCAPE_NS_ACCESS=y |
| | 18 | CONFIG_PCIE1=y |
| | 19 | CONFIG_SYS_MEMTEST_START=0x80000000 |
| | 20 | CONFIG_SYS_MEMTEST_END=0x9fffffff |
| | 21 | # CONFIG_SYS_MALLOC_F is not set |
| | 22 | CONFIG_FIT_VERBOSE=y |
| | 23 | CONFIG_DISTRO_DEFAULTS=y |
| | 24 | CONFIG_BOOTDELAY=10 |
| | 25 | CONFIG_OF_BOARD_SETUP=y |
| | 26 | CONFIG_OF_STDOUT_VIA_ALIAS=y |
| | 27 | CONFIG_USE_BOOTARGS=y |
| | 28 | CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" |
| | 29 | # CONFIG_USE_BOOTCOMMAND is not set |
| | 30 | # CONFIG_DISPLAY_BOARDINFO is not set |
| | 31 | CONFIG_DISPLAY_BOARDINFO_LATE=y |
| | 32 | CONFIG_SYS_MAXARGS=64 |
| | 33 | CONFIG_SYS_PBSIZE=532 |
| | 34 | CONFIG_CMD_GREPENV=y |
| | 35 | CONFIG_CMD_MEMINFO=y |
| | 36 | CONFIG_CMD_MEMTEST=y |
| | 37 | CONFIG_CMD_GPIO=y |
| | 38 | CONFIG_CMD_GPT=y |
| | 39 | CONFIG_CMD_I2C=y |
| | 40 | CONFIG_CMD_MMC=y |
| | 41 | CONFIG_CMD_PCI=y |
| | 42 | CONFIG_CMD_USB=y |
| | 43 | CONFIG_CMD_CACHE=y |
| | 44 | CONFIG_OF_CONTROL=y |
| | 45 | CONFIG_ENV_OVERWRITE=y |
| | 46 | CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| | 47 | CONFIG_NET_RANDOM_ETHADDR=y |
| | 48 | CONFIG_SATA=y |
| | 49 | CONFIG_SATA_CEVA=y |
| | 50 | CONFIG_MPC8XXX_GPIO=y |
| | 51 | CONFIG_DM_I2C=y |
| | 52 | CONFIG_I2C_SET_DEFAULT_BUS_NUM=y |
| | 53 | CONFIG_SYS_FSL_SEC_MON_BE=y |
| | 54 | CONFIG_FSL_ESDHC=y |
| | 55 | CONFIG_MTD=y |
| | 56 | CONFIG_DM_SPI_FLASH=y |
| | 57 | # CONFIG_SPI_FLASH_BAR is not set |
| | 58 | CONFIG_SPI_FLASH_SPANSION=y |
| | 59 | # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set |
| | 60 | CONFIG_FSL_PFE=y |
| | 61 | CONFIG_E1000=y |
| | 62 | CONFIG_NVME_PCI=y |
| | 63 | CONFIG_PCIE_LAYERSCAPE_RC=y |
| | 64 | CONFIG_DM_RTC=y |
| | 65 | CONFIG_DM_SCSI=y |
| | 66 | CONFIG_SYS_NS16550_SERIAL=y |
| | 67 | CONFIG_SPI=y |
| | 68 | CONFIG_DM_SPI=y |
| | 69 | CONFIG_FSL_DSPI=y |
| | 70 | CONFIG_FSL_QSPI=y |
| | 71 | CONFIG_USB=y |
| | 72 | CONFIG_USB_XHCI_HCD=y |
| | 73 | CONFIG_USB_XHCI_DWC3=y |
| | 74 | CONFIG_RSA=y |
| | 75 | CONFIG_RSA_SOFTWARE_EXP=y |
projects / J-u-boot.git / blame_incremental