]> Git Repo - J-u-boot.git/blame_incremental - configs/r8a77980_condor_defconfig
configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT
[J-u-boot.git] / configs / r8a77980_condor_defconfig
... / ...
CommitLineData
1#include <configs/renesas_rcar3.config>
2
3CONFIG_ARM=y
4CONFIG_ARCH_RENESAS=y
5CONFIG_RCAR_GEN3=y
6CONFIG_COUNTER_FREQUENCY=16666666
7CONFIG_ARCH_CPU_INIT=y
8CONFIG_SYS_MALLOC_F_LEN=0x2000
9CONFIG_ENV_SIZE=0x40000
10CONFIG_ENV_OFFSET=0x700000
11CONFIG_ENV_SECT_SIZE=0x40000
12CONFIG_DEFAULT_DEVICE_TREE="renesas/r8a77980-condor"
13CONFIG_SPL_TEXT_BASE=0xe6318000
14CONFIG_TARGET_CONDOR=y
15CONFIG_SPL_STACK=0xe6304000
16CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
17CONFIG_SPL_BSS_START_ADDR=0xe631f000
18CONFIG_SPL_BSS_MAX_SIZE=0x1000
19CONFIG_USE_BOOTARGS=y
20CONFIG_USE_BOOTCOMMAND=y
21CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77980-condor.dtb; booti 0x48080000 - 0x48000000"
22CONFIG_DEFAULT_FDT_FILE="r8a77980-condor.dtb"
23# CONFIG_BOARD_EARLY_INIT_F is not set
24# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
25CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
26CONFIG_CMD_DFU=y
27CONFIG_CMD_MMC=y
28CONFIG_OF_DTB_PROPS_REMOVE=y
29CONFIG_OF_REMOVE_PROPS="dmas dma-names interrupt-parent interrupts interrupts-extended interrupt-names interrupt-map interrupt-map-mask iommus"
30CONFIG_ENV_IS_IN_SPI_FLASH=y
31CONFIG_SYS_RELOC_GD_ENV_ADDR=y
32CONFIG_DFU_TFTP=y
33CONFIG_DFU_RAM=y
34CONFIG_DFU_SF=y
35CONFIG_SYS_I2C_RCAR_I2C=y
36CONFIG_MISC=y
37CONFIG_I2C_EEPROM=y
38CONFIG_SYS_I2C_EEPROM_ADDR=0x50
39CONFIG_MMC_IO_VOLTAGE=y
40CONFIG_MMC_UHS_SUPPORT=y
41CONFIG_MMC_HS200_SUPPORT=y
42CONFIG_RENESAS_SDHI=y
43CONFIG_SPI_FLASH_SPANSION=y
44# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
45CONFIG_PHY_MICREL=y
46CONFIG_PHY_MICREL_KSZ90X1=y
47CONFIG_DM_ETH_PHY=y
48CONFIG_SH_ETHER=y
49CONFIG_SYSINFO=y
50CONFIG_TEE=y
51CONFIG_OPTEE=y
This page took 0.030359 seconds and 4 git commands to generate.