]>
Commit | Line | Data |
---|---|---|
1 | /* SPDX-License-Identifier: GPL-2.0+ */ | |
2 | /* | |
3 | * (C) Copyright 2009 | |
4 | * Stefano Babic DENX Software Engineering [email protected]. | |
5 | * | |
6 | * Refer doc/README.imximage for more details about how-to configure | |
7 | * and create imximage boot image | |
8 | * | |
9 | * The syntax is taken as close as possible with the kwbimage | |
10 | */ | |
11 | ||
12 | /* | |
13 | * Boot Device : one of | |
14 | * spi, sd (the board has no nand neither onenand) | |
15 | */ | |
16 | BOOT_FROM sd | |
17 | ||
18 | /* | |
19 | * Device Configuration Data (DCD) | |
20 | * | |
21 | * Each entry must have the format: | |
22 | * Addr-type Address Value | |
23 | * | |
24 | * where: | |
25 | * Addr-type register length (1,2 or 4 bytes) | |
26 | * Address absolute address of the register | |
27 | * value value to be stored in the register | |
28 | */ | |
29 | /* EIM config-CS5 init -- CPLD */ | |
30 | DATA 4 0xB8002050 0x0000D843 | |
31 | DATA 4 0xB8002054 0x22252521 | |
32 | DATA 4 0xB8002058 0x22220A00 | |
33 | ||
34 | /* DDR2 init */ | |
35 | DATA 4 0xB8001004 0x0076E83A | |
36 | DATA 4 0xB8001010 0x00000204 | |
37 | DATA 4 0xB8001000 0x92210000 | |
38 | DATA 4 0x80000f00 0x12344321 | |
39 | DATA 4 0xB8001000 0xB2210000 | |
40 | DATA 1 0x82000000 0xda | |
41 | DATA 1 0x83000000 0xda | |
42 | DATA 1 0x81000400 0xda | |
43 | DATA 1 0x80000333 0xda | |
44 | ||
45 | DATA 4 0xB8001000 0x92210000 | |
46 | DATA 1 0x80000400 0x12345678 | |
47 | ||
48 | DATA 4 0xB8001000 0xA2210000 | |
49 | DATA 4 0x80000000 0x87654321 | |
50 | DATA 4 0x80000000 0x87654321 | |
51 | ||
52 | DATA 4 0xB8001000 0xB2210000 | |
53 | DATA 1 0x80000233 0xda | |
54 | DATA 1 0x81000780 0xda | |
55 | DATA 1 0x81000400 0xda | |
56 | DATA 4 0xB8001000 0x82216080 | |
57 | DATA 4 0x43FAC454 0x00001000 | |
58 | ||
59 | DATA 4 0x53F80008 0x20034000 | |
60 | ||
61 | /* Enable the clocks */ | |
62 | DATA 4 0x53f8000c 0x1fffffff | |
63 | DATA 4 0x53f80010 0xffffffff | |
64 | DATA 4 0x53f80014 0xfdfff |