Git Repo - J-u-boot.git/blame_incremental - include/configs/imx7-cm.h

... / ...

Commit	Line	Data
	1	/* SPDX-License-Identifier: GPL-2.0+ */
	2	/*
	3	* Copyright (C) 2021 Ronetix GmbH
	4	*
	5	* Configuration settings for the Ronetix's iMX7-CM System-on-Module.
	6	*/
	7
	8	#ifndef __IMX7_CM_CONFIG_H
	9	#define __IMX7_CM_CONFIG_H
	10
	11	#include "mx7_common.h"
	12
	13	#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
	14
	15	#define CONFIG_ETHPRIME "FEC"
	16
	17	#undef CONFIG_SYS_AUTOLOAD
	18	#undef CONFIG_EXTRA_ENV_SETTINGS
	19	#undef CONFIG_BOOTCOMMAND
	20
	21	/*
	22	* Use:
	23	* boot-mode=mix
	24	* boot-mode=sd
	25	* boot-mode=net
	26	*/
	27	#define MY_CONFIG_BOOT_MODE "boot-mode=sd\0"
	28
	29	#define CONFIG_EXTRA_ENV_SETTINGS \
	30	MY_CONFIG_BOOT_MODE \
	31	"image=zImage\0" \
	32	"console=ttymxc0\0" \
	33	"fdt_file=imx7-cm.dtb\0" \
	34	"fdt_addr=0x83000000\0" \
	35	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	36	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	37	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	38	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	39	"root=${mmcroot}\0" \
	40	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	41	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	42	\
	43	"bootsd=" \
	44	"echo Booting from SD card ...; " \
	45	"run mmcargs; " \
	46	"mmc dev ${mmcdev};" \
	47	"run loadimage; " \
	48	"run loadfdt; " \
	49	"bootz ${loadaddr} - ${fdt_addr}; " \
	50	"\0" \
	51	\
	52	"bootmix=" \
	53	"echo Boot Kernel and FDT from TFTP, RootFs from SD card ...; " \
	54	"run mmcargs; " \
	55	"mmc dev ${mmcdev};" \
	56	"tftp ${fdt_addr} ${fdt_file}; " \
	57	"tftp ${image}; " \
	58	"bootz ${loadaddr} - ${fdt_addr}; " \
	59	"\0" \
	60	\
	61	"netargs=setenv bootargs console=${console},${baudrate} " \
	62	"root=/dev/nfs " \
	63	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
	64	"\0" \
	65	"bootnet=" \
	66	"echo Booting from net ...; " \
	67	"run netargs; " \
	68	"tftp ${image}; " \
	69	"tftp ${fdt_addr} ${fdt_file}; " \
	70	"bootz ${loadaddr} - ${fdt_addr}; " \
	71	"\0"
	72
	73	#define CONFIG_BOOTCOMMAND "run boot${boot-mode}"
	74
	75	#define CONFIG_SYS_HZ 1000
	76
	77	/* Physical Memory Map */
	78	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	79
	80	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	81	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	82	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	83
	84	#define CONFIG_SYS_INIT_SP_OFFSET \
	85	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	86	#define CONFIG_SYS_INIT_SP_ADDR \
	87	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	88
	89	/* MMC Config*/
	90	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
	91	#define CONFIG_SYS_FSL_USDHC_NUM 2
	92
	93	#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
	94	#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
	95	#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
	96	#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
	97
	98	/* USB Configs */
	99	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	100
	101	#define CONFIG_USBD_HS
	102
	103	/* SPL */
	104	#include "imx7_spl.h"
	105
	106	#endif /* __CONFIG_H */