| | 1 | /* |
| | 2 | * Configuation settings for the Freescale MCF54455 EVB board. |
| | 3 | * |
| | 4 | * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. |
| | 5 | * TsiChung Liew ([email protected]) |
| | 6 | * |
| | 7 | * See file CREDITS for list of people who contributed to this |
| | 8 | * project. |
| | 9 | * |
| | 10 | * This program is free software; you can redistribute it and/or |
| | 11 | * modify it under the terms of the GNU General Public License as |
| | 12 | * published by the Free Software Foundation; either version 2 of |
| | 13 | * the License, or (at your option) any later version. |
| | 14 | * |
| | 15 | * This program is distributed in the hope that it will be useful, |
| | 16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| | 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| | 18 | * GNU General Public License for more details. |
| | 19 | * |
| | 20 | * You should have received a copy of the GNU General Public License |
| | 21 | * along with this program; if not, write to the Free Software |
| | 22 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| | 23 | * MA 02111-1307 USA |
| | 24 | */ |
| | 25 | |
| | 26 | /* |
| | 27 | * board/config.h - configuration options, board specific |
| | 28 | */ |
| | 29 | |
| | 30 | #ifndef _M54455EVB_H |
| | 31 | #define _M54455EVB_H |
| | 32 | |
| | 33 | /* |
| | 34 | * High Level Configuration Options |
| | 35 | * (easy to change) |
| | 36 | */ |
| | 37 | #define CONFIG_MCF5445x /* define processor family */ |
| | 38 | #define CONFIG_M54455 /* define processor type */ |
| | 39 | #define CONFIG_M54455EVB /* M54455EVB board */ |
| | 40 | |
| | 41 | #define CONFIG_MCFUART |
| | 42 | #define CONFIG_SYS_UART_PORT (0) |
| | 43 | #define CONFIG_BAUDRATE 115200 |
| | 44 | #define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } |
| | 45 | |
| | 46 | #undef CONFIG_WATCHDOG |
| | 47 | |
| | 48 | #define CONFIG_TIMESTAMP /* Print image info with timestamp */ |
| | 49 | |
| | 50 | /* |
| | 51 | * BOOTP options |
| | 52 | */ |
| | 53 | #define CONFIG_BOOTP_BOOTFILESIZE |
| | 54 | #define CONFIG_BOOTP_BOOTPATH |
| | 55 | #define CONFIG_BOOTP_GATEWAY |
| | 56 | #define CONFIG_BOOTP_HOSTNAME |
| | 57 | |
| | 58 | /* Command line configuration */ |
| | 59 | #include <config_cmd_default.h> |
| | 60 | |
| | 61 | #define CONFIG_CMD_BOOTD |
| | 62 | #define CONFIG_CMD_CACHE |
| | 63 | #define CONFIG_CMD_DATE |
| | 64 | #define CONFIG_CMD_DHCP |
| | 65 | #define CONFIG_CMD_ELF |
| | 66 | #define CONFIG_CMD_EXT2 |
| | 67 | #define CONFIG_CMD_FAT |
| | 68 | #define CONFIG_CMD_FLASH |
| | 69 | #define CONFIG_CMD_I2C |
| | 70 | #define CONFIG_CMD_IDE |
| | 71 | #define CONFIG_CMD_JFFS2 |
| | 72 | #define CONFIG_CMD_MEMORY |
| | 73 | #define CONFIG_CMD_MISC |
| | 74 | #define CONFIG_CMD_MII |
| | 75 | #define CONFIG_CMD_NET |
| | 76 | #undef CONFIG_CMD_PCI |
| | 77 | #define CONFIG_CMD_PING |
| | 78 | #define CONFIG_CMD_REGINFO |
| | 79 | #define CONFIG_CMD_SPI |
| | 80 | #define CONFIG_CMD_SF |
| | 81 | |
| | 82 | #undef CONFIG_CMD_LOADB |
| | 83 | #undef CONFIG_CMD_LOADS |
| | 84 | |
| | 85 | /* Network configuration */ |
| | 86 | #define CONFIG_MCFFEC |
| | 87 | #ifdef CONFIG_MCFFEC |
| | 88 | # define CONFIG_NET_MULTI 1 |
| | 89 | # define CONFIG_MII 1 |
| | 90 | # define CONFIG_MII_INIT 1 |
| | 91 | # define CONFIG_SYS_DISCOVER_PHY |
| | 92 | # define CONFIG_SYS_RX_ETH_BUFFER 8 |
| | 93 | # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN |
| | 94 | |
| | 95 | # define CONFIG_SYS_FEC0_PINMUX 0 |
| | 96 | # define CONFIG_SYS_FEC1_PINMUX 0 |
| | 97 | # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE |
| | 98 | # define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE |
| | 99 | # define MCFFEC_TOUT_LOOP 50000 |
| | 100 | # define CONFIG_HAS_ETH1 |
| | 101 | |
| | 102 | # define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ |
| | 103 | # define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" |
| | 104 | # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 |
| | 105 | # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 |
| | 106 | # define CONFIG_ETHPRIME "FEC0" |
| | 107 | # define CONFIG_IPADDR 192.162.1.2 |
| | 108 | # define CONFIG_NETMASK 255.255.255.0 |
| | 109 | # define CONFIG_SERVERIP 192.162.1.1 |
| | 110 | # define CONFIG_GATEWAYIP 192.162.1.1 |
| | 111 | # define CONFIG_OVERWRITE_ETHADDR_ONCE |
| | 112 | |
| | 113 | /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ |
| | 114 | # ifndef CONFIG_SYS_DISCOVER_PHY |
| | 115 | # define FECDUPLEX FULL |
| | 116 | # define FECSPEED _100BASET |
| | 117 | # else |
| | 118 | # ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN |
| | 119 | # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN |
| | 120 | # endif |
| | 121 | # endif /* CONFIG_SYS_DISCOVER_PHY */ |
| | 122 | #endif |
| | 123 | |
| | 124 | #define CONFIG_HOSTNAME M54455EVB |
| | 125 | #ifdef CONFIG_SYS_STMICRO_BOOT |
| | 126 | /* ST Micro serial flash */ |
| | 127 | #define CONFIG_SYS_LOAD_ADDR2 0x40010013 |
| | 128 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| | 129 | "netdev=eth0\0" \ |
| | 130 | "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0" \ |
| | 131 | "loadaddr=0x40010000\0" \ |
| | 132 | "sbfhdr=sbfhdr.bin\0" \ |
| | 133 | "uboot=u-boot.bin\0" \ |
| | 134 | "load=tftp ${loadaddr} ${sbfhdr};" \ |
| | 135 | "tftp " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \ |
| | 136 | "upd=run load; run prog\0" \ |
| | 137 | "prog=sf probe 0:1 10000 1;" \ |
| | 138 | "sf erase 0 30000;" \ |
| | 139 | "sf write ${loadaddr} 0 0x30000;" \ |
| | 140 | "save\0" \ |
| | 141 | "" |
| | 142 | #else |
| | 143 | /* Atmel and Intel */ |
| | 144 | #ifdef CONFIG_SYS_ATMEL_BOOT |
| | 145 | # define CONFIG_SYS_UBOOT_END 0x0403FFFF |
| | 146 | #elif defined(CONFIG_SYS_INTEL_BOOT) |
| | 147 | # define CONFIG_SYS_UBOOT_END 0x3FFFF |
| | 148 | #endif |
| | 149 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| | 150 | "netdev=eth0\0" \ |
| | 151 | "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0" \ |
| | 152 | "loadaddr=0x40010000\0" \ |
| | 153 | "uboot=u-boot.bin\0" \ |
| | 154 | "load=tftp ${loadaddr} ${uboot}\0" \ |
| | 155 | "upd=run load; run prog\0" \ |
| | 156 | "prog=prot off " MK_STR(CONFIG_SYS_FLASH_BASE) \ |
| | 157 | " " MK_STR(CONFIG_SYS_UBOOT_END) ";" \ |
| | 158 | "era " MK_STR(CONFIG_SYS_FLASH_BASE) " " \ |
| | 159 | MK_STR(CONFIG_SYS_UBOOT_END) ";" \ |
| | 160 | "cp.b ${loadaddr} " MK_STR(CONFIG_SYS_FLASH_BASE) \ |
| | 161 | " ${filesize}; save\0" \ |
| | 162 | "" |
| | 163 | #endif |
| | 164 | |
| | 165 | /* ATA configuration */ |
| | 166 | #define CONFIG_ISO_PARTITION |
| | 167 | #define CONFIG_DOS_PARTITION |
| | 168 | #define CONFIG_IDE_RESET 1 |
| | 169 | #define CONFIG_IDE_PREINIT 1 |
| | 170 | #define CONFIG_ATAPI |
| | 171 | #undef CONFIG_LBA48 |
| | 172 | |
| | 173 | #define CONFIG_SYS_IDE_MAXBUS 1 |
| | 174 | #define CONFIG_SYS_IDE_MAXDEVICE 2 |
| | 175 | |
| | 176 | #define CONFIG_SYS_ATA_BASE_ADDR 0x90000000 |
| | 177 | #define CONFIG_SYS_ATA_IDE0_OFFSET 0 |
| | 178 | |
| | 179 | #define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ |
| | 180 | #define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ |
| | 181 | #define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ |
| | 182 | #define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ |
| | 183 | #define _IO_BASE 0 |
| | 184 | |
| | 185 | /* Realtime clock */ |
| | 186 | #define CONFIG_MCFRTC |
| | 187 | #undef RTC_DEBUG |
| | 188 | #define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ) |
| | 189 | |
| | 190 | /* Timer */ |
| | 191 | #define CONFIG_MCFTMR |
| | 192 | #undef CONFIG_MCFPIT |
| | 193 | |
| | 194 | /* I2c */ |
| | 195 | #define CONFIG_FSL_I2C |
| | 196 | #define CONFIG_HARD_I2C /* I2C with hardware support */ |
| | 197 | #undef CONFIG_SOFT_I2C /* I2C bit-banged */ |
| | 198 | #define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed and slave address */ |
| | 199 | #define CONFIG_SYS_I2C_SLAVE 0x7F |
| | 200 | #define CONFIG_SYS_I2C_OFFSET 0x58000 |
| | 201 | #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR |
| | 202 | |
| | 203 | /* DSPI and Serial Flash */ |
| | 204 | #define CONFIG_CF_DSPI |
| | 205 | #define CONFIG_HARD_SPI |
| | 206 | #define CONFIG_SYS_SER_FLASH_BASE 0x01000000 |
| | 207 | #define CONFIG_SYS_SBFHDR_SIZE 0x13 |
| | 208 | #ifdef CONFIG_CMD_SPI |
| | 209 | # define CONFIG_SPI_FLASH |
| | 210 | # define CONFIG_SPI_FLASH_STMICRO |
| | 211 | |
| | 212 | # define CONFIG_SYS_DSPI_DCTAR0 (DSPI_DCTAR_TRSZ(7) | \ |
| | 213 | DSPI_DCTAR_CPOL | \ |
| | 214 | DSPI_DCTAR_CPHA | \ |
| | 215 | DSPI_DCTAR_PCSSCK_1CLK | \ |
| | 216 | DSPI_DCTAR_PASC(0) | \ |
| | 217 | DSPI_DCTAR_PDT(0) | \ |
| | 218 | DSPI_DCTAR_CSSCK(0) | \ |
| | 219 | DSPI_DCTAR_ASC(0) | \ |
| | 220 | DSPI_DCTAR_PBR(0) | \ |
| | 221 | DSPI_DCTAR_DT(1) | \ |
| | 222 | DSPI_DCTAR_BR(1)) |
| | 223 | #endif |
| | 224 | |
| | 225 | /* PCI */ |
| | 226 | #ifdef CONFIG_CMD_PCI |
| | 227 | #define CONFIG_PCI 1 |
| | 228 | #define CONFIG_PCI_PNP 1 |
| | 229 | #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 |
| | 230 | |
| | 231 | #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 4 |
| | 232 | |
| | 233 | #define CONFIG_SYS_PCI_MEM_BUS 0xA0000000 |
| | 234 | #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS |
| | 235 | #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 |
| | 236 | |
| | 237 | #define CONFIG_SYS_PCI_IO_BUS 0xB1000000 |
| | 238 | #define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS |
| | 239 | #define CONFIG_SYS_PCI_IO_SIZE 0x01000000 |
| | 240 | |
| | 241 | #define CONFIG_SYS_PCI_CFG_BUS 0xB0000000 |
| | 242 | #define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS |
| | 243 | #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 |
| | 244 | #endif |
| | 245 | |
| | 246 | /* FPGA - Spartan 2 */ |
| | 247 | /* experiment |
| | 248 | #define CONFIG_FPGA CONFIG_SYS_SPARTAN3 |
| | 249 | #define CONFIG_FPGA_COUNT 1 |
| | 250 | #define CONFIG_SYS_FPGA_PROG_FEEDBACK |
| | 251 | #define CONFIG_SYS_FPGA_CHECK_CTRLC |
| | 252 | */ |
| | 253 | |
| | 254 | /* Input, PCI, Flexbus, and VCO */ |
| | 255 | #define CONFIG_EXTRA_CLOCK |
| | 256 | |
| | 257 | #define CONFIG_PRAM 2048 /* 2048 KB */ |
| | 258 | |
| | 259 | #define CONFIG_SYS_PROMPT "-> " |
| | 260 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| | 261 | |
| | 262 | #if defined(CONFIG_CMD_KGDB) |
| | 263 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| | 264 | #else |
| | 265 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| | 266 | #endif |
| | 267 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| | 268 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| | 269 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| | 270 | |
| | 271 | #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) |
| | 272 | |
| | 273 | #define CONFIG_SYS_HZ 1000 |
| | 274 | |
| | 275 | #define CONFIG_SYS_MBAR 0xFC000000 |
| | 276 | |
| | 277 | /* |
| | 278 | * Low Level Configuration Settings |
| | 279 | * (address mappings, register initial values, etc.) |
| | 280 | * You should know what you are doing if you make changes here. |
| | 281 | */ |
| | 282 | |
| | 283 | /*----------------------------------------------------------------------- |
| | 284 | * Definitions for initial stack pointer and data area (in DPRAM) |
| | 285 | */ |
| | 286 | #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 |
| | 287 | #define CONFIG_SYS_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ |
| | 288 | #define CONFIG_SYS_INIT_RAM_CTRL 0x221 |
| | 289 | #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ |
| | 290 | #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32) |
| | 291 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| | 292 | #define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - 32) |
| | 293 | |
| | 294 | /*----------------------------------------------------------------------- |
| | 295 | * Start addresses for the final memory configuration |
| | 296 | * (Set up by the startup code) |
| | 297 | * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 |
| | 298 | */ |
| | 299 | #define CONFIG_SYS_SDRAM_BASE 0x40000000 |
| | 300 | #define CONFIG_SYS_SDRAM_BASE1 0x48000000 |
| | 301 | #define CONFIG_SYS_SDRAM_SIZE 256 /* SDRAM size in MB */ |
| | 302 | #define CONFIG_SYS_SDRAM_CFG1 0x65311610 |
| | 303 | #define CONFIG_SYS_SDRAM_CFG2 0x59670000 |
| | 304 | #define CONFIG_SYS_SDRAM_CTRL 0xEA0B2000 |
| | 305 | #define CONFIG_SYS_SDRAM_EMOD 0x40010000 |
| | 306 | #define CONFIG_SYS_SDRAM_MODE 0x00010033 |
| | 307 | #define CONFIG_SYS_SDRAM_DRV_STRENGTH 0xAA |
| | 308 | |
| | 309 | #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 |
| | 310 | #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) |
| | 311 | |
| | 312 | #ifdef CONFIG_CF_SBF |
| | 313 | # define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400) |
| | 314 | #else |
| | 315 | # define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) |
| | 316 | #endif |
| | 317 | #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 |
| | 318 | #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ |
| | 319 | #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ |
| | 320 | |
| | 321 | /* |
| | 322 | * For booting Linux, the board info and command line data |
| | 323 | * have to be in the first 8 MB of memory, since this is |
| | 324 | * the maximum mapped by the Linux kernel during initialization ?? |
| | 325 | */ |
| | 326 | /* Initial Memory map for Linux */ |
| | 327 | #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) |
| | 328 | |
| | 329 | /* |
| | 330 | * Configuration for environment |
| | 331 | * Environment is embedded in u-boot in the second sector of the flash |
| | 332 | */ |
| | 333 | #ifdef CONFIG_CF_SBF |
| | 334 | # define CONFIG_ENV_IS_IN_SPI_FLASH |
| | 335 | # define CONFIG_ENV_SPI_CS 1 |
| | 336 | #else |
| | 337 | # define CONFIG_ENV_IS_IN_FLASH 1 |
| | 338 | #endif |
| | 339 | #undef CONFIG_ENV_OVERWRITE |
| | 340 | #undef CONFIG_ENV_IS_EMBEDDED |
| | 341 | |
| | 342 | /*----------------------------------------------------------------------- |
| | 343 | * FLASH organization |
| | 344 | */ |
| | 345 | #ifdef CONFIG_SYS_STMICRO_BOOT |
| | 346 | # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_SER_FLASH_BASE |
| | 347 | # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_SER_FLASH_BASE |
| | 348 | # define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS0_BASE |
| | 349 | # define CONFIG_SYS_FLASH2_BASE CONFIG_SYS_CS1_BASE |
| | 350 | # define CONFIG_ENV_OFFSET 0x30000 |
| | 351 | # define CONFIG_ENV_SIZE 0x2000 |
| | 352 | # define CONFIG_ENV_SECT_SIZE 0x10000 |
| | 353 | #endif |
| | 354 | #ifdef CONFIG_SYS_ATMEL_BOOT |
| | 355 | # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE |
| | 356 | # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE |
| | 357 | # define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE |
| | 358 | # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000) |
| | 359 | # define CONFIG_ENV_SECT_SIZE 0x2000 |
| | 360 | #endif |
| | 361 | #ifdef CONFIG_SYS_INTEL_BOOT |
| | 362 | # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE |
| | 363 | # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE |
| | 364 | # define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE |
| | 365 | # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) |
| | 366 | # define CONFIG_ENV_SIZE 0x2000 |
| | 367 | # define CONFIG_ENV_SECT_SIZE 0x20000 |
| | 368 | #endif |
| | 369 | |
| | 370 | #define CONFIG_SYS_FLASH_CFI |
| | 371 | #ifdef CONFIG_SYS_FLASH_CFI |
| | 372 | |
| | 373 | # define CONFIG_FLASH_CFI_DRIVER 1 |
| | 374 | # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ |
| | 375 | # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT |
| | 376 | # define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ |
| | 377 | # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ |
| | 378 | # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ |
| | 379 | # define CONFIG_SYS_FLASH_CHECKSUM |
| | 380 | # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE } |
| | 381 | # define CONFIG_FLASH_CFI_LEGACY |
| | 382 | |
| | 383 | #ifdef CONFIG_FLASH_CFI_LEGACY |
| | 384 | # define CONFIG_SYS_ATMEL_REGION 4 |
| | 385 | # define CONFIG_SYS_ATMEL_TOTALSECT 11 |
| | 386 | # define CONFIG_SYS_ATMEL_SECT {1, 2, 1, 7} |
| | 387 | # define CONFIG_SYS_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} |
| | 388 | #endif |
| | 389 | #endif |
| | 390 | |
| | 391 | /* |
| | 392 | * This is setting for JFFS2 support in u-boot. |
| | 393 | * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. |
| | 394 | */ |
| | 395 | #ifdef CONFIG_CMD_JFFS2 |
| | 396 | #ifdef CF_STMICRO_BOOT |
| | 397 | # define CONFIG_JFFS2_DEV "nor1" |
| | 398 | # define CONFIG_JFFS2_PART_SIZE 0x01000000 |
| | 399 | # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH2_BASE + 0x500000) |
| | 400 | #endif |
| | 401 | #ifdef CONFIG_SYS_ATMEL_BOOT |
| | 402 | # define CONFIG_JFFS2_DEV "nor1" |
| | 403 | # define CONFIG_JFFS2_PART_SIZE 0x01000000 |
| | 404 | # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH1_BASE + 0x500000) |
| | 405 | #endif |
| | 406 | #ifdef CONFIG_SYS_INTEL_BOOT |
| | 407 | # define CONFIG_JFFS2_DEV "nor0" |
| | 408 | # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) |
| | 409 | # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000) |
| | 410 | #endif |
| | 411 | #endif |
| | 412 | |
| | 413 | /*----------------------------------------------------------------------- |
| | 414 | * Cache Configuration |
| | 415 | */ |
| | 416 | #define CONFIG_SYS_CACHELINE_SIZE 16 |
| | 417 | |
| | 418 | /*----------------------------------------------------------------------- |
| | 419 | * Memory bank definitions |
| | 420 | */ |
| | 421 | /* |
| | 422 | * CS0 - NOR Flash 1, 2, 4, or 8MB |
| | 423 | * CS1 - CompactFlash and registers |
| | 424 | * CS2 - CPLD |
| | 425 | * CS3 - FPGA |
| | 426 | * CS4 - Available |
| | 427 | * CS5 - Available |
| | 428 | */ |
| | 429 | |
| | 430 | #if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT) |
| | 431 | /* Atmel Flash */ |
| | 432 | #define CONFIG_SYS_CS0_BASE 0x04000000 |
| | 433 | #define CONFIG_SYS_CS0_MASK 0x00070001 |
| | 434 | #define CONFIG_SYS_CS0_CTRL 0x00001140 |
| | 435 | /* Intel Flash */ |
| | 436 | #define CONFIG_SYS_CS1_BASE 0x00000000 |
| | 437 | #define CONFIG_SYS_CS1_MASK 0x01FF0001 |
| | 438 | #define CONFIG_SYS_CS1_CTRL 0x00000D60 |
| | 439 | |
| | 440 | #define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS0_BASE |
| | 441 | #else |
| | 442 | /* Intel Flash */ |
| | 443 | #define CONFIG_SYS_CS0_BASE 0x00000000 |
| | 444 | #define CONFIG_SYS_CS0_MASK 0x01FF0001 |
| | 445 | #define CONFIG_SYS_CS0_CTRL 0x00000D60 |
| | 446 | /* Atmel Flash */ |
| | 447 | #define CONFIG_SYS_CS1_BASE 0x04000000 |
| | 448 | #define CONFIG_SYS_CS1_MASK 0x00070001 |
| | 449 | #define CONFIG_SYS_CS1_CTRL 0x00001140 |
| | 450 | |
| | 451 | #define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS1_BASE |
| | 452 | #endif |
| | 453 | |
| | 454 | /* CPLD */ |
| | 455 | #define CONFIG_SYS_CS2_BASE 0x08000000 |
| | 456 | #define CONFIG_SYS_CS2_MASK 0x00070001 |
| | 457 | #define CONFIG_SYS_CS2_CTRL 0x003f1140 |
| | 458 | |
| | 459 | /* FPGA */ |
| | 460 | #define CONFIG_SYS_CS3_BASE 0x09000000 |
| | 461 | #define CONFIG_SYS_CS3_MASK 0x00070001 |
| | 462 | #define CONFIG_SYS_CS3_CTRL 0x00000020 |
| | 463 | |
| | 464 | #endif /* _M54455EVB_H */ |
projects / J-u-boot.git / blame_incremental