Git Repo - J-u-boot.git/blame_incremental

... / ...

Commit	Line	Data
	1	/*
	2	* (C) Copyright 2002
	3	* Wolfgang Denk, DENX Software Engineering, [email protected].
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23	#ifndef _POST_H
	24	#define _POST_H
	25
	26	#ifndef __ASSEMBLY__
	27	#include <common.h>
	28	#endif
	29
	30	#ifdef CONFIG_POST
	31
	32	#define POST_POWERON 0x01 /* test runs on power-on booting */
	33	#define POST_NORMAL 0x02 /* test runs on normal booting */
	34	#define POST_SLOWTEST 0x04 /* test is slow, enabled by key press */
	35	#define POST_POWERTEST 0x08 /* test runs after watchdog reset */
	36
	37	#define POST_COLDBOOT 0x80 /* first boot after power-on */
	38
	39	#define POST_ROM 0x0100 /* test runs in ROM */
	40	#define POST_RAM 0x0200 /* test runs in RAM */
	41	#define POST_MANUAL 0x0400 /* test runs on diag command */
	42	#define POST_REBOOT 0x0800 /* test may cause rebooting */
	43	#define POST_PREREL 0x1000 /* test runs before relocation */
	44
	45	#define POST_CRITICAL 0x2000 /* Use failbootcmd if test failed */
	46	#define POST_STOP 0x4000 /* Interrupt POST sequence on fail */
	47
	48	#define POST_MEM (POST_RAM \| POST_ROM)
	49	#define POST_ALWAYS (POST_NORMAL \| \
	50	POST_SLOWTEST \| \
	51	POST_MANUAL \| \
	52	POST_POWERON )
	53
	54	#define POST_FAIL_SAVE 0x80
	55
	56	#ifndef __ASSEMBLY__
	57
	58	struct post_test {
	59	char *name;
	60	char *cmd;
	61	char *desc;
	62	int flags;
	63	int (*test) (int flags);
	64	int (*init_f) (void);
	65	void (*reloc) (void);
	66	unsigned long testid;
	67	};
	68	int post_init_f (void);
	69	void post_bootmode_init (void);
	70	int post_bootmode_get (unsigned int * last_test);
	71	void post_bootmode_clear (void);
	72	void post_output_backlog ( void );
	73	int post_run (char *name, int flags);
	74	int post_info (char *name);
	75	int post_log (char *format, ...);
	76	void post_reloc (void);
	77	unsigned long post_time_ms (unsigned long base);
	78
	79	extern struct post_test post_list[];
	80	extern unsigned int post_list_size;
	81	extern int post_hotkeys_pressed(void);
	82
	83	#endif /* __ASSEMBLY__ */
	84
	85	#define CONFIG_SYS_POST_RTC 0x00000001
	86	#define CONFIG_SYS_POST_WATCHDOG 0x00000002
	87	#define CONFIG_SYS_POST_MEMORY 0x00000004
	88	#define CONFIG_SYS_POST_CPU 0x00000008
	89	#define CONFIG_SYS_POST_I2C 0x00000010
	90	#define CONFIG_SYS_POST_CACHE 0x00000020
	91	#define CONFIG_SYS_POST_UART 0x00000040
	92	#define CONFIG_SYS_POST_ETHER 0x00000080
	93	#define CONFIG_SYS_POST_SPI 0x00000100
	94	#define CONFIG_SYS_POST_USB 0x00000200
	95	#define CONFIG_SYS_POST_SPR 0x00000400
	96	#define CONFIG_SYS_POST_SYSMON 0x00000800
	97	#define CONFIG_SYS_POST_DSP 0x00001000
	98	#define CONFIG_SYS_POST_OCM 0x00002000
	99	#define CONFIG_SYS_POST_FPU 0x00004000
	100	#define CONFIG_SYS_POST_ECC 0x00008000
	101	#define CONFIG_SYS_POST_BSPEC1 0x00010000
	102	#define CONFIG_SYS_POST_BSPEC2 0x00020000
	103	#define CONFIG_SYS_POST_BSPEC3 0x00040000
	104	#define CONFIG_SYS_POST_BSPEC4 0x00080000
	105	#define CONFIG_SYS_POST_BSPEC5 0x00100000
	106	#define CONFIG_SYS_POST_CODEC 0x00200000
	107
	108	#endif /* CONFIG_POST */
	109
	110	#endif /* _POST_H */