| | 1 | CONFIG_ARM=y |
| | 2 | CONFIG_ARCH_ROCKCHIP=y |
| | 3 | CONFIG_SYS_MALLOC_F_LEN=0x2000 |
| | 4 | CONFIG_ROCKCHIP_RK3288=y |
| | 5 | CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y |
| | 6 | CONFIG_TARGET_POPMETAL_RK3288=y |
| | 7 | CONFIG_SPL_STACK_R_ADDR=0x80000 |
| | 8 | CONFIG_DEFAULT_DEVICE_TREE="rk3288-popmetal" |
| | 9 | CONFIG_SILENT_CONSOLE=y |
| | 10 | CONFIG_CONSOLE_MUX=y |
| | 11 | # CONFIG_DISPLAY_CPUINFO is not set |
| | 12 | CONFIG_SPL_STACK_R=y |
| | 13 | CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 |
| | 14 | # CONFIG_CMD_IMLS is not set |
| | 15 | CONFIG_CMD_MMC=y |
| | 16 | CONFIG_CMD_SF=y |
| | 17 | CONFIG_CMD_SPI=y |
| | 18 | CONFIG_CMD_I2C=y |
| | 19 | CONFIG_CMD_USB=y |
| | 20 | CONFIG_CMD_GPIO=y |
| | 21 | # CONFIG_CMD_SETEXPR is not set |
| | 22 | CONFIG_CMD_CACHE=y |
| | 23 | CONFIG_CMD_TIME=y |
| | 24 | CONFIG_CMD_PMIC=y |
| | 25 | CONFIG_CMD_REGULATOR=y |
| | 26 | # CONFIG_SPL_DOS_PARTITION is not set |
| | 27 | CONFIG_ISO_PARTITION=y |
| | 28 | # CONFIG_SPL_ISO_PARTITION is not set |
| | 29 | CONFIG_EFI_PARTITION=y |
| | 30 | # CONFIG_SPL_EFI_PARTITION is not set |
| | 31 | CONFIG_SPL_OF_CONTROL=y |
| | 32 | CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" |
| | 33 | CONFIG_REGMAP=y |
| | 34 | CONFIG_SPL_REGMAP=y |
| | 35 | CONFIG_SYSCON=y |
| | 36 | CONFIG_SPL_SYSCON=y |
| | 37 | # CONFIG_SPL_SIMPLE_BUS is not set |
| | 38 | CONFIG_CLK=y |
| | 39 | CONFIG_SPL_CLK=y |
| | 40 | CONFIG_ROCKCHIP_GPIO=y |
| | 41 | CONFIG_SYS_I2C_ROCKCHIP=y |
| | 42 | CONFIG_MMC_DW=y |
| | 43 | CONFIG_MMC_DW_ROCKCHIP=y |
| | 44 | CONFIG_PINCTRL=y |
| | 45 | CONFIG_SPL_PINCTRL=y |
| | 46 | # CONFIG_SPL_PINCTRL_FULL is not set |
| | 47 | CONFIG_ROCKCHIP_RK3288_PINCTRL=y |
| | 48 | CONFIG_DM_PMIC=y |
| | 49 | CONFIG_PMIC_RK808=y |
| | 50 | CONFIG_DM_REGULATOR_FIXED=y |
| | 51 | CONFIG_REGULATOR_RK808=y |
| | 52 | CONFIG_PWM_ROCKCHIP=y |
| | 53 | CONFIG_RAM=y |
| | 54 | CONFIG_SPL_RAM=y |
| | 55 | CONFIG_DEBUG_UART=y |
| | 56 | CONFIG_DEBUG_UART_BASE=0xff690000 |
| | 57 | CONFIG_DEBUG_UART_CLOCK=24000000 |
| | 58 | CONFIG_DEBUG_UART_SHIFT=2 |
| | 59 | CONFIG_SYS_NS16550=y |
| | 60 | CONFIG_SYSRESET=y |
| | 61 | CONFIG_USB=y |
| | 62 | CONFIG_USB_STORAGE=y |
| | 63 | CONFIG_USE_TINY_PRINTF=y |
| | 64 | CONFIG_CMD_DHRYSTONE=y |
| | 65 | CONFIG_ERRNO_STR=y |
projects / J-u-boot.git / blame_incremental