projects / J-u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 6706b115 CC |
1 | This file contains information for VSC9953, a Vitesse L2 Switch IP |
| 2 | which is integrated in the T1040/T1020 Freescale SoCs. | |
| 3 | ||
| 4 | About Device: | |
| 5 | ============= | |
| 6 | VSC9953 is an 8-port Gigabit Ethernet switch supports the following features: | |
| 7 | - 8192 MAC addresses | |
| 8 | - Static Address provisioning | |
| 9 | - Dynamic learning of MAC addresses and aging | |
| 10 | - 4096 VLANs | |
| 11 | - Independent and shared VLAN learning (IVL, SVL) | |
| 12 | - Policing with storm control and MC/BC protection | |
| 13 | - IPv4 and IPv6 multicast | |
| 14 | - Jumbo frames (9.6 KB) | |
| 15 | - Access Control List | |
| 16 | - VLAN editing, translation and remarking | |
| 17 | - RMON counters per port | |
| 18 | ||
| 19 | Switch interfaces: | |
| 20 | - 8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs | |
| 21 | - 2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links) | |
| 22 | to FMan ports (FM1@DTSEC1 and FM1@DTSEC2) | |
| 23 | ||
| 24 | Commands Overview: | |
| 25 | ============= | |
| 26 | Commands supported | |
| 3507cf7f CC |
27 | - enable/disable a port or show its configuration (speed, duplexity, status, etc.) |
| 28 | - port statistics | |
| 29 | - MAC learning | |
| 30 | - add/remove FDB entries | |
| 31 | - Port-based VLAN | |
| 32 | - Private/Shared VLAN learning | |
| 33 | - VLAN ingress filtering | |
| aae0e689 | 34 | - Port LAG |
| 6706b115 CC |
35 | |
| 36 | Commands syntax | |
| 3507cf7f CC |
37 | ethsw [port <port_no>] { enable | disable | show } - enable/disable a port; show a port's configuration |
| 38 | ethsw [port <port_no>] statistics { [help] | [clear] } - show an l2 switch port's statistics | |
| 39 | ethsw [port <port_no>] learning { [help] | show | auto | disable } - enable/disable/show learning configuration on a port | |
| 40 | ethsw [port <port_no>] [vlan <vid>] fdb { [help] | show | flush | { add | del } <mac> } - add/delete a mac entry in FDB; use show to see FDB entries; | |
| 41 | if [vlan <vid>] is missing, VID 1 will be used | |
| 42 | ethsw [port <port_no>] pvid { [help] | show | <pvid> } - set/show PVID (ingress and egress VLAN tagging) for a port | |
| 43 | ethsw [port <port_no>] vlan { [help] | show | add <vid> | del <vid> } - add a VLAN to a port (VLAN members) | |
| 44 | ethsw [port <port_no>] untagged { [help] | show | all | none | pvid } - set egress tagging mode for a port | |
| 45 | ethsw [port <port_no>] egress tag { [help] | show | pvid | classified } - configure VID source for egress tag. | |
| 46 | Tag's VID could be the frame's classified VID or the PVID of the port | |
| 47 | ethsw vlan fdb { [help] | show | shared | private } - make VLAN learning shared or private | |
| 48 | ethsw [port <port_no>] ingress filtering { [help] | show | enable | disable } - enable/disable VLAN ingress filtering on port | |
| aae0e689 | 49 | ethsw [port <port_no>] aggr { [help] | show | <lag_group_no> } - get/set LAG group for a port |
| 6706b115 | 50 | |
| 3507cf7f | 51 | => ethsw show |
| 6706b115 CC |
52 | Port Status Link Speed Duplex |
| 53 | 0 enabled down 10 half | |
| 54 | 1 enabled down 10 half | |
| 55 | 2 enabled down 10 half | |
| 56 | 3 enabled up 1000 full | |
| 57 | 4 disabled down - half | |
| 58 | 5 disabled down - half | |
| 59 | 6 disabled down - half | |
| 60 | 7 disabled down - half | |
| 61 | 8 enabled up 2500 full | |
| 62 | 9 enabled up 2500 full | |
| 63 | => |