[J-u-boot.git] / drivers / mmc / kona_sdhci.c

/*
 * Copyright 2013 Broadcom Corporation.
 *
 * SPDX-License-Identifier:      GPL-2.0+
 */

#include <common.h>
#include <malloc.h>
#include <sdhci.h>
#include <linux/errno.h>
#include <asm/kona-common/clk.h>

#define SDHCI_CORECTRL_OFFSET		0x00008000
#define SDHCI_CORECTRL_EN		0x01
#define SDHCI_CORECTRL_RESET		0x02

#define SDHCI_CORESTAT_OFFSET		0x00008004
#define SDHCI_CORESTAT_CD_SW		0x01

#define SDHCI_COREIMR_OFFSET		0x00008008
#define SDHCI_COREIMR_IP		0x01

static int init_kona_mmc_core(struct sdhci_host *host)
{
	unsigned int mask;
	unsigned int timeout;

	if (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & SDHCI_RESET_ALL) {
		printf("%s: sd host controller reset error\n", __func__);
		return -EBUSY;
	}

	/* For kona a hardware reset before anything else. */
	mask = sdhci_readl(host, SDHCI_CORECTRL_OFFSET) | SDHCI_CORECTRL_RESET;
	sdhci_writel(host, mask, SDHCI_CORECTRL_OFFSET);

	/* Wait max 100 ms */
	timeout = 1000;
	do {
		if (timeout == 0) {
			printf("%s: reset timeout error\n", __func__);
			return -ETIMEDOUT;
		}
		timeout--;
		udelay(100);
	} while (0 ==
		 (sdhci_readl(host, SDHCI_CORECTRL_OFFSET) &
		  SDHCI_CORECTRL_RESET));

	/* Clear the reset bit. */
	mask = mask & ~SDHCI_CORECTRL_RESET;
	sdhci_writel(host, mask, SDHCI_CORECTRL_OFFSET);

	/* Enable AHB clock */
	mask = sdhci_readl(host, SDHCI_CORECTRL_OFFSET);
	sdhci_writel(host, mask | SDHCI_CORECTRL_EN, SDHCI_CORECTRL_OFFSET);

	/* Enable interrupts */
	sdhci_writel(host, SDHCI_COREIMR_IP, SDHCI_COREIMR_OFFSET);

	/* Make sure Card is detected in controller */
	mask = sdhci_readl(host, SDHCI_CORESTAT_OFFSET);
	sdhci_writel(host, mask | SDHCI_CORESTAT_CD_SW, SDHCI_CORESTAT_OFFSET);

	/* Wait max 100 ms */
	timeout = 1000;
	while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
		if (timeout == 0) {
			printf("%s: CARD DETECT timeout error\n", __func__);
			return -ETIMEDOUT;
		}
		timeout--;
		udelay(100);
	}
	return 0;
}

int kona_sdhci_init(int dev_index, u32 min_clk, u32 quirks)
{
	int ret = 0;
	u32 max_clk;
	void *reg_base;
	struct sdhci_host *host = NULL;

	host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
	if (!host) {
		printf("%s: sdhci host malloc fail!\n", __func__);
		return -ENOMEM;
	}
	switch (dev_index) {
	case 0:
		reg_base = (void *)CONFIG_SYS_SDIO_BASE0;
		ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO0_MAX_CLK,
				      &max_clk);
		break;
	case 1:
		reg_base = (void *)CONFIG_SYS_SDIO_BASE1;
		ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO1_MAX_CLK,
				      &max_clk);
		break;
	case 2:
		reg_base = (void *)CONFIG_SYS_SDIO_BASE2;
		ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO2_MAX_CLK,
				      &max_clk);
		break;
	case 3:
		reg_base = (void *)CONFIG_SYS_SDIO_BASE3;
		ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO3_MAX_CLK,
				      &max_clk);
		break;
	default:
		printf("%s: sdio dev index %d not supported\n",
		       __func__, dev_index);
		ret = -EINVAL;
	}
	if (ret) {
		free(host);
		return ret;
	}

	host->name = "kona-sdhci";
	host->ioaddr = reg_base;
	host->quirks = quirks;
	host->max_clk = max_clk;

	if (init_kona_mmc_core(host)) {
		free(host);
		return -EINVAL;
	}

	add_sdhci(host, 0, min_clk);
	return ret;
}
Commit	Line	Data
7a9d0ad0 DR	1	/*
	2	* Copyright 2013 Broadcom Corporation.
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#include <common.h>
	8	#include <malloc.h>
	9	#include <sdhci.h>
1221ce45	10	#include <linux/errno.h>
7a9d0ad0 DR	11	#include <asm/kona-common/clk.h>
	12
	13	#define SDHCI_CORECTRL_OFFSET 0x00008000
	14	#define SDHCI_CORECTRL_EN 0x01
	15	#define SDHCI_CORECTRL_RESET 0x02
	16
	17	#define SDHCI_CORESTAT_OFFSET 0x00008004
	18	#define SDHCI_CORESTAT_CD_SW 0x01
	19
	20	#define SDHCI_COREIMR_OFFSET 0x00008008
	21	#define SDHCI_COREIMR_IP 0x01
	22
	23	static int init_kona_mmc_core(struct sdhci_host *host)
	24	{
	25	unsigned int mask;
	26	unsigned int timeout;
	27
	28	if (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & SDHCI_RESET_ALL) {
	29	printf("%s: sd host controller reset error\n", __func__);
2cb5d67c	30	return -EBUSY;
7a9d0ad0 DR	31	}
	32
	33	/* For kona a hardware reset before anything else. */
	34	mask = sdhci_readl(host, SDHCI_CORECTRL_OFFSET) \| SDHCI_CORECTRL_RESET;
	35	sdhci_writel(host, mask, SDHCI_CORECTRL_OFFSET);
	36
	37	/* Wait max 100 ms */
	38	timeout = 1000;
	39	do {
	40	if (timeout == 0) {
	41	printf("%s: reset timeout error\n", __func__);
2cb5d67c	42	return -ETIMEDOUT;
7a9d0ad0 DR	43	}
	44	timeout--;
	45	udelay(100);
	46	} while (0 ==
	47	(sdhci_readl(host, SDHCI_CORECTRL_OFFSET) &
	48	SDHCI_CORECTRL_RESET));
	49
	50	/* Clear the reset bit. */
	51	mask = mask & ~SDHCI_CORECTRL_RESET;
	52	sdhci_writel(host, mask, SDHCI_CORECTRL_OFFSET);
	53
	54	/* Enable AHB clock */
	55	mask = sdhci_readl(host, SDHCI_CORECTRL_OFFSET);
	56	sdhci_writel(host, mask \| SDHCI_CORECTRL_EN, SDHCI_CORECTRL_OFFSET);
	57
	58	/* Enable interrupts */
	59	sdhci_writel(host, SDHCI_COREIMR_IP, SDHCI_COREIMR_OFFSET);
	60
	61	/* Make sure Card is detected in controller */
	62	mask = sdhci_readl(host, SDHCI_CORESTAT_OFFSET);
	63	sdhci_writel(host, mask \| SDHCI_CORESTAT_CD_SW, SDHCI_CORESTAT_OFFSET);
	64
	65	/* Wait max 100 ms */
	66	timeout = 1000;
	67	while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
	68	if (timeout == 0) {
	69	printf("%s: CARD DETECT timeout error\n", __func__);
2cb5d67c	70	return -ETIMEDOUT;
7a9d0ad0 DR	71	}
	72	timeout--;
	73	udelay(100);
	74	}
	75	return 0;
	76	}
	77
	78	int kona_sdhci_init(int dev_index, u32 min_clk, u32 quirks)
	79	{
	80	int ret = 0;
	81	u32 max_clk;
	82	void *reg_base;
	83	struct sdhci_host *host = NULL;
	84
	85	host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
	86	if (!host) {
	87	printf("%s: sdhci host malloc fail!\n", __func__);
	88	return -ENOMEM;
	89	}
	90	switch (dev_index) {
	91	case 0:
	92	reg_base = (void *)CONFIG_SYS_SDIO_BASE0;
	93	ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO0_MAX_CLK,
	94	&max_clk);
	95	break;
	96	case 1:
	97	reg_base = (void *)CONFIG_SYS_SDIO_BASE1;
	98	ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO1_MAX_CLK,
	99	&max_clk);
	100	break;
	101	case 2:
	102	reg_base = (void *)CONFIG_SYS_SDIO_BASE2;
	103	ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO2_MAX_CLK,
	104	&max_clk);
	105	break;
	106	case 3:
	107	reg_base = (void *)CONFIG_SYS_SDIO_BASE3;
	108	ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO3_MAX_CLK,
	109	&max_clk);
	110	break;
	111	default:
	112	printf("%s: sdio dev index %d not supported\n",
	113	__func__, dev_index);
	114	ret = -EINVAL;
	115	}
3d6a5a4d DR	116	if (ret) {
3d6a5a4d DR	117	free(host);
7a9d0ad0	118	return ret;
3d6a5a4d	119	}
7a9d0ad0 DR	120
	121	host->name = "kona-sdhci";
	122	host->ioaddr = reg_base;
	123	host->quirks = quirks;
6d0e34bf	124	host->max_clk = max_clk;
7a9d0ad0	125
3d6a5a4d DR	126	if (init_kona_mmc_core(host)) {
3d6a5a4d DR	127	free(host);
7a9d0ad0	128	return -EINVAL;
3d6a5a4d	129	}
7a9d0ad0	130
6d0e34bf	131	add_sdhci(host, 0, min_clk);
7a9d0ad0 DR	132	return ret;
7a9d0ad0 DR	133	}