[J-u-boot.git] / include / sdhci.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright 2011, Marvell Semiconductor Inc.
 * Lei Wen <[email protected]>
 *
 * Back ported to the 8xx platform (from the 8260 platform) by
 * [email protected], 27-Jan-01.
 */
#ifndef __SDHCI_HW_H
#define __SDHCI_HW_H

#include <asm/io.h>
#include <mmc.h>
#include <asm/gpio.h>

/*
 * Controller registers
 */

#define SDHCI_DMA_ADDRESS	0x00

#define SDHCI_BLOCK_SIZE	0x04
#define  SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))

#define SDHCI_BLOCK_COUNT	0x06

#define SDHCI_ARGUMENT		0x08

#define SDHCI_TRANSFER_MODE	0x0C
#define  SDHCI_TRNS_DMA		BIT(0)
#define  SDHCI_TRNS_BLK_CNT_EN	BIT(1)
#define  SDHCI_TRNS_ACMD12	BIT(2)
#define  SDHCI_TRNS_READ	BIT(4)
#define  SDHCI_TRNS_MULTI	BIT(5)

#define SDHCI_COMMAND		0x0E
#define  SDHCI_CMD_RESP_MASK	0x03
#define  SDHCI_CMD_CRC		0x08
#define  SDHCI_CMD_INDEX	0x10
#define  SDHCI_CMD_DATA		0x20
#define  SDHCI_CMD_ABORTCMD	0xC0

#define  SDHCI_CMD_RESP_NONE	0x00
#define  SDHCI_CMD_RESP_LONG	0x01
#define  SDHCI_CMD_RESP_SHORT	0x02
#define  SDHCI_CMD_RESP_SHORT_BUSY 0x03

#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff))
#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)

#define SDHCI_RESPONSE		0x10

#define SDHCI_BUFFER		0x20

#define SDHCI_PRESENT_STATE	0x24
#define  SDHCI_CMD_INHIBIT	BIT(0)
#define  SDHCI_DATA_INHIBIT	BIT(1)
#define  SDHCI_DOING_WRITE	BIT(8)
#define  SDHCI_DOING_READ	BIT(9)
#define  SDHCI_SPACE_AVAILABLE	BIT(10)
#define  SDHCI_DATA_AVAILABLE	BIT(11)
#define  SDHCI_CARD_PRESENT	BIT(16)
#define  SDHCI_CARD_STATE_STABLE	BIT(17)
#define  SDHCI_CARD_DETECT_PIN_LEVEL	BIT(18)
#define  SDHCI_WRITE_PROTECT	BIT(19)

#define SDHCI_HOST_CONTROL	0x28
#define  SDHCI_CTRL_LED		BIT(0)
#define  SDHCI_CTRL_4BITBUS	BIT(1)
#define  SDHCI_CTRL_HISPD	BIT(2)
#define  SDHCI_CTRL_DMA_MASK	0x18
#define   SDHCI_CTRL_SDMA	0x00
#define   SDHCI_CTRL_ADMA1	0x08
#define   SDHCI_CTRL_ADMA32	0x10
#define   SDHCI_CTRL_ADMA64	0x18
#define  SDHCI_CTRL_8BITBUS	BIT(5)
#define  SDHCI_CTRL_CD_TEST_INS	BIT(6)
#define  SDHCI_CTRL_CD_TEST	BIT(7)

#define SDHCI_POWER_CONTROL	0x29
#define  SDHCI_POWER_ON		0x01
#define  SDHCI_POWER_180	0x0A
#define  SDHCI_POWER_300	0x0C
#define  SDHCI_POWER_330	0x0E

#define SDHCI_BLOCK_GAP_CONTROL	0x2A

#define SDHCI_WAKE_UP_CONTROL	0x2B
#define  SDHCI_WAKE_ON_INT	BIT(0)
#define  SDHCI_WAKE_ON_INSERT	BIT(1)
#define  SDHCI_WAKE_ON_REMOVE	BIT(2)

#define SDHCI_CLOCK_CONTROL	0x2C
#define  SDHCI_DIVIDER_SHIFT	8
#define  SDHCI_DIVIDER_HI_SHIFT	6
#define  SDHCI_DIV_MASK	0xFF
#define  SDHCI_DIV_MASK_LEN	8
#define  SDHCI_DIV_HI_MASK	0x300
#define  SDHCI_PROG_CLOCK_MODE  BIT(5)
#define  SDHCI_CLOCK_CARD_EN	BIT(2)
#define  SDHCI_CLOCK_INT_STABLE	BIT(1)
#define  SDHCI_CLOCK_INT_EN	BIT(0)

#define SDHCI_TIMEOUT_CONTROL	0x2E

#define SDHCI_SOFTWARE_RESET	0x2F
#define  SDHCI_RESET_ALL	0x01
#define  SDHCI_RESET_CMD	0x02
#define  SDHCI_RESET_DATA	0x04

#define SDHCI_INT_STATUS	0x30
#define SDHCI_INT_ENABLE	0x34
#define SDHCI_SIGNAL_ENABLE	0x38
#define  SDHCI_INT_RESPONSE	BIT(0)
#define  SDHCI_INT_DATA_END	BIT(1)
#define  SDHCI_INT_DMA_END	BIT(3)
#define  SDHCI_INT_SPACE_AVAIL	BIT(4)
#define  SDHCI_INT_DATA_AVAIL	BIT(5)
#define  SDHCI_INT_CARD_INSERT	BIT(6)
#define  SDHCI_INT_CARD_REMOVE	BIT(7)
#define  SDHCI_INT_CARD_INT	BIT(8)
#define  SDHCI_INT_ERROR	BIT(15)
#define  SDHCI_INT_TIMEOUT	BIT(16)
#define  SDHCI_INT_CRC		BIT(17)
#define  SDHCI_INT_END_BIT	BIT(18)
#define  SDHCI_INT_INDEX	BIT(19)
#define  SDHCI_INT_DATA_TIMEOUT	BIT(20)
#define  SDHCI_INT_DATA_CRC	BIT(21)
#define  SDHCI_INT_DATA_END_BIT	BIT(22)
#define  SDHCI_INT_BUS_POWER	BIT(23)
#define  SDHCI_INT_ACMD12ERR	BIT(24)
#define  SDHCI_INT_ADMA_ERROR	BIT(25)

#define  SDHCI_INT_NORMAL_MASK	0x00007FFF
#define  SDHCI_INT_ERROR_MASK	0xFFFF8000

#define  SDHCI_INT_CMD_MASK	(SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
		SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
#define  SDHCI_INT_DATA_MASK	(SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
		SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
		SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
		SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR)
#define SDHCI_INT_ALL_MASK	((unsigned int)-1)

#define SDHCI_ACMD12_ERR	0x3C

#define SDHCI_HOST_CONTROL2	0x3E
#define  SDHCI_CTRL_UHS_MASK	0x0007
#define  SDHCI_CTRL_UHS_SDR12	0x0000
#define  SDHCI_CTRL_UHS_SDR25	0x0001
#define  SDHCI_CTRL_UHS_SDR50	0x0002
#define  SDHCI_CTRL_UHS_SDR104	0x0003
#define  SDHCI_CTRL_UHS_DDR50	0x0004
#define  SDHCI_CTRL_HS400	0x0005 /* Non-standard */
#define  SDHCI_CTRL_VDD_180	0x0008
#define  SDHCI_CTRL_DRV_TYPE_MASK	0x0030
#define  SDHCI_CTRL_DRV_TYPE_B	0x0000
#define  SDHCI_CTRL_DRV_TYPE_A	0x0010
#define  SDHCI_CTRL_DRV_TYPE_C	0x0020
#define  SDHCI_CTRL_DRV_TYPE_D	0x0030
#define  SDHCI_CTRL_EXEC_TUNING	0x0040
#define  SDHCI_CTRL_TUNED_CLK	0x0080
#define  SDHCI_CTRL_PRESET_VAL_ENABLE	0x8000

#define SDHCI_CAPABILITIES	0x40
#define  SDHCI_TIMEOUT_CLK_MASK	0x0000003F
#define  SDHCI_TIMEOUT_CLK_SHIFT 0
#define  SDHCI_TIMEOUT_CLK_UNIT	0x00000080
#define  SDHCI_CLOCK_BASE_MASK	0x00003F00
#define  SDHCI_CLOCK_V3_BASE_MASK	0x0000FF00
#define  SDHCI_CLOCK_BASE_SHIFT	8
#define  SDHCI_MAX_BLOCK_MASK	0x00030000
#define  SDHCI_MAX_BLOCK_SHIFT  16
#define  SDHCI_CAN_DO_8BIT	BIT(18)
#define  SDHCI_CAN_DO_ADMA2	BIT(19)
#define  SDHCI_CAN_DO_ADMA1	BIT(20)
#define  SDHCI_CAN_DO_HISPD	BIT(21)
#define  SDHCI_CAN_DO_SDMA	BIT(22)
#define  SDHCI_CAN_VDD_330	BIT(24)
#define  SDHCI_CAN_VDD_300	BIT(25)
#define  SDHCI_CAN_VDD_180	BIT(26)
#define  SDHCI_CAN_64BIT	BIT(28)

#define SDHCI_CAPABILITIES_1	0x44
#define  SDHCI_SUPPORT_SDR50	0x00000001
#define  SDHCI_SUPPORT_SDR104	0x00000002
#define  SDHCI_SUPPORT_DDR50	0x00000004
#define  SDHCI_USE_SDR50_TUNING	0x00002000

#define  SDHCI_CLOCK_MUL_MASK	0x00FF0000
#define  SDHCI_CLOCK_MUL_SHIFT	16

#define SDHCI_MAX_CURRENT	0x48

/* 4C-4F reserved for more max current */

#define SDHCI_SET_ACMD12_ERROR	0x50
#define SDHCI_SET_INT_ERROR	0x52

#define SDHCI_ADMA_ERROR	0x54

/* 55-57 reserved */

#define SDHCI_ADMA_ADDRESS	0x58
#define SDHCI_ADMA_ADDRESS_HI	0x5c

/* 60-FB reserved */

#define SDHCI_SLOT_INT_STATUS	0xFC

#define SDHCI_HOST_VERSION	0xFE
#define  SDHCI_VENDOR_VER_MASK	0xFF00
#define  SDHCI_VENDOR_VER_SHIFT	8
#define  SDHCI_SPEC_VER_MASK	0x00FF
#define  SDHCI_SPEC_VER_SHIFT	0
#define   SDHCI_SPEC_100	0
#define   SDHCI_SPEC_200	1
#define   SDHCI_SPEC_300	2

#define SDHCI_GET_VERSION(x) (x->version & SDHCI_SPEC_VER_MASK)

/*
 * End of controller registers.
 */

#define SDHCI_MAX_DIV_SPEC_200	256
#define SDHCI_MAX_DIV_SPEC_300	2046

/*
 * quirks
 */
#define SDHCI_QUIRK_32BIT_DMA_ADDR	(1 << 0)
#define SDHCI_QUIRK_REG32_RW		(1 << 1)
#define SDHCI_QUIRK_BROKEN_R1B		(1 << 2)
#define SDHCI_QUIRK_NO_HISPD_BIT	(1 << 3)
#define SDHCI_QUIRK_BROKEN_VOLTAGE	(1 << 4)
/*
 * SDHCI_QUIRK_BROKEN_HISPD_MODE
 * the hardware cannot operate correctly in high-speed mode,
 * this quirk forces the sdhci host-controller to non high-speed mode
 */
#define SDHCI_QUIRK_BROKEN_HISPD_MODE	BIT(5)
#define SDHCI_QUIRK_WAIT_SEND_CMD	(1 << 6)
#define SDHCI_QUIRK_USE_WIDE8		(1 << 8)
#define SDHCI_QUIRK_NO_1_8_V		(1 << 9)

/* to make gcc happy */
struct sdhci_host;

/*
 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
 */
#define SDHCI_DEFAULT_BOUNDARY_SIZE	(512 * 1024)
#define SDHCI_DEFAULT_BOUNDARY_ARG	(7)
struct sdhci_ops {
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
	u32	(*read_l)(struct sdhci_host *host, int reg);
	u16	(*read_w)(struct sdhci_host *host, int reg);
	u8	(*read_b)(struct sdhci_host *host, int reg);
	void	(*write_l)(struct sdhci_host *host, u32 val, int reg);
	void	(*write_w)(struct sdhci_host *host, u16 val, int reg);
	void	(*write_b)(struct sdhci_host *host, u8 val, int reg);
#endif
	int	(*get_cd)(struct sdhci_host *host);
	void	(*set_control_reg)(struct sdhci_host *host);
	int	(*set_ios_post)(struct sdhci_host *host);
	void	(*set_clock)(struct sdhci_host *host, u32 div);
	int (*platform_execute_tuning)(struct mmc *host, u8 opcode);
	void (*set_delay)(struct sdhci_host *host);
};

#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
#define ADMA_MAX_LEN	65532
#ifdef CONFIG_DMA_ADDR_T_64BIT
#define ADMA_DESC_LEN	16
#else
#define ADMA_DESC_LEN	8
#endif
#define ADMA_TABLE_NO_ENTRIES (CONFIG_SYS_MMC_MAX_BLK_COUNT * \
			       MMC_MAX_BLOCK_LEN) / ADMA_MAX_LEN

#define ADMA_TABLE_SZ (ADMA_TABLE_NO_ENTRIES * ADMA_DESC_LEN)

/* Decriptor table defines */
#define ADMA_DESC_ATTR_VALID		BIT(0)
#define ADMA_DESC_ATTR_END		BIT(1)
#define ADMA_DESC_ATTR_INT		BIT(2)
#define ADMA_DESC_ATTR_ACT1		BIT(4)
#define ADMA_DESC_ATTR_ACT2		BIT(5)

#define ADMA_DESC_TRANSFER_DATA		ADMA_DESC_ATTR_ACT2
#define ADMA_DESC_LINK_DESC	(ADMA_DESC_ATTR_ACT1 | ADMA_DESC_ATTR_ACT2)

struct sdhci_adma_desc {
	u8 attr;
	u8 reserved;
	u16 len;
	u32 addr_lo;
#ifdef CONFIG_DMA_ADDR_T_64BIT
	u32 addr_hi;
#endif
} __packed;
#endif
struct sdhci_host {
	const char *name;
	void *ioaddr;
	unsigned int quirks;
	unsigned int host_caps;
	unsigned int version;
	unsigned int max_clk;   /* Maximum Base Clock frequency */
	unsigned int clk_mul;   /* Clock Multiplier value */
	unsigned int clock;
	struct mmc *mmc;
	const struct sdhci_ops *ops;
	int index;

	int bus_width;
	struct gpio_desc pwr_gpio;	/* Power GPIO */
	struct gpio_desc cd_gpio;		/* Card Detect GPIO */

	uint	voltages;

	struct mmc_config cfg;
	dma_addr_t start_addr;
	int flags;
#define USE_SDMA	(0x1 << 0)
#define USE_ADMA	(0x1 << 1)
#define USE_ADMA64	(0x1 << 2)
#define USE_DMA		(USE_SDMA | USE_ADMA | USE_ADMA64)
	dma_addr_t adma_addr;
#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
	struct sdhci_adma_desc *adma_desc_table;
	uint desc_slot;
#endif
};

#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS

static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
	if (unlikely(host->ops->write_l))
		host->ops->write_l(host, val, reg);
	else
		writel(val, host->ioaddr + reg);
}

static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
	if (unlikely(host->ops->write_w))
		host->ops->write_w(host, val, reg);
	else
		writew(val, host->ioaddr + reg);
}

static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
{
	if (unlikely(host->ops->write_b))
		host->ops->write_b(host, val, reg);
	else
		writeb(val, host->ioaddr + reg);
}

static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
{
	if (unlikely(host->ops->read_l))
		return host->ops->read_l(host, reg);
	else
		return readl(host->ioaddr + reg);
}

static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
{
	if (unlikely(host->ops->read_w))
		return host->ops->read_w(host, reg);
	else
		return readw(host->ioaddr + reg);
}

static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
{
	if (unlikely(host->ops->read_b))
		return host->ops->read_b(host, reg);
	else
		return readb(host->ioaddr + reg);
}

#else

static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
	writel(val, host->ioaddr + reg);
}

static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
	writew(val, host->ioaddr + reg);
}

static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
{
	writeb(val, host->ioaddr + reg);
}
static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
{
	return readl(host->ioaddr + reg);
}

static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
{
	return readw(host->ioaddr + reg);
}

static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
{
	return readb(host->ioaddr + reg);
}
#endif

#ifdef CONFIG_BLK
/**
 * sdhci_setup_cfg() - Set up the configuration for DWMMC
 *
 * This is used to set up an SDHCI device when you are using CONFIG_BLK.
 *
 * This should be called from your MMC driver's probe() method once you have
 * the information required.
 *
 * Generally your driver will have a platform data structure which holds both
 * the configuration (struct mmc_config) and the MMC device info (struct mmc).
 * For example:
 *
 * struct msm_sdhc_plat {
 *	struct mmc_config cfg;
 *	struct mmc mmc;
 * };
 *
 * ...
 *
 * Inside U_BOOT_DRIVER():
 *	.platdata_auto_alloc_size = sizeof(struct msm_sdhc_plat),
 *
 * To access platform data:
 *	struct msm_sdhc_plat *plat = dev_get_platdata(dev);
 *
 * See msm_sdhci.c for an example.
 *
 * @cfg:	Configuration structure to fill in (generally &plat->mmc)
 * @host:	SDHCI host structure
 * @f_max:	Maximum supported clock frequency in HZ (0 for default)
 * @f_min:	Minimum supported clock frequency in HZ (0 for default)
 */
int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
		    u32 f_max, u32 f_min);

/**
 * sdhci_bind() - Set up a new MMC block device
 *
 * This is used to set up an SDHCI block device when you are using CONFIG_BLK.
 * It should be called from your driver's bind() method.
 *
 * See msm_sdhci.c for an example.
 *
 * @dev:	Device to set up
 * @mmc:	Pointer to mmc structure (normally &plat->mmc)
 * @cfg:	Empty configuration structure (generally &plat->cfg). This is
 *		normally all zeroes at this point. The only purpose of passing
 *		this in is to set mmc->cfg to it.
 * @return 0 if OK, -ve if the block device could not be created
 */
int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg);
#else

/**
 * add_sdhci() - Add a new SDHCI interface
 *
 * This is used when you are not using CONFIG_BLK. Convert your driver over!
 *
 * @host:	SDHCI host structure
 * @f_max:	Maximum supported clock frequency in HZ (0 for default)
 * @f_min:	Minimum supported clock frequency in HZ (0 for default)
 * @return 0 if OK, -ve on error
 */
int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min);
#endif /* !CONFIG_BLK */

void sdhci_set_uhs_timing(struct sdhci_host *host);
#ifdef CONFIG_DM_MMC
/* Export the operations to drivers */
int sdhci_probe(struct udevice *dev);
int sdhci_set_clock(struct mmc *mmc, unsigned int clock);
extern const struct dm_mmc_ops sdhci_ops;
#else
#endif

#endif /* __SDHCI_HW_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
af62a557 LW	2	/*
	3	* Copyright 2011, Marvell Semiconductor Inc.
	4	* Lei Wen <[email protected]>
	5	*
af62a557 LW	6	* Back ported to the 8xx platform (from the 8260 platform) by
	7	* [email protected], 27-Jan-01.
	8	*/
	9	#ifndef __SDHCI_HW_H
	10	#define __SDHCI_HW_H
	11
	12	#include <asm/io.h>
6cf1b17c	13	#include <mmc.h>
0347960b	14	#include <asm/gpio.h>
6cf1b17c	15
af62a557 LW	16	/*
	17	* Controller registers
	18	*/
	19
	20	#define SDHCI_DMA_ADDRESS 0x00
	21
	22	#define SDHCI_BLOCK_SIZE 0x04
	23	#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) \| (blksz & 0xFFF))
	24
	25	#define SDHCI_BLOCK_COUNT 0x06
	26
	27	#define SDHCI_ARGUMENT 0x08
	28
	29	#define SDHCI_TRANSFER_MODE 0x0C
91914581 JC	30	#define SDHCI_TRNS_DMA BIT(0)
	31	#define SDHCI_TRNS_BLK_CNT_EN BIT(1)
	32	#define SDHCI_TRNS_ACMD12 BIT(2)
	33	#define SDHCI_TRNS_READ BIT(4)
	34	#define SDHCI_TRNS_MULTI BIT(5)
af62a557 LW	35
	36	#define SDHCI_COMMAND 0x0E
	37	#define SDHCI_CMD_RESP_MASK 0x03
	38	#define SDHCI_CMD_CRC 0x08
	39	#define SDHCI_CMD_INDEX 0x10
	40	#define SDHCI_CMD_DATA 0x20
	41	#define SDHCI_CMD_ABORTCMD 0xC0
	42
	43	#define SDHCI_CMD_RESP_NONE 0x00
	44	#define SDHCI_CMD_RESP_LONG 0x01
	45	#define SDHCI_CMD_RESP_SHORT 0x02
	46	#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
	47
	48	#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) \| (f & 0xff))
	49	#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f)
	50
	51	#define SDHCI_RESPONSE 0x10
	52
	53	#define SDHCI_BUFFER 0x20
	54
	55	#define SDHCI_PRESENT_STATE 0x24
91914581 JC	56	#define SDHCI_CMD_INHIBIT BIT(0)
	57	#define SDHCI_DATA_INHIBIT BIT(1)
	58	#define SDHCI_DOING_WRITE BIT(8)
	59	#define SDHCI_DOING_READ BIT(9)
	60	#define SDHCI_SPACE_AVAILABLE BIT(10)
	61	#define SDHCI_DATA_AVAILABLE BIT(11)
	62	#define SDHCI_CARD_PRESENT BIT(16)
	63	#define SDHCI_CARD_STATE_STABLE BIT(17)
	64	#define SDHCI_CARD_DETECT_PIN_LEVEL BIT(18)
	65	#define SDHCI_WRITE_PROTECT BIT(19)
af62a557 LW	66
af62a557 LW	67	#define SDHCI_HOST_CONTROL 0x28
91914581 JC	68	#define SDHCI_CTRL_LED BIT(0)
	69	#define SDHCI_CTRL_4BITBUS BIT(1)
	70	#define SDHCI_CTRL_HISPD BIT(2)
af62a557 LW	71	#define SDHCI_CTRL_DMA_MASK 0x18
	72	#define SDHCI_CTRL_SDMA 0x00
	73	#define SDHCI_CTRL_ADMA1 0x08
	74	#define SDHCI_CTRL_ADMA32 0x10
	75	#define SDHCI_CTRL_ADMA64 0x18
91914581 JC	76	#define SDHCI_CTRL_8BITBUS BIT(5)
	77	#define SDHCI_CTRL_CD_TEST_INS BIT(6)
	78	#define SDHCI_CTRL_CD_TEST BIT(7)
af62a557 LW	79
	80	#define SDHCI_POWER_CONTROL 0x29
	81	#define SDHCI_POWER_ON 0x01
	82	#define SDHCI_POWER_180 0x0A
	83	#define SDHCI_POWER_300 0x0C
	84	#define SDHCI_POWER_330 0x0E
	85
	86	#define SDHCI_BLOCK_GAP_CONTROL 0x2A
	87
	88	#define SDHCI_WAKE_UP_CONTROL 0x2B
91914581 JC	89	#define SDHCI_WAKE_ON_INT BIT(0)
	90	#define SDHCI_WAKE_ON_INSERT BIT(1)
	91	#define SDHCI_WAKE_ON_REMOVE BIT(2)
af62a557 LW	92
	93	#define SDHCI_CLOCK_CONTROL 0x2C
	94	#define SDHCI_DIVIDER_SHIFT 8
	95	#define SDHCI_DIVIDER_HI_SHIFT 6
	96	#define SDHCI_DIV_MASK 0xFF
	97	#define SDHCI_DIV_MASK_LEN 8
	98	#define SDHCI_DIV_HI_MASK 0x300
91914581 JC	99	#define SDHCI_PROG_CLOCK_MODE BIT(5)
	100	#define SDHCI_CLOCK_CARD_EN BIT(2)
	101	#define SDHCI_CLOCK_INT_STABLE BIT(1)
	102	#define SDHCI_CLOCK_INT_EN BIT(0)
af62a557 LW	103
	104	#define SDHCI_TIMEOUT_CONTROL 0x2E
	105
	106	#define SDHCI_SOFTWARE_RESET 0x2F
	107	#define SDHCI_RESET_ALL 0x01
	108	#define SDHCI_RESET_CMD 0x02
	109	#define SDHCI_RESET_DATA 0x04
	110
	111	#define SDHCI_INT_STATUS 0x30
	112	#define SDHCI_INT_ENABLE 0x34
	113	#define SDHCI_SIGNAL_ENABLE 0x38
91914581 JC	114	#define SDHCI_INT_RESPONSE BIT(0)
	115	#define SDHCI_INT_DATA_END BIT(1)
	116	#define SDHCI_INT_DMA_END BIT(3)
	117	#define SDHCI_INT_SPACE_AVAIL BIT(4)
	118	#define SDHCI_INT_DATA_AVAIL BIT(5)
	119	#define SDHCI_INT_CARD_INSERT BIT(6)
	120	#define SDHCI_INT_CARD_REMOVE BIT(7)
	121	#define SDHCI_INT_CARD_INT BIT(8)
	122	#define SDHCI_INT_ERROR BIT(15)
	123	#define SDHCI_INT_TIMEOUT BIT(16)
	124	#define SDHCI_INT_CRC BIT(17)
	125	#define SDHCI_INT_END_BIT BIT(18)
	126	#define SDHCI_INT_INDEX BIT(19)
	127	#define SDHCI_INT_DATA_TIMEOUT BIT(20)
	128	#define SDHCI_INT_DATA_CRC BIT(21)
	129	#define SDHCI_INT_DATA_END_BIT BIT(22)
	130	#define SDHCI_INT_BUS_POWER BIT(23)
	131	#define SDHCI_INT_ACMD12ERR BIT(24)
	132	#define SDHCI_INT_ADMA_ERROR BIT(25)
af62a557 LW	133
	134	#define SDHCI_INT_NORMAL_MASK 0x00007FFF
	135	#define SDHCI_INT_ERROR_MASK 0xFFFF8000
	136
	137	#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE \| SDHCI_INT_TIMEOUT \| \
	138	SDHCI_INT_CRC \| SDHCI_INT_END_BIT \| SDHCI_INT_INDEX)
	139	#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END \| SDHCI_INT_DMA_END \| \
	140	SDHCI_INT_DATA_AVAIL \| SDHCI_INT_SPACE_AVAIL \| \
	141	SDHCI_INT_DATA_TIMEOUT \| SDHCI_INT_DATA_CRC \| \
	142	SDHCI_INT_DATA_END_BIT \| SDHCI_INT_ADMA_ERROR)
	143	#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
	144
	145	#define SDHCI_ACMD12_ERR 0x3C
	146
d1c0a220 FA	147	#define SDHCI_HOST_CONTROL2 0x3E
	148	#define SDHCI_CTRL_UHS_MASK 0x0007
	149	#define SDHCI_CTRL_UHS_SDR12 0x0000
	150	#define SDHCI_CTRL_UHS_SDR25 0x0001
	151	#define SDHCI_CTRL_UHS_SDR50 0x0002
	152	#define SDHCI_CTRL_UHS_SDR104 0x0003
	153	#define SDHCI_CTRL_UHS_DDR50 0x0004
	154	#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
	155	#define SDHCI_CTRL_VDD_180 0x0008
	156	#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
	157	#define SDHCI_CTRL_DRV_TYPE_B 0x0000
	158	#define SDHCI_CTRL_DRV_TYPE_A 0x0010
	159	#define SDHCI_CTRL_DRV_TYPE_C 0x0020
	160	#define SDHCI_CTRL_DRV_TYPE_D 0x0030
	161	#define SDHCI_CTRL_EXEC_TUNING 0x0040
	162	#define SDHCI_CTRL_TUNED_CLK 0x0080
	163	#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
af62a557 LW	164
	165	#define SDHCI_CAPABILITIES 0x40
	166	#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
	167	#define SDHCI_TIMEOUT_CLK_SHIFT 0
	168	#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
	169	#define SDHCI_CLOCK_BASE_MASK 0x00003F00
	170	#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00
	171	#define SDHCI_CLOCK_BASE_SHIFT 8
	172	#define SDHCI_MAX_BLOCK_MASK 0x00030000
	173	#define SDHCI_MAX_BLOCK_SHIFT 16
91914581 JC	174	#define SDHCI_CAN_DO_8BIT BIT(18)
	175	#define SDHCI_CAN_DO_ADMA2 BIT(19)
	176	#define SDHCI_CAN_DO_ADMA1 BIT(20)
	177	#define SDHCI_CAN_DO_HISPD BIT(21)
	178	#define SDHCI_CAN_DO_SDMA BIT(22)
	179	#define SDHCI_CAN_VDD_330 BIT(24)
	180	#define SDHCI_CAN_VDD_300 BIT(25)
	181	#define SDHCI_CAN_VDD_180 BIT(26)
	182	#define SDHCI_CAN_64BIT BIT(28)
af62a557 LW	183
af62a557 LW	184	#define SDHCI_CAPABILITIES_1 0x44
b8e25ef1 SDPP	185	#define SDHCI_SUPPORT_SDR50 0x00000001
	186	#define SDHCI_SUPPORT_SDR104 0x00000002
	187	#define SDHCI_SUPPORT_DDR50 0x00000004
	188	#define SDHCI_USE_SDR50_TUNING 0x00002000
	189
a0d0d86f WY	190	#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
a0d0d86f WY	191	#define SDHCI_CLOCK_MUL_SHIFT 16
af62a557 LW	192
	193	#define SDHCI_MAX_CURRENT 0x48
	194
	195	/* 4C-4F reserved for more max current */
	196
	197	#define SDHCI_SET_ACMD12_ERROR 0x50
	198	#define SDHCI_SET_INT_ERROR 0x52
	199
	200	#define SDHCI_ADMA_ERROR 0x54
	201
	202	/* 55-57 reserved */
	203
	204	#define SDHCI_ADMA_ADDRESS 0x58
37cb626d	205	#define SDHCI_ADMA_ADDRESS_HI 0x5c
af62a557 LW	206
	207	/* 60-FB reserved */
	208
	209	#define SDHCI_SLOT_INT_STATUS 0xFC
	210
	211	#define SDHCI_HOST_VERSION 0xFE
	212	#define SDHCI_VENDOR_VER_MASK 0xFF00
	213	#define SDHCI_VENDOR_VER_SHIFT 8
	214	#define SDHCI_SPEC_VER_MASK 0x00FF
	215	#define SDHCI_SPEC_VER_SHIFT 0
	216	#define SDHCI_SPEC_100 0
	217	#define SDHCI_SPEC_200 1
	218	#define SDHCI_SPEC_300 2
	219
113e5dfc JC	220	#define SDHCI_GET_VERSION(x) (x->version & SDHCI_SPEC_VER_MASK)
113e5dfc JC	221
af62a557 LW	222	/*
	223	* End of controller registers.
	224	*/
	225
	226	#define SDHCI_MAX_DIV_SPEC_200 256
	227	#define SDHCI_MAX_DIV_SPEC_300 2046
	228
	229	/*
	230	* quirks
	231	*/
	232	#define SDHCI_QUIRK_32BIT_DMA_ADDR (1 << 0)
5af9a569	233	#define SDHCI_QUIRK_REG32_RW (1 << 1)
3a638320	234	#define SDHCI_QUIRK_BROKEN_R1B (1 << 2)
236bfecf JC	235	#define SDHCI_QUIRK_NO_HISPD_BIT (1 << 3)
236bfecf JC	236	#define SDHCI_QUIRK_BROKEN_VOLTAGE (1 << 4)
88a57125 HS	237	/*
	238	* SDHCI_QUIRK_BROKEN_HISPD_MODE
	239	* the hardware cannot operate correctly in high-speed mode,
	240	* this quirk forces the sdhci host-controller to non high-speed mode
	241	*/
	242	#define SDHCI_QUIRK_BROKEN_HISPD_MODE BIT(5)
13243f2e	243	#define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6)
113e5dfc	244	#define SDHCI_QUIRK_USE_WIDE8 (1 << 8)
b8e25ef1	245	#define SDHCI_QUIRK_NO_1_8_V (1 << 9)
af62a557	246
0d2f15f9 LW	247	/* to make gcc happy */
	248	struct sdhci_host;
	249
af62a557 LW	250	/*
	251	* Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
	252	*/
	253	#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
	254	#define SDHCI_DEFAULT_BOUNDARY_ARG (7)
	255	struct sdhci_ops {
	256	#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
62226b68 JC	257	u32 (read_l)(struct sdhci_host host, int reg);
	258	u16 (read_w)(struct sdhci_host host, int reg);
	259	u8 (read_b)(struct sdhci_host host, int reg);
	260	void (write_l)(struct sdhci_host host, u32 val, int reg);
	261	void (write_w)(struct sdhci_host host, u16 val, int reg);
	262	void (write_b)(struct sdhci_host host, u8 val, int reg);
af62a557	263	#endif
62226b68 JC	264	int (get_cd)(struct sdhci_host host);
62226b68 JC	265	void (set_control_reg)(struct sdhci_host host);
a8185c50	266	int (set_ios_post)(struct sdhci_host host);
62226b68	267	void (set_clock)(struct sdhci_host host, u32 div);
2fc3ed5d SDPP	268	int (platform_execute_tuning)(struct mmc host, u8 opcode);
2fc3ed5d SDPP	269	void (set_delay)(struct sdhci_host host);
af62a557 LW	270	};
af62a557 LW	271
37cb626d FA	272	#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
	273	#define ADMA_MAX_LEN 65532
	274	#ifdef CONFIG_DMA_ADDR_T_64BIT
	275	#define ADMA_DESC_LEN 16
	276	#else
	277	#define ADMA_DESC_LEN 8
	278	#endif
	279	#define ADMA_TABLE_NO_ENTRIES (CONFIG_SYS_MMC_MAX_BLK_COUNT * \
	280	MMC_MAX_BLOCK_LEN) / ADMA_MAX_LEN
	281
	282	#define ADMA_TABLE_SZ (ADMA_TABLE_NO_ENTRIES * ADMA_DESC_LEN)
	283
	284	/* Decriptor table defines */
	285	#define ADMA_DESC_ATTR_VALID BIT(0)
	286	#define ADMA_DESC_ATTR_END BIT(1)
	287	#define ADMA_DESC_ATTR_INT BIT(2)
	288	#define ADMA_DESC_ATTR_ACT1 BIT(4)
	289	#define ADMA_DESC_ATTR_ACT2 BIT(5)
	290
	291	#define ADMA_DESC_TRANSFER_DATA ADMA_DESC_ATTR_ACT2
	292	#define ADMA_DESC_LINK_DESC (ADMA_DESC_ATTR_ACT1 \| ADMA_DESC_ATTR_ACT2)
	293
	294	struct sdhci_adma_desc {
	295	u8 attr;
	296	u8 reserved;
	297	u16 len;
	298	u32 addr_lo;
	299	#ifdef CONFIG_DMA_ADDR_T_64BIT
	300	u32 addr_hi;
	301	#endif
	302	} __packed;
	303	#endif
af62a557	304	struct sdhci_host {
cacd1d2f	305	const char *name;
af62a557 LW	306	void *ioaddr;
af62a557 LW	307	unsigned int quirks;
236bfecf	308	unsigned int host_caps;
af62a557	309	unsigned int version;
6d0e34bf	310	unsigned int max_clk; /* Maximum Base Clock frequency */
6dffdbc3	311	unsigned int clk_mul; /* Clock Multiplier value */
af62a557	312	unsigned int clock;
6cf1b17c	313	struct mmc *mmc;
af62a557	314	const struct sdhci_ops *ops;
b09ed6e4	315	int index;
236bfecf	316
3577fe8b	317	int bus_width;
0347960b SG	318	struct gpio_desc pwr_gpio; /* Power GPIO */
0347960b SG	319	struct gpio_desc cd_gpio; /* Card Detect GPIO */
3577fe8b	320
236bfecf	321	uint voltages;
93bfd616 PA	322
93bfd616 PA	323	struct mmc_config cfg;
6d6af205 FA	324	dma_addr_t start_addr;
	325	int flags;
	326	#define USE_SDMA (0x1 << 0)
37cb626d FA	327	#define USE_ADMA (0x1 << 1)
	328	#define USE_ADMA64 (0x1 << 2)
	329	#define USE_DMA (USE_SDMA \| USE_ADMA \| USE_ADMA64)
	330	dma_addr_t adma_addr;
	331	#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
	332	struct sdhci_adma_desc *adma_desc_table;
	333	uint desc_slot;
	334	#endif
af62a557 LW	335	};
	336
	337	#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
	338
	339	static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
	340	{
	341	if (unlikely(host->ops->write_l))
	342	host->ops->write_l(host, val, reg);
	343	else
	344	writel(val, host->ioaddr + reg);
	345	}
	346
	347	static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
	348	{
	349	if (unlikely(host->ops->write_w))
	350	host->ops->write_w(host, val, reg);
	351	else
	352	writew(val, host->ioaddr + reg);
	353	}
	354
	355	static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
	356	{
	357	if (unlikely(host->ops->write_b))
	358	host->ops->write_b(host, val, reg);
	359	else
	360	writeb(val, host->ioaddr + reg);
	361	}
	362
	363	static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
	364	{
	365	if (unlikely(host->ops->read_l))
	366	return host->ops->read_l(host, reg);
	367	else
	368	return readl(host->ioaddr + reg);
	369	}
	370
	371	static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
	372	{
	373	if (unlikely(host->ops->read_w))
	374	return host->ops->read_w(host, reg);
	375	else
	376	return readw(host->ioaddr + reg);
	377	}
	378
	379	static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
	380	{
	381	if (unlikely(host->ops->read_b))
	382	return host->ops->read_b(host, reg);
	383	else
	384	return readb(host->ioaddr + reg);
	385	}
	386
	387	#else
	388
	389	static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg)
	390	{
	391	writel(val, host->ioaddr + reg);
	392	}
	393
	394	static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg)
	395	{
	396	writew(val, host->ioaddr + reg);
	397	}
	398
399	static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
400	{
401	writeb(val, host->ioaddr + reg);
402	}
403	static inline u32 sdhci_readl(struct sdhci_host *host, int reg)
404	{
405	return readl(host->ioaddr + reg);
406	}
407
408	static inline u16 sdhci_readw(struct sdhci_host *host, int reg)
409	{
410	return readw(host->ioaddr + reg);
411	}
412
413	static inline u8 sdhci_readb(struct sdhci_host *host, int reg)
414	{
415	return readb(host->ioaddr + reg);
416	}
417	#endif
418
ef1e4eda SG	419	#ifdef CONFIG_BLK
	420	/**
	421	* sdhci_setup_cfg() - Set up the configuration for DWMMC
	422	*
	423	* This is used to set up an SDHCI device when you are using CONFIG_BLK.
	424	*
	425	* This should be called from your MMC driver's probe() method once you have
	426	* the information required.
	427	*
	428	* Generally your driver will have a platform data structure which holds both
	429	* the configuration (struct mmc_config) and the MMC device info (struct mmc).
	430	* For example:
	431	*
	432	* struct msm_sdhc_plat {
	433	* struct mmc_config cfg;
	434	* struct mmc mmc;
	435	* };
	436	*
	437	* ...
	438	*
	439	* Inside U_BOOT_DRIVER():
	440	* .platdata_auto_alloc_size = sizeof(struct msm_sdhc_plat),
	441	*
	442	* To access platform data:
	443	* struct msm_sdhc_plat *plat = dev_get_platdata(dev);
	444	*
	445	* See msm_sdhci.c for an example.
	446	*
	447	* @cfg: Configuration structure to fill in (generally &plat->mmc)
14bed52d	448	* @host: SDHCI host structure
6d0e34bf SH	449	* @f_max: Maximum supported clock frequency in HZ (0 for default)
6d0e34bf SH	450	* @f_min: Minimum supported clock frequency in HZ (0 for default)
ef1e4eda	451	*/
14bed52d	452	int sdhci_setup_cfg(struct mmc_config cfg, struct sdhci_host host,
6d0e34bf	453	u32 f_max, u32 f_min);
ef1e4eda SG	454
	455	/**
	456	* sdhci_bind() - Set up a new MMC block device
	457	*
	458	* This is used to set up an SDHCI block device when you are using CONFIG_BLK.
	459	* It should be called from your driver's bind() method.
	460	*
	461	* See msm_sdhci.c for an example.
	462	*
	463	* @dev: Device to set up
	464	* @mmc: Pointer to mmc structure (normally &plat->mmc)
	465	* @cfg: Empty configuration structure (generally &plat->cfg). This is
	466	* normally all zeroes at this point. The only purpose of passing
	467	* this in is to set mmc->cfg to it.
	468	* @return 0 if OK, -ve if the block device could not be created
	469	*/
	470	int sdhci_bind(struct udevice dev, struct mmc mmc, struct mmc_config *cfg);
	471	#else
	472
	473	/**
	474	* add_sdhci() - Add a new SDHCI interface
	475	*
	476	* This is used when you are not using CONFIG_BLK. Convert your driver over!
	477	*
	478	* @host: SDHCI host structure
6d0e34bf SH	479	* @f_max: Maximum supported clock frequency in HZ (0 for default)
6d0e34bf SH	480	* @f_min: Minimum supported clock frequency in HZ (0 for default)
ef1e4eda SG	481	* @return 0 if OK, -ve on error
ef1e4eda SG	482	*/
6d0e34bf	483	int add_sdhci(struct sdhci_host *host, u32 f_max, u32 f_min);
ef1e4eda SG	484	#endif /* !CONFIG_BLK */
ef1e4eda SG	485
d1c0a220	486	void sdhci_set_uhs_timing(struct sdhci_host *host);
e7881d85	487	#ifdef CONFIG_DM_MMC
ef1e4eda SG	488	/* Export the operations to drivers */
ef1e4eda SG	489	int sdhci_probe(struct udevice *dev);
3966c7d0	490	int sdhci_set_clock(struct mmc *mmc, unsigned int clock);
ef1e4eda SG	491	extern const struct dm_mmc_ops sdhci_ops;
	492	#else
	493	#endif
	494
af62a557	495	#endif /* __SDHCI_HW_H */