[J-u-boot.git] / include / configs / platinum.h

/*
 * Copyright (C) 2014, Barco (www.barco.com)
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __PLATINUM_CONFIG_H__
#define __PLATINUM_CONFIG_H__

#define CONFIG_SYS_GENERIC_BOARD

/* SPL */
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT

/* Location in NAND to read U-Boot from */
#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)

#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
#include "mx6_common.h"
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

/*
 * Console configuration
 */

#include <config_cmd_default.h>
#define CONFIG_CMD_BMODE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FUSE
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_I2C
#undef  CONFIG_CMD_IMLS
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_TIME
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_CMD_USB

/*
 * Hardware configuration
 */

/* GPIO config */
#define CONFIG_MXC_GPIO

/* UART config */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE			UART1_BASE
#define CONFIG_BAUDRATE				115200
#define CONFIG_CONS_INDEX			1

/* I2C config */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED			100000

/* MMC config */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR		0
#define CONFIG_SYS_FSL_USDHC_NUM		1
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_DOS_PARTITION

/* Ethernet config */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE				ENET_BASE_ADDR

#define CONFIG_PHYLIB

/* USB config */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_MXC_USB_PORT			1
#define CONFIG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS			0

/* Memory config */
#define CONFIG_NR_DRAM_BANKS			1
#define PHYS_SDRAM				MMDC0_ARB_BASE_ADDR
#ifndef PHYS_SDRAM_SIZE
#define PHYS_SDRAM_SIZE				(1024 << 20)
#endif

#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR		IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE		IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET		(CONFIG_SYS_INIT_RAM_SIZE - \
						 GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR			(CONFIG_SYS_INIT_RAM_ADDR + \
						 CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_SYS_MALLOC_LEN			(16 * 1024 * 1024)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#ifdef CONFIG_CMD_NAND

/* NAND config */
#define CONFIG_NAND_MXS
#ifndef CONFIG_SYS_NAND_MAX_CHIPS
#define CONFIG_SYS_NAND_MAX_CHIPS		2
#endif
#define CONFIG_SYS_MAX_NAND_DEVICE		1
#define CONFIG_SYS_NAND_BASE			0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION

/* DMA config, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* Fuse support */
#define CONFIG_MXC_OCOTP

/* Environment in NAND */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET		(16 << 20)
#define CONFIG_ENV_SECT_SIZE		(128 << 10)
#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + (512 << 10))
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE

#else /* CONFIG_CMD_NAND */

/* Environment in MMC */
#define CONFIG_ENV_SIZE			(8 << 10)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0

#endif /* CONFIG_CMD_NAND */

/*
 * U-Boot configuration
 */

/* Console boot messages */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

/* Tag config */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

/* Board startup config */
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

/* Device tree support */
#define CONFIG_OF_LIBFDT

#define CONFIG_LOADADDR				0x12000000
#define CONFIG_SYS_TEXT_BASE			0x17800000

#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + \
						 PHYS_SDRAM_SIZE - (12 << 20))

#define CONFIG_BOOTDELAY			3
#define CONFIG_BOOTCOMMAND			"run bootubi_scr"

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER

#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_PREBOOT

#define CONFIG_SYS_CBSIZE			256

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
						 sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS			16
#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE

#define CONFIG_SYS_LOAD_ADDR			CONFIG_LOADADDR

/* MTD/UBI/UBIFS config */
#define CONFIG_LZO
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_RBTREE

#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
				"512k(env1),512k(env2),-(ubi)"
#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
				"512k(env1),512k(env2),495M(ubi0)," \
				"14M(res0),2M(res1)," \
				"512k(res2),512k(res3),-(ubi1)"
#endif

#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif

/*
 * Environment configuration
 */

#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
#define CONFIG_COMMON_ENV_UBI						\
	"setubipartition=env set ubipartition ubi\0"			\
	"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
#define CONFIG_COMMON_ENV_UBI						\
	"setubipartition=env set ubipartition ubi$boot_vol\0"		\
	"setubirfs=env set ubirfs ubi0:rootfs\0"
#endif

#define CONFIG_COMMON_ENV_MISC						\
	"user=user\0"							\
	"project="CONFIG_PLATINUM_PROJECT"\0"				\
	"uimage=uImage\0"						\
	"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
	"serverip=serverip\0"						\
	"memaddrlinux=0x10800000\0"					\
	"memaddrsrc=0x11000000\0"					\
	"memaddrdtb=0x12000000\0"					\
	"console=ttymxc0\0"						\
	"baudrate=115200\0"						\
	"boot_scr=boot.uboot\0"						\
	"boot_vol=0\0"							\
	"mtdids="MTDIDS_DEFAULT"\0"					\
	"mtdparts="MTDPARTS_DEFAULT"\0"					\
	"mmcfs=ext2\0"							\
	"mmcrootpart=1\0"						\
	\
	"setnfspath=env set nfspath /home/nfs/$user/$project/root\0"	\
	"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
	"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0"	\
	"setubifilelinux=env set ubifilelinux boot/$uimage\0"		\
	"setubipfiledtb=env set ubifiledtb boot/$dtb\0"			\
	"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0"	\
	"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0"		\
	"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0"			\
	\
	"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0"		\
	"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0"			\
	"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0"		\
	"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0"		\
	"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux "	\
		"$mmcfilelinux\0"					\
	"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb "	\
		"$mmcfiledtb\0"						\
	\
	"ubipart=ubi part $ubipartition\0"				\
	"ubimount=ubifsmount $ubirfs\0"					\
	\
	"setbootargscommon=env set bootargs $bootargs "			\
		"console=$console,$baudrate enable_wait_mode=off\0"	\
	"setbootargsmtd=env set bootargs $bootargs $mtdparts\0"		\
	"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0"		\
	"setbootargsubirfs=env set bootargs $bootargs "			\
		"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
	"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs "	\
		"nfsroot=$serverip:$nfspath,v3,tcp\0"			\
	"setbootargsmmcrfs=env set bootargs $bootargs "			\
		"root=$mmcrootdev rootwait rw\0"			\
	\
	"bootnet=run settftpfilelinux settftpfiledtb setnfspath "	\
		"setbootargscommon setbootargsmtd setbootargsdhcp "	\
			"setbootargsnfsrfs;"				\
			"run loadtftpkernel loadtftpdtb;"		\
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;"		\
			"run setubipartition setubirfs;"		\
			"run setbootargscommon setbootargsmtd "		\
				"setbootargsubirfs;"			\
			"run loadtftpkernel loadtftpdtb;"		\
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	"bootubi=run setubipartition setubirfs setubifilelinux "	\
				"setubipfiledtb;"			\
			"run setbootargscommon setbootargsmtd "		\
				"setbootargsubirfs;"			\
			"run ubipart ubimount loadubikernel loadubidtb;" \
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	"bootubi_scr=run setubipartition setubirfs;"			\
			"run ubipart ubimount;"				\
			"if ubifsload ${memaddrsrc} boot/${boot_scr}; "	\
			"then source ${memaddrsrc}; else run bootubi; fi\0" \
	"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb "	\
			"setbootargscommon setbootargsmmcrfs;"		\
			"run loadmmckernel loadmmcdtb;"			\
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	\
	"bootcmd="CONFIG_BOOTCOMMAND"\0"

#define CONFIG_COMMON_ENV_SETTINGS			CONFIG_COMMON_ENV_MISC \
							CONFIG_COMMON_ENV_UBI
#endif /* __PLATINUM_CONFIG_H__ */
Commit	Line	Data
5d6050fd SR	1	/*
	2	* Copyright (C) 2014, Barco (www.barco.com)
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __PLATINUM_CONFIG_H__
	8	#define __PLATINUM_CONFIG_H__
	9
	10	#define CONFIG_SYS_GENERIC_BOARD
	11
	12	/* SPL */
	13	#define CONFIG_SPL_NAND_SUPPORT
	14	#define CONFIG_SPL_MMC_SUPPORT
	15
	16	/* Location in NAND to read U-Boot from */
	17	#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
	18
	19	#include "imx6_spl.h" /* common IMX6 SPL configuration */
	20	#include "mx6_common.h"
	21	#include <asm/arch/imx-regs.h>
	22	#include <asm/imx-common/gpio.h>
	23
	24	/*
	25	* Console configuration
	26	*/
	27
	28	#include <config_cmd_default.h>
	29	#define CONFIG_CMD_BMODE
	30	#define CONFIG_CMD_DHCP
	31	#define CONFIG_CMD_EXT2
	32	#define CONFIG_CMD_FAT
	33	#define CONFIG_CMD_FUSE
	34	#define CONFIG_CMD_GPIO
	35	#define CONFIG_CMD_I2C
	36	#undef CONFIG_CMD_IMLS
	37	#define CONFIG_CMD_MII
	38	#define CONFIG_CMD_MMC
	39	#define CONFIG_CMD_MTDPARTS
	40	#define CONFIG_CMD_NAND
	41	#define CONFIG_CMD_NAND_TRIMFFS
	42	#define CONFIG_CMD_NET
	43	#define CONFIG_CMD_PING
	44	#define CONFIG_CMD_TIME
	45	#define CONFIG_CMD_UBI
	46	#define CONFIG_CMD_UBIFS
	47	#define CONFIG_CMD_USB
	48
	49	/*
	50	* Hardware configuration
	51	*/
	52
	53	/* GPIO config */
	54	#define CONFIG_MXC_GPIO
	55
	56	/* UART config */
	57	#define CONFIG_MXC_UART
	58	#define CONFIG_MXC_UART_BASE UART1_BASE
	59	#define CONFIG_BAUDRATE 115200
	60	#define CONFIG_CONS_INDEX 1
	61
	62	/* I2C config */
	63	#define CONFIG_SYS_I2C
	64	#define CONFIG_SYS_I2C_MXC
f8cb101e	65	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
5d6050fd SR	66	#define CONFIG_SYS_I2C_SPEED 100000
	67
	68	/* MMC config */
	69	#define CONFIG_FSL_ESDHC
	70	#define CONFIG_FSL_USDHC
	71	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	72	#define CONFIG_SYS_FSL_USDHC_NUM 1
	73	#define CONFIG_MMC
	74	#define CONFIG_GENERIC_MMC
	75	#define CONFIG_BOUNCE_BUFFER
	76	#define CONFIG_DOS_PARTITION
	77
	78	/* Ethernet config */
	79	#define CONFIG_FEC_MXC
	80	#define CONFIG_MII
	81	#define IMX_FEC_BASE ENET_BASE_ADDR
	82
	83	#define CONFIG_PHYLIB
	84
	85	/* USB config */
	86	#define CONFIG_USB_EHCI
	87	#define CONFIG_USB_EHCI_MX6
	88	#define CONFIG_USB_STORAGE
	89	#define CONFIG_MXC_USB_PORT 1
	90	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	91	#define CONFIG_MXC_USB_FLAGS 0
	92
	93	/* Memory config */
	94	#define CONFIG_NR_DRAM_BANKS 1
	95	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	96	#ifndef PHYS_SDRAM_SIZE
	97	#define PHYS_SDRAM_SIZE (1024 << 20)
	98	#endif
	99
	100	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	101	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	102	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	103
	104	#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
	105	GENERATED_GBL_DATA_SIZE)
	106	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	107	CONFIG_SYS_INIT_SP_OFFSET)
	108
	109	#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
	110
	111	/* FLASH and environment organization */
	112	#define CONFIG_SYS_NO_FLASH
	113
	114	#ifdef CONFIG_CMD_NAND
	115
	116	/* NAND config */
	117	#define CONFIG_NAND_MXS
	118	#ifndef CONFIG_SYS_NAND_MAX_CHIPS
	119	#define CONFIG_SYS_NAND_MAX_CHIPS 2
	120	#endif
	121	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	122	#define CONFIG_SYS_NAND_BASE 0x40000000
	123	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	124	#define CONFIG_SYS_NAND_ONFI_DETECTION
	125
	126	/* DMA config, needed for GPMI/MXS NAND support */
	127	#define CONFIG_APBH_DMA
	128	#define CONFIG_APBH_DMA_BURST
	129	#define CONFIG_APBH_DMA_BURST8
130
131	/* Fuse support */
132	#define CONFIG_MXC_OCOTP
133
134	/* Environment in NAND */
135	#define CONFIG_ENV_IS_IN_NAND
136	#define CONFIG_ENV_OFFSET (16 << 20)
137	#define CONFIG_ENV_SECT_SIZE (128 << 10)
138	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
139	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
140	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
141
142	#else /* CONFIG_CMD_NAND */
143
144	/* Environment in MMC */
145	#define CONFIG_ENV_SIZE (8 << 10)
146	#define CONFIG_ENV_IS_IN_MMC
147	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
148	#define CONFIG_SYS_MMC_ENV_DEV 0
149
150	#endif /* CONFIG_CMD_NAND */
151
152	/*
153	* U-Boot configuration
154	*/
155
156	/* Console boot messages */
157	#define CONFIG_DISPLAY_CPUINFO
158	#define CONFIG_DISPLAY_BOARDINFO
159
160	/* Tag config */
161	#define CONFIG_CMDLINE_TAG
162	#define CONFIG_SETUP_MEMORY_TAGS
163	#define CONFIG_INITRD_TAG
164	#define CONFIG_REVISION_TAG
165
166	/* Board startup config */
167	#define CONFIG_BOARD_EARLY_INIT_F
168	#define CONFIG_MISC_INIT_R
169
170	/* allow to overwrite serial and ethaddr */
171	#define CONFIG_ENV_OVERWRITE
172
173	/* Device tree support */
174	#define CONFIG_OF_LIBFDT
175
176	#define CONFIG_LOADADDR 0x12000000
177	#define CONFIG_SYS_TEXT_BASE 0x17800000
178
179	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
180	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
181	PHYS_SDRAM_SIZE - (12 << 20))
182
183	#define CONFIG_BOOTDELAY 3
184	#define CONFIG_BOOTCOMMAND "run bootubi_scr"
185
186	/* Miscellaneous configurable options */
187	#define CONFIG_SYS_LONGHELP
188	#define CONFIG_SYS_HUSH_PARSER
189
190	#define CONFIG_AUTO_COMPLETE
191	#define CONFIG_CMDLINE_EDITING
192	#define CONFIG_PREBOOT
193
194	#define CONFIG_SYS_CBSIZE 256
195
196	/* Print Buffer Size */
197	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
198	sizeof(CONFIG_SYS_PROMPT) + 16)
199	#define CONFIG_SYS_MAXARGS 16
200	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
201
202	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
203
204	/* MTD/UBI/UBIFS config */
205	#define CONFIG_LZO
206	#define CONFIG_MTD_DEVICE
207	#define CONFIG_MTD_PARTITIONS
208	#define CONFIG_RBTREE
209
210	#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
211	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
212	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
213	"512k(env1),512k(env2),-(ubi)"
214	#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
215	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
216	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
217	"512k(env1),512k(env2),495M(ubi0)," \
218	"14M(res0),2M(res1)," \
219	"512k(res2),512k(res3),-(ubi1)"
220	#endif
221
222	#ifndef CONFIG_SYS_DCACHE_OFF
223	#define CONFIG_CMD_CACHE
224	#endif
225
226	/*
227	* Environment configuration
228	*/
229
230	#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
231	#define CONFIG_COMMON_ENV_UBI \
232	"setubipartition=env set ubipartition ubi\0" \
233	"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
234	#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
235	#define CONFIG_COMMON_ENV_UBI \
236	"setubipartition=env set ubipartition ubi$boot_vol\0" \
237	"setubirfs=env set ubirfs ubi0:rootfs\0"
238	#endif
239
240	#define CONFIG_COMMON_ENV_MISC \
241	"user=user\0" \
242	"project="CONFIG_PLATINUM_PROJECT"\0" \
243	"uimage=uImage\0" \
244	"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
245	"serverip=serverip\0" \
246	"memaddrlinux=0x10800000\0" \
247	"memaddrsrc=0x11000000\0" \
248	"memaddrdtb=0x12000000\0" \
249	"console=ttymxc0\0" \
250	"baudrate=115200\0" \
251	"boot_scr=boot.uboot\0" \
252	"boot_vol=0\0" \
253	"mtdids="MTDIDS_DEFAULT"\0" \
254	"mtdparts="MTDPARTS_DEFAULT"\0" \
255	"mmcfs=ext2\0" \
256	"mmcrootpart=1\0" \
257	\
258	"setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \
259	"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
260	"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \
261	"setubifilelinux=env set ubifilelinux boot/$uimage\0" \
262	"setubipfiledtb=env set ubifiledtb boot/$dtb\0" \
263	"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \
264	"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \
265	"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \
266	\
267	"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \
268	"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \
269	"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \
270	"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \
271	"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \
272	"$mmcfilelinux\0" \
273	"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \
274	"$mmcfiledtb\0" \
275	\
276	"ubipart=ubi part $ubipartition\0" \
277	"ubimount=ubifsmount $ubirfs\0" \
278	\
279	"setbootargscommon=env set bootargs $bootargs " \
280	"console=$console,$baudrate enable_wait_mode=off\0" \
281	"setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \
282	"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \
283	"setbootargsubirfs=env set bootargs $bootargs " \
284	"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
285	"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \
286	"nfsroot=$serverip:$nfspath,v3,tcp\0" \
287	"setbootargsmmcrfs=env set bootargs $bootargs " \
288	"root=$mmcrootdev rootwait rw\0" \
289	\
290	"bootnet=run settftpfilelinux settftpfiledtb setnfspath " \
291	"setbootargscommon setbootargsmtd setbootargsdhcp " \
292	"setbootargsnfsrfs;" \
293	"run loadtftpkernel loadtftpdtb;" \
294	"bootm $memaddrlinux - $memaddrdtb\0" \
295	"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \
296	"run setubipartition setubirfs;" \
297	"run setbootargscommon setbootargsmtd " \
298	"setbootargsubirfs;" \
299	"run loadtftpkernel loadtftpdtb;" \
300	"bootm $memaddrlinux - $memaddrdtb\0" \
301	"bootubi=run setubipartition setubirfs setubifilelinux " \
302	"setubipfiledtb;" \
303	"run setbootargscommon setbootargsmtd " \
304	"setbootargsubirfs;" \
305	"run ubipart ubimount loadubikernel loadubidtb;" \
306	"bootm $memaddrlinux - $memaddrdtb\0" \
307	"bootubi_scr=run setubipartition setubirfs;" \
308	"run ubipart ubimount;" \
309	"if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
310	"then source ${memaddrsrc}; else run bootubi; fi\0" \
311	"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \
312	"setbootargscommon setbootargsmmcrfs;" \
313	"run loadmmckernel loadmmcdtb;" \
314	"bootm $memaddrlinux - $memaddrdtb\0" \
315	\
316	"bootcmd="CONFIG_BOOTCOMMAND"\0"
317
318	#define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \
319	CONFIG_COMMON_ENV_UBI
320	#endif /* __PLATINUM_CONFIG_H__ */