[J-u-boot.git] / include / i8042.h

/*
 * (C) Copyright 2002 ELTEC Elektronik AG
 * Frank Gottschling <[email protected]>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/* i8042.h - Intel 8042 keyboard driver header */

#ifndef _I8042_H_
#define _I8042_H_

/* defines */

#define I8042_DATA_REG	0x60	/* keyboard i/o buffer */
#define I8042_STS_REG	0x64	/* keyboard status read */
#define I8042_CMD_REG	0x64	/* keyboard ctrl write */

/* Status register bit defines */
#define STATUS_OBF	(1 << 0)
#define STATUS_IBF	(1 << 1)

/* Configuration byte bit defines */
#define CONFIG_KIRQ_EN	(1 << 0)
#define CONFIG_MIRQ_EN	(1 << 1)
#define CONFIG_SET_BIST	(1 << 2)
#define CONFIG_KCLK_DIS	(1 << 4)
#define CONFIG_MCLK_DIS	(1 << 5)
#define CONFIG_AT_TRANS	(1 << 6)

/* i8042 commands */
#define CMD_RD_CONFIG	0x20	/* read configuration byte */
#define CMD_WR_CONFIG	0x60	/* write configuration byte */
#define CMD_SELF_TEST	0xaa	/* controller self-test */
#define CMD_KBD_DIS	0xad	/* keyboard disable */
#define CMD_KBD_EN	0xae	/* keyboard enable */
#define CMD_SET_KBD_LED	0xed	/* set keyboard led */
#define CMD_DRAIN_OUTPUT 0xf4   /* drain output buffer */
#define CMD_RESET_KBD	0xff	/* reset keyboard */

/* i8042 command result */
#define KBC_TEST_OK	0x55
#define KBD_ACK		0xfa
#define KBD_POR		0xaa

/* keyboard scan codes */

#define KBD_US		0	/* default US layout */
#define KBD_GER		1	/* german layout */

#define KBD_TIMEOUT	1000	/* 1 sec */
#define KBD_RESET_TRIES	3

#define AS		0	/* normal character index */
#define SH		1	/* shift index */
#define CN		2	/* control index */
#define NM		3	/* numeric lock index */
#define AK		4	/* right alt key */
#define CP		5	/* capslock index */
#define ST		6	/* stop output index */
#define EX		7	/* extended code index */
#define ES		8	/* escape and extended code index */

#define NORMAL		0x0000	/* normal key */
#define STP		0x0001	/* scroll lock stop output*/
#define NUM		0x0002	/* numeric lock */
#define CAPS		0x0004	/* capslock */
#define SHIFT		0x0008	/* shift */
#define CTRL		0x0010	/* control*/
#define EXT		0x0020	/* extended scan code 0xe0 */
#define ESC		0x0040	/* escape key press */
#define E1		0x0080	/* extended scan code 0xe1 */
#define BRK		0x0100	/* make break flag for keyboard */
#define ALT		0x0200	/* right alt */

/* exports */

/**
 * Flush all buffer from keyboard controller to host.
 */
void i8042_flush(void);

/**
 * Disables the keyboard so that key strokes no longer generate scancodes to
 * the host.
 *
 * @return 0 if ok, -1 if keyboard input was found while disabling
 */
int i8042_disable(void);

#endif /* _I8042_H_ */
Commit	Line	Data
1df49e27 WD	1	/*
	2	* (C) Copyright 2002 ELTEC Elektronik AG
	3	* Frank Gottschling <[email protected]>
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
1df49e27 WD	6	*/
	7
	8	/* i8042.h - Intel 8042 keyboard driver header */
	9
	10	#ifndef _I8042_H_
	11	#define _I8042_H_
	12
	13	/* defines */
	14
835dd000 BM	15	#define I8042_DATA_REG 0x60 /* keyboard i/o buffer */
	16	#define I8042_STS_REG 0x64 /* keyboard status read */
	17	#define I8042_CMD_REG 0x64 /* keyboard ctrl write */
	18
	19	/* Status register bit defines */
	20	#define STATUS_OBF (1 << 0)
	21	#define STATUS_IBF (1 << 1)
	22
	23	/* Configuration byte bit defines */
	24	#define CONFIG_KIRQ_EN (1 << 0)
	25	#define CONFIG_MIRQ_EN (1 << 1)
	26	#define CONFIG_SET_BIST (1 << 2)
	27	#define CONFIG_KCLK_DIS (1 << 4)
	28	#define CONFIG_MCLK_DIS (1 << 5)
	29	#define CONFIG_AT_TRANS (1 << 6)
	30
	31	/* i8042 commands */
	32	#define CMD_RD_CONFIG 0x20 /* read configuration byte */
	33	#define CMD_WR_CONFIG 0x60 /* write configuration byte */
	34	#define CMD_SELF_TEST 0xaa /* controller self-test */
	35	#define CMD_KBD_DIS 0xad /* keyboard disable */
	36	#define CMD_KBD_EN 0xae /* keyboard enable */
	37	#define CMD_SET_KBD_LED 0xed /* set keyboard led */
8226a3e9	38	#define CMD_DRAIN_OUTPUT 0xf4 /* drain output buffer */
835dd000 BM	39	#define CMD_RESET_KBD 0xff /* reset keyboard */
	40
	41	/* i8042 command result */
	42	#define KBC_TEST_OK 0x55
	43	#define KBD_ACK 0xfa
	44	#define KBD_POR 0xaa
	45
	46	/* keyboard scan codes */
	47
	48	#define KBD_US 0 /* default US layout */
	49	#define KBD_GER 1 /* german layout */
	50
	51	#define KBD_TIMEOUT 1000 /* 1 sec */
	52	#define KBD_RESET_TRIES 3
	53
	54	#define AS 0 /* normal character index */
	55	#define SH 1 /* shift index */
	56	#define CN 2 /* control index */
	57	#define NM 3 /* numeric lock index */
	58	#define AK 4 /* right alt key */
	59	#define CP 5 /* capslock index */
	60	#define ST 6 /* stop output index */
	61	#define EX 7 /* extended code index */
	62	#define ES 8 /* escape and extended code index */
	63
	64	#define NORMAL 0x0000 /* normal key */
	65	#define STP 0x0001 /* scroll lock stop output*/
	66	#define NUM 0x0002 /* numeric lock */
	67	#define CAPS 0x0004 /* capslock */
	68	#define SHIFT 0x0008 /* shift */
	69	#define CTRL 0x0010 /* control*/
	70	#define EXT 0x0020 /* extended scan code 0xe0 */
	71	#define ESC 0x0040 /* escape key press */
	72	#define E1 0x0080 /* extended scan code 0xe1 */
	73	#define BRK 0x0100 /* make break flag for keyboard */
	74	#define ALT 0x0200 /* right alt */
1df49e27 WD	75
	76	/* exports */
	77
45fe668f LYCL	78	/**
	79	* Flush all buffer from keyboard controller to host.
	80	*/
	81	void i8042_flush(void);
	82
	83	/**
	84	* Disables the keyboard so that key strokes no longer generate scancodes to
	85	* the host.
	86	*
	87	* @return 0 if ok, -1 if keyboard input was found while disabling
	88	*/
	89	int i8042_disable(void);
	90
1df49e27	91	#endif /* _I8042_H_ */