]>
Commit | Line | Data |
---|---|---|
be8313fe LP |
1 | // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
2 | /* | |
3 | * Microsemi SoCs serial gpio driver | |
4 | * | |
5 | * Author: <[email protected]> | |
6 | * | |
7 | * Copyright (c) 2018 Microsemi Corporation | |
8 | */ | |
9 | ||
10 | #include <common.h> | |
11 | #include <dm.h> | |
f7ae49fc | 12 | #include <log.h> |
be8313fe LP |
13 | #include <asm/gpio.h> |
14 | #include <asm/io.h> | |
15 | #include <errno.h> | |
16 | #include <clk.h> | |
336d4615 | 17 | #include <dm/device_compat.h> |
61b29b82 | 18 | #include <linux/err.h> |
be8313fe LP |
19 | |
20 | #define MSCC_SGPIOS_PER_BANK 32 | |
21 | #define MSCC_SGPIO_BANK_DEPTH 4 | |
22 | ||
23 | enum { | |
24 | REG_INPUT_DATA, | |
25 | REG_PORT_CONFIG, | |
26 | REG_PORT_ENABLE, | |
27 | REG_SIO_CONFIG, | |
28 | REG_SIO_CLOCK, | |
29 | MAXREG | |
30 | }; | |
31 | ||
32 | struct mscc_sgpio_bf { | |
33 | u8 beg; | |
34 | u8 end; | |
35 | }; | |
36 | ||
37 | struct mscc_sgpio_props { | |
38 | u8 regoff[MAXREG]; | |
39 | struct mscc_sgpio_bf auto_repeat; | |
40 | struct mscc_sgpio_bf port_width; | |
41 | struct mscc_sgpio_bf clk_freq; | |
42 | struct mscc_sgpio_bf bit_source; | |
43 | }; | |
44 | ||
45 | #define __M(bf) GENMASK((bf).end, (bf).beg) | |
46 | #define __F(bf, x) (__M(bf) & ((x) << (bf).beg)) | |
47 | #define __X(bf, x) (((x) >> (bf).beg) & GENMASK(((bf).end - (bf).beg), 0)) | |
48 | ||
49 | #define MSCC_M_CFG_SIO_AUTO_REPEAT(p) BIT(p->props->auto_repeat.beg) | |
50 | #define MSCC_F_CFG_SIO_PORT_WIDTH(p, x) __F(p->props->port_width, x) | |
51 | #define MSCC_M_CFG_SIO_PORT_WIDTH(p) __M(p->props->port_width) | |
52 | #define MSCC_F_CLOCK_SIO_CLK_FREQ(p, x) __F(p->props->clk_freq, x) | |
53 | #define MSCC_M_CLOCK_SIO_CLK_FREQ(p) __M(p->props->clk_freq) | |
54 | #define MSCC_F_PORT_CFG_BIT_SOURCE(p, x) __F(p->props->bit_source, x) | |
55 | #define MSCC_X_PORT_CFG_BIT_SOURCE(p, x) __X(p->props->bit_source, x) | |
56 | ||
57 | const struct mscc_sgpio_props props_luton = { | |
58 | .regoff = { 0x00, 0x09, 0x29, 0x2a, 0x2b }, | |
59 | .auto_repeat = { 5, 5 }, | |
60 | .port_width = { 2, 3 }, | |
61 | .clk_freq = { 0, 11 }, | |
62 | .bit_source = { 0, 11 }, | |
63 | }; | |
64 | ||
65 | const struct mscc_sgpio_props props_ocelot = { | |
66 | .regoff = { 0x00, 0x06, 0x26, 0x04, 0x05 }, | |
67 | .auto_repeat = { 10, 10 }, | |
68 | .port_width = { 7, 8 }, | |
69 | .clk_freq = { 8, 19 }, | |
70 | .bit_source = { 12, 23 }, | |
71 | }; | |
72 | ||
73 | struct mscc_sgpio_priv { | |
74 | u32 bitcount; | |
75 | u32 ports; | |
76 | u32 clock; | |
77 | u32 mode[MSCC_SGPIOS_PER_BANK]; | |
78 | u32 __iomem *regs; | |
79 | const struct mscc_sgpio_props *props; | |
80 | }; | |
81 | ||
82 | static inline u32 sgpio_readl(struct mscc_sgpio_priv *priv, u32 rno, u32 off) | |
83 | { | |
84 | u32 __iomem *reg = &priv->regs[priv->props->regoff[rno] + off]; | |
85 | ||
86 | return readl(reg); | |
87 | } | |
88 | ||
89 | static inline void sgpio_writel(struct mscc_sgpio_priv *priv, | |
90 | u32 val, u32 rno, u32 off) | |
91 | { | |
92 | u32 __iomem *reg = &priv->regs[priv->props->regoff[rno] + off]; | |
93 | ||
94 | writel(val, reg); | |
95 | } | |
96 | ||
97 | static void sgpio_clrsetbits(struct mscc_sgpio_priv *priv, | |
98 | u32 rno, u32 off, u32 clear, u32 set) | |
99 | { | |
100 | u32 __iomem *reg = &priv->regs[priv->props->regoff[rno] + off]; | |
101 | ||
102 | clrsetbits_le32(reg, clear, set); | |
103 | } | |
104 | ||
105 | static int mscc_sgpio_direction_input(struct udevice *dev, unsigned int gpio) | |
106 | { | |
107 | struct mscc_sgpio_priv *priv = dev_get_priv(dev); | |
108 | ||
109 | u32 port = gpio % MSCC_SGPIOS_PER_BANK; | |
110 | u32 bit = gpio / MSCC_SGPIOS_PER_BANK; | |
111 | ||
112 | priv->mode[port] |= BIT(bit); | |
113 | ||
114 | return 0; | |
115 | } | |
116 | ||
117 | static int mscc_sgpio_direction_output(struct udevice *dev, | |
118 | unsigned int gpio, int value) | |
119 | { | |
120 | struct mscc_sgpio_priv *priv = dev_get_priv(dev); | |
121 | u32 port = gpio % MSCC_SGPIOS_PER_BANK; | |
122 | u32 bit = gpio / MSCC_SGPIOS_PER_BANK; | |
123 | u32 mask = 3 << (3 * bit); | |
124 | ||
125 | debug("set: port %d, bit %d, mask 0x%08x, value %d\n", | |
126 | port, bit, mask, value); | |
127 | ||
128 | value = (value & 3) << (3 * bit); | |
129 | sgpio_clrsetbits(priv, REG_PORT_CONFIG, port, | |
130 | MSCC_F_PORT_CFG_BIT_SOURCE(priv, mask), | |
131 | MSCC_F_PORT_CFG_BIT_SOURCE(priv, value)); | |
132 | clrbits_le32(&priv->mode[port], BIT(bit)); | |
133 | ||
134 | return 0; | |
135 | } | |
136 | ||
137 | static int mscc_sgpio_get_function(struct udevice *dev, unsigned int gpio) | |
138 | { | |
139 | struct mscc_sgpio_priv *priv = dev_get_priv(dev); | |
140 | u32 port = gpio % MSCC_SGPIOS_PER_BANK; | |
141 | u32 bit = gpio / MSCC_SGPIOS_PER_BANK; | |
142 | u32 val = priv->mode[port] & BIT(bit); | |
143 | ||
144 | if (val) | |
145 | return GPIOF_INPUT; | |
146 | else | |
147 | return GPIOF_OUTPUT; | |
148 | } | |
149 | ||
150 | static int mscc_sgpio_set_value(struct udevice *dev, | |
151 | unsigned int gpio, int value) | |
152 | { | |
153 | return mscc_sgpio_direction_output(dev, gpio, value); | |
154 | } | |
155 | ||
156 | static int mscc_sgpio_get_value(struct udevice *dev, unsigned int gpio) | |
157 | { | |
158 | struct mscc_sgpio_priv *priv = dev_get_priv(dev); | |
159 | u32 port = gpio % MSCC_SGPIOS_PER_BANK; | |
160 | u32 bit = gpio / MSCC_SGPIOS_PER_BANK; | |
161 | int ret; | |
162 | ||
163 | if (mscc_sgpio_get_function(dev, gpio) == GPIOF_INPUT) { | |
164 | ret = !!(sgpio_readl(priv, REG_INPUT_DATA, bit) & BIT(port)); | |
165 | } else { | |
166 | u32 portval = sgpio_readl(priv, REG_PORT_CONFIG, port); | |
167 | ||
168 | ret = MSCC_X_PORT_CFG_BIT_SOURCE(priv, portval); | |
169 | ret = !!(ret & (3 << (3 * bit))); | |
170 | } | |
171 | ||
172 | debug("get: gpio %d, port %d, bit %d, value %d\n", | |
173 | gpio, port, bit, ret); | |
174 | return ret; | |
175 | } | |
176 | ||
177 | static int mscc_sgpio_get_count(struct udevice *dev) | |
178 | { | |
179 | struct ofnode_phandle_args args; | |
180 | int count = 0, i = 0, ret; | |
181 | ||
182 | ret = dev_read_phandle_with_args(dev, "gpio-ranges", NULL, 3, i, &args); | |
183 | while (ret != -ENOENT) { | |
184 | count += args.args[2]; | |
185 | ret = dev_read_phandle_with_args(dev, "gpio-ranges", NULL, 3, | |
186 | ++i, &args); | |
187 | } | |
188 | return count; | |
189 | } | |
190 | ||
191 | static int mscc_sgpio_probe(struct udevice *dev) | |
192 | { | |
193 | struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); | |
194 | struct mscc_sgpio_priv *priv = dev_get_priv(dev); | |
195 | int err, div_clock = 0, port; | |
196 | u32 val; | |
197 | struct clk clk; | |
198 | ||
199 | err = clk_get_by_index(dev, 0, &clk); | |
200 | if (!err) { | |
201 | err = clk_get_rate(&clk); | |
202 | if (IS_ERR_VALUE(err)) { | |
203 | dev_err(dev, "Invalid clk rate\n"); | |
204 | return -EINVAL; | |
205 | } | |
206 | div_clock = err; | |
207 | } else { | |
208 | dev_err(dev, "Failed to get clock\n"); | |
209 | return err; | |
210 | } | |
211 | ||
212 | priv->props = (const struct mscc_sgpio_props *)dev_get_driver_data(dev); | |
213 | priv->ports = dev_read_u32_default(dev, "mscc,sgpio-ports", 0xFFFFFFFF); | |
214 | priv->clock = dev_read_u32_default(dev, "mscc,sgpio-frequency", | |
215 | 12500000); | |
216 | if (priv->clock <= 0 || priv->clock > div_clock) { | |
217 | dev_err(dev, "Invalid frequency %d\n", priv->clock); | |
218 | return -EINVAL; | |
219 | } | |
220 | ||
221 | uc_priv->gpio_count = mscc_sgpio_get_count(dev); | |
222 | uc_priv->gpio_count = dev_read_u32_default(dev, "ngpios", | |
223 | uc_priv->gpio_count); | |
224 | if (uc_priv->gpio_count < 1 || uc_priv->gpio_count > | |
225 | (4 * MSCC_SGPIOS_PER_BANK)) { | |
226 | dev_err(dev, "Invalid gpio count %d\n", uc_priv->gpio_count); | |
227 | return -EINVAL; | |
228 | } | |
229 | priv->bitcount = DIV_ROUND_UP(uc_priv->gpio_count, | |
230 | MSCC_SGPIOS_PER_BANK); | |
231 | debug("probe: gpios = %d, bit-count = %d\n", | |
232 | uc_priv->gpio_count, priv->bitcount); | |
233 | ||
234 | priv->regs = (u32 __iomem *)dev_read_addr(dev); | |
235 | uc_priv->bank_name = "sgpio"; | |
236 | ||
237 | sgpio_clrsetbits(priv, REG_SIO_CONFIG, 0, | |
238 | MSCC_M_CFG_SIO_PORT_WIDTH(priv), | |
239 | MSCC_F_CFG_SIO_PORT_WIDTH(priv, priv->bitcount - 1) | | |
240 | MSCC_M_CFG_SIO_AUTO_REPEAT(priv)); | |
241 | val = div_clock / priv->clock; | |
242 | debug("probe: div-clock = %d KHz, freq = %d KHz, div = %d\n", | |
243 | div_clock / 1000, priv->clock / 1000, val); | |
244 | sgpio_clrsetbits(priv, REG_SIO_CLOCK, 0, | |
245 | MSCC_M_CLOCK_SIO_CLK_FREQ(priv), | |
246 | MSCC_F_CLOCK_SIO_CLK_FREQ(priv, val)); | |
247 | ||
248 | for (port = 0; port < 32; port++) | |
249 | sgpio_writel(priv, 0, REG_PORT_CONFIG, port); | |
250 | sgpio_writel(priv, priv->ports, REG_PORT_ENABLE, 0); | |
251 | ||
252 | debug("probe: sgpio regs = %p\n", priv->regs); | |
253 | ||
254 | return 0; | |
255 | } | |
256 | ||
257 | static const struct dm_gpio_ops mscc_sgpio_ops = { | |
258 | .direction_input = mscc_sgpio_direction_input, | |
259 | .direction_output = mscc_sgpio_direction_output, | |
260 | .get_function = mscc_sgpio_get_function, | |
261 | .get_value = mscc_sgpio_get_value, | |
262 | .set_value = mscc_sgpio_set_value, | |
263 | }; | |
264 | ||
265 | static const struct udevice_id mscc_sgpio_ids[] = { | |
266 | { .compatible = "mscc,luton-sgpio", .data = (ulong)&props_luton }, | |
267 | { .compatible = "mscc,ocelot-sgpio", .data = (ulong)&props_ocelot }, | |
268 | { } | |
269 | }; | |
270 | ||
271 | U_BOOT_DRIVER(gpio_mscc_sgpio) = { | |
272 | .name = "mscc-sgpio", | |
273 | .id = UCLASS_GPIO, | |
274 | .of_match = mscc_sgpio_ids, | |
275 | .ops = &mscc_sgpio_ops, | |
276 | .probe = mscc_sgpio_probe, | |
277 | .priv_auto_alloc_size = sizeof(struct mscc_sgpio_priv), | |
278 | }; |