[J-u-boot.git] / include / configs / SBx81LIFXCAT.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
 */

#ifndef _CONFIG_SBX81LIFXCAT_H
#define _CONFIG_SBX81LIFXCAT_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
#define CONFIG_KW88F6281	1	/* SOC Name */
#define CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg

/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE	0x00000000

#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
#define CONFIG_KIRKWOOD_PCIE_INIT	/* Enable PCIE Port0 */
#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
#define CONFIG_KIRKWOOD_GPIO	1

/*
 * NS16550 Configuration
 */
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE

/*
 * Serial Port configuration
 * The following definitions let you select what serial you want to use
 * for your console driver.
 */

#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
#define MTDPARTS_MTDOOPS "errlog"

/*
 *  Environment variables configurations
 */

/*
 * U-Boot bootcode configuration
 */

#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for monitor */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/

/* size in bytes reserved for initial data */

#include <asm/arch/config.h>
/* There is no PHY directly connected so don't ask it for link status */
#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable a single port */
#define CONFIG_PHY_BASE_ADR	0x01
#endif /* CONFIG_CMD_NET */

#endif /* _CONFIG_SBX81LIFXCAT_H */
Commit	Line	Data
a6477f7c CP	1	/* SPDX-License-Identifier: GPL-2.0+ */
	2	/*
	3	* (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz>
	4	*/
	5
	6	#ifndef _CONFIG_SBX81LIFXCAT_H
	7	#define _CONFIG_SBX81LIFXCAT_H
	8
	9	/*
	10	* High Level Configuration Options (easy to change)
	11	*/
	12	#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
	13	#define CONFIG_KW88F6281 1 /* SOC Name */
a6477f7c	14	#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
a6477f7c CP	15
	16	/* additions for new ARM relocation support */
	17	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	18
a6477f7c CP	19	#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
	20	#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */
	21	#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
	22	#define CONFIG_KIRKWOOD_GPIO 1
	23
a6477f7c CP	24	/*
	25	* NS16550 Configuration
	26	*/
a6477f7c CP	27	#define CONFIG_SYS_NS16550_SERIAL
	28	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	29	#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
	30	#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
	31
	32	/*
	33	* Serial Port configuration
	34	* The following definitions let you select what serial you want to use
	35	* for your console driver.
	36	*/
	37
a6477f7c CP	38	#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)"
a6477f7c CP	39	#define MTDPARTS_MTDOOPS "errlog"
a6477f7c CP	40
	41	/*
	42	* Environment variables configurations
	43	*/
a6477f7c CP	44
	45	/*
	46	* U-Boot bootcode configuration
	47	*/
	48
	49	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */
a6477f7c CP	50
	51	/*
	52	* For booting Linux, the board info and command line data
	53	* have to be in the first 8 MB of memory, since this is
	54	* the maximum mapped by the Linux kernel during initialization.
	55	*/
	56	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
	57
	58	/* size in bytes reserved for initial data */
	59
	60	#include <asm/arch/config.h>
	61	/* There is no PHY directly connected so don't ask it for link status */
	62	#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	63
a6477f7c CP	64	/*
	65	* Ethernet Driver configuration
	66	*/
	67	#ifdef CONFIG_CMD_NET
a6477f7c CP	68	#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */
a6477f7c CP	69	#define CONFIG_PHY_BASE_ADR 0x01
a6477f7c CP	70	#endif /* CONFIG_CMD_NET */
a6477f7c CP	71
a6477f7c	72	#endif /* _CONFIG_SBX81LIFXCAT_H */