projects / J-u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 87a62bce CP |
1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
| 2 | /* | |
| 3 | * (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz> | |
| 4 | */ | |
| 5 | ||
| 6 | #ifndef _CONFIG_SBX81LIFKW_H | |
| 7 | #define _CONFIG_SBX81LIFKW_H | |
| 8 | ||
| 9 | /* | |
| 10 | * High Level Configuration Options (easy to change) | |
| 11 | */ | |
| 12 | #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ | |
| 13 | #define CONFIG_KW88F6281 1 /* SOC Name */ | |
| 87a62bce | 14 | #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg |
| 87a62bce CP |
15 | |
| 16 | /* additions for new ARM relocation support */ | |
| 17 | #define CONFIG_SYS_SDRAM_BASE 0x00000000 | |
| 18 | ||
| 87a62bce CP |
19 | #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ |
| 20 | #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ | |
| 21 | #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ | |
| 22 | #define CONFIG_KIRKWOOD_GPIO 1 | |
| 23 | ||
| 87a62bce CP |
24 | /* |
| 25 | * NS16550 Configuration | |
| 26 | */ | |
| 87a62bce CP |
27 | #define CONFIG_SYS_NS16550_SERIAL |
| 28 | #define CONFIG_SYS_NS16550_REG_SIZE (-4) | |
| 29 | #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK | |
| 30 | #define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE | |
| 31 | ||
| 32 | /* | |
| 33 | * Serial Port configuration | |
| 34 | * The following definitions let you select what serial you want to use | |
| 35 | * for your console driver. | |
| 36 | */ | |
| 37 | ||
| 87a62bce CP |
38 | #define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)" |
| 39 | #define MTDPARTS_MTDOOPS "errlog" | |
| 87a62bce CP |
40 | |
| 41 | /* | |
| 42 | * Environment variables configurations | |
| 43 | */ | |
| 87a62bce CP |
44 | |
| 45 | /* | |
| 46 | * U-Boot bootcode configuration | |
| 47 | */ | |
| 48 | ||
| 49 | #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */ | |
| 87a62bce | 50 | |
| 87a62bce CP |
51 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ |
| 52 | ||
| 53 | /* size in bytes reserved for initial data */ | |
| 54 | ||
| 55 | #include <asm/arch/config.h> | |
| 56 | /* There is no PHY directly connected so don't ask it for link status */ | |
| 57 | #undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN | |
| 58 | ||
| 87a62bce CP |
59 | /* |
| 60 | * Ethernet Driver configuration | |
| 61 | */ | |
| 62 | #ifdef CONFIG_CMD_NET | |
| 87a62bce CP |
63 | #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ |
| 64 | #define CONFIG_PHY_BASE_ADR 0x01 | |
| 87a62bce CP |
65 | #endif /* CONFIG_CMD_NET */ |
| 66 | ||
| 87a62bce | 67 | #endif /* _CONFIG_SBX81LIFKW_H */ |