[J-u-boot.git] / arch / arm / dts / sunxi-h3-h5-emlid-neutis.dtsi

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
 * DTSI for Emlid Neutis SoMs.
 *
 * Copyright (C) 2019 Georgii Staroselskii <[email protected]>
 */

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {
	aliases {
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	wifi_pwrseq: wifi_pwrseq {
		compatible = "mmc-pwrseq-simple";
		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
		post-power-on-delay-ms = <200>;
		clocks = <&rtc 1>;
		clock-names = "ext_clock";
	};
};

&cpu0 {
	cpu-supply = <&vdd_cpux>;
};

&reg_usb0_vbus {
	gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
	status = "okay";
};


&de {
	status = "okay";
};

&ohci0 {
	status = "okay";
};

&ohci1 {
	status = "okay";
};

&ohci2 {
	status = "okay";
};

&ohci3 {
	status = "okay";
};


&ehci0 {
	status = "okay";
};

&ehci1 {
	status = "okay";
};

&ehci2 {
	status = "okay";
};

&ehci3 {
	status = "okay";
};

&mmc0 {
	vmmc-supply = <&reg_vcc3v3>;
	bus-width = <4>;
	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
	status = "okay";
};


&mmc1 {
	vmmc-supply = <&reg_vcc3v3>;
	vqmmc-supply = <&reg_vcc3v3>;
	mmc-pwrseq = <&wifi_pwrseq>;
	bus-width = <4>;
	non-removable;
	status = "okay";

	brcmf: wifi@1 {
		reg = <1>;
		compatible = "brcm,bcm4329-fmac";
		interrupt-parent = <&r_pio>;
		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
		interrupt-names = "host-wake";
	};
};

&mmc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_8bit_pins>;
	vmmc-supply = <&reg_vcc3v3>;
	bus-width = <8>;
	non-removable;
	cap-mmc-hw-reset;
	status = "okay";
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pa_pins>;
	status = "okay";
};


&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
	uart-has-rtscts;
	status = "okay";

	bluetooth {
		compatible = "brcm,bcm43438-bt";
		clocks = <&rtc 1>;
		clock-names = "lpo";
		vbat-supply = <&reg_vcc3v3>;
		vddio-supply = <&reg_vcc3v3>;
		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
	};
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart2_pins>;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pins>;
	status = "okay";
};

&usbphy {
	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
	usb0_vbus-supply = <&reg_usb0_vbus>;
	status = "okay";
};

&usb_otg {
	dr_mode = "otg";
	status = "okay";
};

&codec {
	allwinner,audio-routing =
		"Line Out", "LINEOUT",
		"LINEIN", "Line In",
		"MIC1", "Mic",
		"MIC2", "Mic",
		"Mic",  "MBIAS";
};

&i2c0 {
	status = "okay";
};
Commit	Line	Data
b5fe523b CYT	1	// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
	2	/*
	3	* DTSI for Emlid Neutis SoMs.
	4	*
	5	* Copyright (C) 2019 Georgii Staroselskii <[email protected]>
	6	*/
	7
	8	#include "sunxi-common-regulators.dtsi"
	9
	10	#include <dt-bindings/gpio/gpio.h>
	11
	12	/ {
	13	aliases {
	14	serial0 = &uart0;
	15	};
	16
	17	chosen {
	18	stdout-path = "serial0:115200n8";
	19	};
	20
	21	wifi_pwrseq: wifi_pwrseq {
	22	compatible = "mmc-pwrseq-simple";
	23	reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
	24	post-power-on-delay-ms = <200>;
	25	clocks = <&rtc 1>;
	26	clock-names = "ext_clock";
	27	};
	28	};
	29
	30	&cpu0 {
	31	cpu-supply = <&vdd_cpux>;
	32	};
	33
	34	&reg_usb0_vbus {
	35	gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
	36	status = "okay";
	37	};
	38
	39
	40	&de {
	41	status = "okay";
	42	};
	43
	44	&ohci0 {
	45	status = "okay";
	46	};
	47
	48	&ohci1 {
	49	status = "okay";
	50	};
	51
	52	&ohci2 {
	53	status = "okay";
	54	};
	55
	56	&ohci3 {
	57	status = "okay";
	58	};
	59
	60
	61	&ehci0 {
	62	status = "okay";
	63	};
	64
65	&ehci1 {
66	status = "okay";
67	};
68
69	&ehci2 {
70	status = "okay";
71	};
72
73	&ehci3 {
74	status = "okay";
75	};
76
77	&mmc0 {
78	vmmc-supply = <&reg_vcc3v3>;
79	bus-width = <4>;
80	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
81	status = "okay";
82	};
83
84
85	&mmc1 {
86	vmmc-supply = <&reg_vcc3v3>;
87	vqmmc-supply = <&reg_vcc3v3>;
88	mmc-pwrseq = <&wifi_pwrseq>;
89	bus-width = <4>;
90	non-removable;
91	status = "okay";
92
93	brcmf: wifi@1 {
94	reg = <1>;
95	compatible = "brcm,bcm4329-fmac";
96	interrupt-parent = <&r_pio>;
97	interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
98	interrupt-names = "host-wake";
99	};
100	};
101
102	&mmc2 {
103	pinctrl-names = "default";
104	pinctrl-0 = <&mmc2_8bit_pins>;
105	vmmc-supply = <&reg_vcc3v3>;
106	bus-width = <8>;
107	non-removable;
108	cap-mmc-hw-reset;
109	status = "okay";
110	};
111
112	&uart0 {
113	pinctrl-names = "default";
114	pinctrl-0 = <&uart0_pa_pins>;
115	status = "okay";
116	};
117
118
119	&uart1 {
120	pinctrl-names = "default";
121	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
122	uart-has-rtscts;
123	status = "okay";
124
125	bluetooth {
126	compatible = "brcm,bcm43438-bt";
127	clocks = <&rtc 1>;
128	clock-names = "lpo";
129	vbat-supply = <&reg_vcc3v3>;
130	vddio-supply = <&reg_vcc3v3>;
131	shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
132	device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
133	};
134	};
135
136	&uart2 {
137	pinctrl-names = "default";
138	pinctrl-0 = <&uart2_pins>;
139	status = "okay";
140	};
141
142	&uart3 {
143	pinctrl-names = "default";
144	pinctrl-0 = <&uart3_pins>;
145	status = "okay";
146	};
147
148	&usbphy {
149	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
150	usb0_vbus-supply = <&reg_usb0_vbus>;
151	status = "okay";
152	};
153
154	&usb_otg {
155	dr_mode = "otg";
156	status = "okay";
157	};
158
159	&codec {
160	allwinner,audio-routing =
161	"Line Out", "LINEOUT",
162	"LINEIN", "Line In",
163	"MIC1", "Mic",
164	"MIC2", "Mic",
165	"Mic", "MBIAS";
166	};
167
168	&i2c0 {
169	status = "okay";
170	};