[J-u-boot.git] / doc / README.sh7753evb

========================================
Renesas SH7753 EVB board
========================================

This board specification:
=========================

The SH7753 EVB (board config name:sh7753evb) has the following device:

 - SH7753 (SH-4A)
 - DDR3-SDRAM 512MB
 - SPI ROM 8MB
 - Gigabit Ethernet controllers
 - eMMC 4GB


Configuration for This board:
=============================

You can select the configuration as follows:

 - make sh7753evb_config


This board specific command:
============================

This board has the following its specific command:

 - write_mac


1. write_mac

You can write MAC address to SPI ROM.

 Usage 1) Write MAC address

   write_mac [GETHERC ch0] [GETHERC ch1]

	For example)
	 => write_mac 74:90:50:00:33:9e 74:90:50:00:33:9f
		*) We have to input the command as a single line
		   (without carriage return)
		*) We have to reset after input the command.

 Usage 2) Show current data

   write_mac

	For example)
		=> write_mac
		GETHERC ch0 = 74:90:50:00:33:9e
		GETHERC ch1 = 74:90:50:00:33:9f


Update SPI ROM:
============================

1. Copy u-boot image to RAM area.
2. Probe SPI device.
   => sf probe 0
   SF: Detected MX25L6405D with page size 64KiB, total 8 MiB
3. Erase SPI ROM.
   => sf erase 0 80000
4. Write u-boot image to SPI ROM.
   => sf write 0x48000000 0 80000
Commit	Line	Data
320cf350 YS	1	========================================
	2	Renesas SH7753 EVB board
	3	========================================
	4
	5	This board specification:
	6	=========================
	7
	8	The SH7753 EVB (board config name:sh7753evb) has the following device:
	9
	10	- SH7753 (SH-4A)
	11	- DDR3-SDRAM 512MB
	12	- SPI ROM 8MB
	13	- Gigabit Ethernet controllers
	14	- eMMC 4GB
	15
	16
	17	Configuration for This board:
	18	=============================
	19
	20	You can select the configuration as follows:
	21
	22	- make sh7753evb_config
	23
	24
	25	This board specific command:
	26	============================
	27
	28	This board has the following its specific command:
	29
	30	- write_mac
	31
	32
	33	1. write_mac
	34
	35	You can write MAC address to SPI ROM.
	36
	37	Usage 1) Write MAC address
	38
	39	write_mac [GETHERC ch0] [GETHERC ch1]
	40
	41	For example)
	42	=> write_mac 74:90:50:00:33:9e 74:90:50:00:33:9f
	43	*) We have to input the command as a single line
	44	(without carriage return)
	45	*) We have to reset after input the command.
	46
	47	Usage 2) Show current data
	48
	49	write_mac
	50
	51	For example)
	52	=> write_mac
	53	GETHERC ch0 = 74:90:50:00:33:9e
	54	GETHERC ch1 = 74:90:50:00:33:9f
	55
	56
	57	Update SPI ROM:
	58	============================
	59
	60	1. Copy u-boot image to RAM area.
	61	2. Probe SPI device.
	62	=> sf probe 0
	63	SF: Detected MX25L6405D with page size 64KiB, total 8 MiB
	64	3. Erase SPI ROM.
65	=> sf erase 0 80000
66	4. Write u-boot image to SPI ROM.
67	=> sf write 0x48000000 0 80000