]>
Commit | Line | Data |
---|---|---|
e887afc9 WD |
1 | /* |
2 | * (C) Copyright 2001 | |
3 | * Denis Peter, MPL AG Switzerland | |
4 | * | |
1a459660 | 5 | * SPDX-License-Identifier: GPL-2.0+ |
e887afc9 WD |
6 | */ |
7 | ||
8 | /* | |
9 | * SCSI support. | |
10 | */ | |
e887afc9 WD |
11 | #include <common.h> |
12 | #include <command.h> | |
f3609473 | 13 | #include <inttypes.h> |
e887afc9 WD |
14 | #include <asm/processor.h> |
15 | #include <scsi.h> | |
16 | #include <image.h> | |
e887afc9 WD |
17 | #include <pci.h> |
18 | ||
4ae5eb7c VB |
19 | #ifdef CONFIG_SCSI_DEV_LIST |
20 | #define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST | |
21 | #else | |
e887afc9 WD |
22 | #ifdef CONFIG_SCSI_SYM53C8XX |
23 | #define SCSI_VEND_ID 0x1000 | |
24 | #ifndef CONFIG_SCSI_DEV_ID | |
25 | #define SCSI_DEV_ID 0x0001 | |
26 | #else | |
27 | #define SCSI_DEV_ID CONFIG_SCSI_DEV_ID | |
28 | #endif | |
4782ac80 JZ |
29 | #elif defined CONFIG_SATA_ULI5288 |
30 | ||
31 | #define SCSI_VEND_ID 0x10b9 | |
32 | #define SCSI_DEV_ID 0x5288 | |
33 | ||
942e3143 | 34 | #elif !defined(CONFIG_SCSI_AHCI_PLAT) |
4782ac80 | 35 | #error no scsi device defined |
e887afc9 | 36 | #endif |
4ae5eb7c VB |
37 | #define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} |
38 | #endif | |
e887afc9 | 39 | |
1a1cf6ee | 40 | #if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) |
4ae5eb7c VB |
41 | const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST }; |
42 | #endif | |
e887afc9 WD |
43 | static ccb tempccb; /* temporary scsi command buffer */ |
44 | ||
45 | static unsigned char tempbuff[512]; /* temporary data buffer */ | |
46 | ||
47 | static int scsi_max_devs; /* number of highest available scsi device */ | |
48 | ||
49 | static int scsi_curr_dev; /* current device */ | |
50 | ||
6d0f6bcf | 51 | static block_dev_desc_t scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; |
e887afc9 WD |
52 | |
53 | /******************************************************************************** | |
54 | * forward declerations of some Setup Routines | |
55 | */ | |
56 | void scsi_setup_test_unit_ready(ccb * pccb); | |
35df8931 ML |
57 | void scsi_setup_read6(ccb * pccb, lbaint_t start, unsigned short blocks); |
58 | void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks); | |
2b42c931 ML |
59 | void scsi_setup_read16(ccb * pccb, lbaint_t start, unsigned long blocks); |
60 | ||
35df8931 ML |
61 | static void scsi_setup_write_ext(ccb *pccb, lbaint_t start, |
62 | unsigned short blocks); | |
e887afc9 WD |
63 | void scsi_setup_inquiry(ccb * pccb); |
64 | void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); | |
65 | ||
66 | ||
b4c5bbce GB |
67 | static int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, |
68 | unsigned long *blksz); | |
4f6aa346 SG |
69 | static ulong scsi_read(int device, lbaint_t blknr, lbaint_t blkcnt, |
70 | void *buffer); | |
71 | static ulong scsi_write(int device, lbaint_t blknr, | |
758c9e69 | 72 | lbaint_t blkcnt, const void *buffer); |
e887afc9 WD |
73 | |
74 | ||
75 | /********************************************************************************* | |
76 | * (re)-scan the scsi bus and reports scsi device info | |
77 | * to the user if mode = 1 | |
78 | */ | |
79 | void scsi_scan(int mode) | |
80 | { | |
81 | unsigned char i,perq,modi,lun; | |
b4c5bbce GB |
82 | lbaint_t capacity; |
83 | unsigned long blksz; | |
e887afc9 WD |
84 | ccb* pccb=(ccb *)&tempccb; |
85 | ||
86 | if(mode==1) { | |
87 | printf("scanning bus for devices...\n"); | |
88 | } | |
6d0f6bcf | 89 | for(i=0;i<CONFIG_SYS_SCSI_MAX_DEVICE;i++) { |
e887afc9 WD |
90 | scsi_dev_desc[i].target=0xff; |
91 | scsi_dev_desc[i].lun=0xff; | |
92 | scsi_dev_desc[i].lba=0; | |
93 | scsi_dev_desc[i].blksz=0; | |
0472fbfd EE |
94 | scsi_dev_desc[i].log2blksz = |
95 | LOG2_INVALID(typeof(scsi_dev_desc[i].log2blksz)); | |
e887afc9 WD |
96 | scsi_dev_desc[i].type=DEV_TYPE_UNKNOWN; |
97 | scsi_dev_desc[i].vendor[0]=0; | |
98 | scsi_dev_desc[i].product[0]=0; | |
99 | scsi_dev_desc[i].revision[0]=0; | |
472d5460 | 100 | scsi_dev_desc[i].removable = false; |
e887afc9 WD |
101 | scsi_dev_desc[i].if_type=IF_TYPE_SCSI; |
102 | scsi_dev_desc[i].dev=i; | |
103 | scsi_dev_desc[i].part_type=PART_TYPE_UNKNOWN; | |
104 | scsi_dev_desc[i].block_read=scsi_read; | |
758c9e69 | 105 | scsi_dev_desc[i].block_write = scsi_write; |
e887afc9 WD |
106 | } |
107 | scsi_max_devs=0; | |
6d0f6bcf | 108 | for(i=0;i<CONFIG_SYS_SCSI_MAX_SCSI_ID;i++) { |
e887afc9 | 109 | pccb->target=i; |
6d0f6bcf | 110 | for(lun=0;lun<CONFIG_SYS_SCSI_MAX_LUN;lun++) { |
e887afc9 WD |
111 | pccb->lun=lun; |
112 | pccb->pdata=(unsigned char *)&tempbuff; | |
113 | pccb->datalen=512; | |
114 | scsi_setup_inquiry(pccb); | |
472d5460 | 115 | if (scsi_exec(pccb) != true) { |
e887afc9 | 116 | if(pccb->contr_stat==SCSI_SEL_TIME_OUT) { |
1a344f29 | 117 | debug ("Selection timeout ID %d\n",pccb->target); |
e887afc9 WD |
118 | continue; /* selection timeout => assuming no device present */ |
119 | } | |
120 | scsi_print_error(pccb); | |
121 | continue; | |
122 | } | |
123 | perq=tempbuff[0]; | |
124 | modi=tempbuff[1]; | |
125 | if((perq & 0x1f)==0x1f) { | |
126 | continue; /* skip unknown devices */ | |
127 | } | |
128 | if((modi&0x80)==0x80) /* drive is removable */ | |
472d5460 | 129 | scsi_dev_desc[scsi_max_devs].removable=true; |
e887afc9 | 130 | /* get info for this device */ |
2309c130 SR |
131 | scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].vendor[0], |
132 | &tempbuff[8], 8); | |
133 | scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].product[0], | |
134 | &tempbuff[16], 16); | |
135 | scsi_ident_cpy((unsigned char *)&scsi_dev_desc[scsi_max_devs].revision[0], | |
136 | &tempbuff[32], 4); | |
e887afc9 WD |
137 | scsi_dev_desc[scsi_max_devs].target=pccb->target; |
138 | scsi_dev_desc[scsi_max_devs].lun=pccb->lun; | |
139 | ||
140 | pccb->datalen=0; | |
141 | scsi_setup_test_unit_ready(pccb); | |
472d5460 YS |
142 | if (scsi_exec(pccb) != true) { |
143 | if (scsi_dev_desc[scsi_max_devs].removable == true) { | |
e887afc9 WD |
144 | scsi_dev_desc[scsi_max_devs].type=perq; |
145 | goto removable; | |
146 | } | |
147 | scsi_print_error(pccb); | |
148 | continue; | |
149 | } | |
b4c5bbce | 150 | if (scsi_read_capacity(pccb, &capacity, &blksz)) { |
e887afc9 WD |
151 | scsi_print_error(pccb); |
152 | continue; | |
153 | } | |
e887afc9 WD |
154 | scsi_dev_desc[scsi_max_devs].lba=capacity; |
155 | scsi_dev_desc[scsi_max_devs].blksz=blksz; | |
0472fbfd EE |
156 | scsi_dev_desc[scsi_max_devs].log2blksz = |
157 | LOG2(scsi_dev_desc[scsi_max_devs].blksz); | |
e887afc9 WD |
158 | scsi_dev_desc[scsi_max_devs].type=perq; |
159 | init_part(&scsi_dev_desc[scsi_max_devs]); | |
160 | removable: | |
161 | if(mode==1) { | |
162 | printf (" Device %d: ", scsi_max_devs); | |
163 | dev_print(&scsi_dev_desc[scsi_max_devs]); | |
164 | } /* if mode */ | |
165 | scsi_max_devs++; | |
166 | } /* next LUN */ | |
167 | } | |
168 | if(scsi_max_devs>0) | |
169 | scsi_curr_dev=0; | |
170 | else | |
d0ff51ba | 171 | scsi_curr_dev = -1; |
447c031b SR |
172 | |
173 | printf("Found %d device(s).\n", scsi_max_devs); | |
fff40a7e | 174 | #ifndef CONFIG_SPL_BUILD |
447c031b | 175 | setenv_ulong("scsidevs", scsi_max_devs); |
fff40a7e | 176 | #endif |
447c031b SR |
177 | } |
178 | ||
179 | int scsi_get_disk_count(void) | |
180 | { | |
181 | return scsi_max_devs; | |
e887afc9 WD |
182 | } |
183 | ||
1a1cf6ee | 184 | #if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT) |
e887afc9 WD |
185 | void scsi_init(void) |
186 | { | |
187 | int busdevfunc; | |
4ae5eb7c VB |
188 | int i; |
189 | /* | |
190 | * Find a device from the list, this driver will support a single | |
191 | * controller. | |
192 | */ | |
193 | for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { | |
194 | /* get PCI Device ID */ | |
195 | busdevfunc = pci_find_device(scsi_device_list[i].vendor, | |
196 | scsi_device_list[i].device, | |
197 | 0); | |
198 | if (busdevfunc != -1) | |
199 | break; | |
200 | } | |
e887afc9 | 201 | |
4ae5eb7c VB |
202 | if (busdevfunc == -1) { |
203 | printf("Error: SCSI Controller(s) "); | |
204 | for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { | |
205 | printf("%04X:%04X ", | |
206 | scsi_device_list[i].vendor, | |
207 | scsi_device_list[i].device); | |
208 | } | |
209 | printf("not found\n"); | |
e887afc9 WD |
210 | return; |
211 | } | |
212 | #ifdef DEBUG | |
213 | else { | |
4ae5eb7c VB |
214 | printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n", |
215 | scsi_device_list[i].vendor, | |
216 | scsi_device_list[i].device, | |
217 | (busdevfunc >> 16) & 0xFF, | |
218 | (busdevfunc >> 11) & 0x1F, | |
219 | (busdevfunc >> 8) & 0x7); | |
e887afc9 WD |
220 | } |
221 | #endif | |
abbdb262 | 222 | bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci"); |
e887afc9 WD |
223 | scsi_low_level_init(busdevfunc); |
224 | scsi_scan(1); | |
abbdb262 | 225 | bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI); |
e887afc9 | 226 | } |
942e3143 | 227 | #endif |
e887afc9 | 228 | |
df3fc526 | 229 | #ifdef CONFIG_PARTITIONS |
e887afc9 WD |
230 | block_dev_desc_t * scsi_get_dev(int dev) |
231 | { | |
6d0f6bcf | 232 | return (dev < CONFIG_SYS_SCSI_MAX_DEVICE) ? &scsi_dev_desc[dev] : NULL; |
e887afc9 | 233 | } |
df3fc526 | 234 | #endif |
e887afc9 | 235 | |
e887afc9 WD |
236 | /****************************************************************************** |
237 | * scsi boot command intepreter. Derived from diskboot | |
238 | */ | |
54841ab5 | 239 | int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
e887afc9 | 240 | { |
7405a133 | 241 | return common_diskboot(cmdtp, "scsi", argc, argv); |
e887afc9 WD |
242 | } |
243 | ||
244 | /********************************************************************************* | |
245 | * scsi command intepreter | |
246 | */ | |
54841ab5 | 247 | int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
e887afc9 WD |
248 | { |
249 | switch (argc) { | |
4c12eeb8 SG |
250 | case 0: |
251 | case 1: | |
252 | return CMD_RET_USAGE; | |
47e26b1b | 253 | |
4c12eeb8 | 254 | case 2: |
e887afc9 WD |
255 | if (strncmp(argv[1],"res",3) == 0) { |
256 | printf("\nReset SCSI\n"); | |
257 | scsi_bus_reset(); | |
258 | scsi_scan(1); | |
259 | return 0; | |
260 | } | |
261 | if (strncmp(argv[1],"inf",3) == 0) { | |
262 | int i; | |
6d0f6bcf | 263 | for (i=0; i<CONFIG_SYS_SCSI_MAX_DEVICE; ++i) { |
e887afc9 WD |
264 | if(scsi_dev_desc[i].type==DEV_TYPE_UNKNOWN) |
265 | continue; /* list only known devices */ | |
266 | printf ("SCSI dev. %d: ", i); | |
267 | dev_print(&scsi_dev_desc[i]); | |
268 | } | |
269 | return 0; | |
270 | } | |
271 | if (strncmp(argv[1],"dev",3) == 0) { | |
6d0f6bcf | 272 | if ((scsi_curr_dev < 0) || (scsi_curr_dev >= CONFIG_SYS_SCSI_MAX_DEVICE)) { |
e887afc9 WD |
273 | printf("\nno SCSI devices available\n"); |
274 | return 1; | |
275 | } | |
276 | printf ("\n Device %d: ", scsi_curr_dev); | |
277 | dev_print(&scsi_dev_desc[scsi_curr_dev]); | |
278 | return 0; | |
279 | } | |
280 | if (strncmp(argv[1],"scan",4) == 0) { | |
281 | scsi_scan(1); | |
282 | return 0; | |
283 | } | |
284 | if (strncmp(argv[1],"part",4) == 0) { | |
285 | int dev, ok; | |
6d0f6bcf | 286 | for (ok=0, dev=0; dev<CONFIG_SYS_SCSI_MAX_DEVICE; ++dev) { |
e887afc9 WD |
287 | if (scsi_dev_desc[dev].type!=DEV_TYPE_UNKNOWN) { |
288 | ok++; | |
289 | if (dev) | |
290 | printf("\n"); | |
1a344f29 | 291 | debug ("print_part of %x\n",dev); |
e887afc9 WD |
292 | print_part(&scsi_dev_desc[dev]); |
293 | } | |
294 | } | |
295 | if (!ok) | |
296 | printf("\nno SCSI devices available\n"); | |
297 | return 1; | |
298 | } | |
4c12eeb8 | 299 | return CMD_RET_USAGE; |
53677ef1 | 300 | case 3: |
e887afc9 WD |
301 | if (strncmp(argv[1],"dev",3) == 0) { |
302 | int dev = (int)simple_strtoul(argv[2], NULL, 10); | |
303 | printf ("\nSCSI device %d: ", dev); | |
6d0f6bcf | 304 | if (dev >= CONFIG_SYS_SCSI_MAX_DEVICE) { |
e887afc9 WD |
305 | printf("unknown device\n"); |
306 | return 1; | |
307 | } | |
308 | printf ("\n Device %d: ", dev); | |
309 | dev_print(&scsi_dev_desc[dev]); | |
310 | if(scsi_dev_desc[dev].type == DEV_TYPE_UNKNOWN) { | |
311 | return 1; | |
312 | } | |
313 | scsi_curr_dev = dev; | |
314 | printf("... is now current device\n"); | |
315 | return 0; | |
316 | } | |
317 | if (strncmp(argv[1],"part",4) == 0) { | |
318 | int dev = (int)simple_strtoul(argv[2], NULL, 10); | |
319 | if(scsi_dev_desc[dev].type != DEV_TYPE_UNKNOWN) { | |
320 | print_part(&scsi_dev_desc[dev]); | |
321 | } | |
322 | else { | |
323 | printf ("\nSCSI device %d not available\n", dev); | |
324 | } | |
325 | return 1; | |
326 | } | |
4c12eeb8 | 327 | return CMD_RET_USAGE; |
e887afc9 WD |
328 | default: |
329 | /* at least 4 args */ | |
330 | if (strcmp(argv[1],"read") == 0) { | |
331 | ulong addr = simple_strtoul(argv[2], NULL, 16); | |
332 | ulong blk = simple_strtoul(argv[3], NULL, 16); | |
333 | ulong cnt = simple_strtoul(argv[4], NULL, 16); | |
334 | ulong n; | |
335 | printf ("\nSCSI read: device %d block # %ld, count %ld ... ", | |
336 | scsi_curr_dev, blk, cnt); | |
337 | n = scsi_read(scsi_curr_dev, blk, cnt, (ulong *)addr); | |
338 | printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR"); | |
339 | return 0; | |
758c9e69 HTL |
340 | } else if (strcmp(argv[1], "write") == 0) { |
341 | ulong addr = simple_strtoul(argv[2], NULL, 16); | |
342 | ulong blk = simple_strtoul(argv[3], NULL, 16); | |
343 | ulong cnt = simple_strtoul(argv[4], NULL, 16); | |
344 | ulong n; | |
345 | printf("\nSCSI write: device %d block # %ld, " | |
346 | "count %ld ... ", | |
347 | scsi_curr_dev, blk, cnt); | |
348 | n = scsi_write(scsi_curr_dev, blk, cnt, | |
349 | (ulong *)addr); | |
350 | printf("%ld blocks written: %s\n", n, | |
351 | (n == cnt) ? "OK" : "ERROR"); | |
352 | return 0; | |
e887afc9 WD |
353 | } |
354 | } /* switch */ | |
4c12eeb8 | 355 | return CMD_RET_USAGE; |
e887afc9 WD |
356 | } |
357 | ||
358 | /**************************************************************************************** | |
359 | * scsi_read | |
360 | */ | |
361 | ||
2b42c931 ML |
362 | /* almost the maximum amount of the scsi_ext command.. */ |
363 | #define SCSI_MAX_READ_BLK 0xFFFF | |
364 | #define SCSI_LBA48_READ 0xFFFFFFF | |
e887afc9 | 365 | |
4f6aa346 SG |
366 | static ulong scsi_read(int device, lbaint_t blknr, lbaint_t blkcnt, |
367 | void *buffer) | |
e887afc9 | 368 | { |
758c9e69 HTL |
369 | lbaint_t start, blks; |
370 | uintptr_t buf_addr; | |
c7d0fd79 | 371 | unsigned short smallblks = 0; |
e887afc9 WD |
372 | ccb* pccb=(ccb *)&tempccb; |
373 | device&=0xff; | |
374 | /* Setup device | |
375 | */ | |
376 | pccb->target=scsi_dev_desc[device].target; | |
377 | pccb->lun=scsi_dev_desc[device].lun; | |
378 | buf_addr=(unsigned long)buffer; | |
379 | start=blknr; | |
380 | blks=blkcnt; | |
758c9e69 HTL |
381 | debug("\nscsi_read: dev %d startblk " LBAF |
382 | ", blccnt " LBAF " buffer %lx\n", | |
383 | device, start, blks, (unsigned long)buffer); | |
e887afc9 WD |
384 | do { |
385 | pccb->pdata=(unsigned char *)buf_addr; | |
2b42c931 ML |
386 | #ifdef CONFIG_SYS_64BIT_LBA |
387 | if (start > SCSI_LBA48_READ) { | |
388 | unsigned long blocks; | |
389 | blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK); | |
390 | pccb->datalen = scsi_dev_desc[device].blksz * blocks; | |
391 | scsi_setup_read16(pccb, start, blocks); | |
392 | start += blocks; | |
393 | blks -= blocks; | |
c7d0fd79 | 394 | } else |
2b42c931 ML |
395 | #endif |
396 | if (blks > SCSI_MAX_READ_BLK) { | |
e887afc9 WD |
397 | pccb->datalen=scsi_dev_desc[device].blksz * SCSI_MAX_READ_BLK; |
398 | smallblks=SCSI_MAX_READ_BLK; | |
399 | scsi_setup_read_ext(pccb,start,smallblks); | |
400 | start+=SCSI_MAX_READ_BLK; | |
401 | blks-=SCSI_MAX_READ_BLK; | |
402 | } | |
403 | else { | |
404 | pccb->datalen=scsi_dev_desc[device].blksz * blks; | |
405 | smallblks=(unsigned short) blks; | |
406 | scsi_setup_read_ext(pccb,start,smallblks); | |
407 | start+=blks; | |
408 | blks=0; | |
409 | } | |
758c9e69 | 410 | debug("scsi_read_ext: startblk " LBAF |
f3609473 | 411 | ", blccnt %x buffer %" PRIXPTR "\n", |
758c9e69 | 412 | start, smallblks, buf_addr); |
472d5460 | 413 | if (scsi_exec(pccb) != true) { |
e887afc9 WD |
414 | scsi_print_error(pccb); |
415 | blkcnt-=blks; | |
416 | break; | |
417 | } | |
418 | buf_addr+=pccb->datalen; | |
419 | } while(blks!=0); | |
758c9e69 | 420 | debug("scsi_read_ext: end startblk " LBAF |
f3609473 | 421 | ", blccnt %x buffer %" PRIXPTR "\n", start, smallblks, buf_addr); |
e887afc9 WD |
422 | return(blkcnt); |
423 | } | |
424 | ||
758c9e69 HTL |
425 | /******************************************************************************* |
426 | * scsi_write | |
427 | */ | |
428 | ||
429 | /* Almost the maximum amount of the scsi_ext command.. */ | |
430 | #define SCSI_MAX_WRITE_BLK 0xFFFF | |
431 | ||
4f6aa346 | 432 | static ulong scsi_write(int device, lbaint_t blknr, |
758c9e69 HTL |
433 | lbaint_t blkcnt, const void *buffer) |
434 | { | |
435 | lbaint_t start, blks; | |
436 | uintptr_t buf_addr; | |
437 | unsigned short smallblks; | |
438 | ccb* pccb = (ccb *)&tempccb; | |
439 | device &= 0xff; | |
440 | /* Setup device | |
441 | */ | |
442 | pccb->target = scsi_dev_desc[device].target; | |
443 | pccb->lun = scsi_dev_desc[device].lun; | |
444 | buf_addr = (unsigned long)buffer; | |
445 | start = blknr; | |
446 | blks = blkcnt; | |
447 | debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", | |
448 | __func__, device, start, blks, (unsigned long)buffer); | |
449 | do { | |
450 | pccb->pdata = (unsigned char *)buf_addr; | |
451 | if (blks > SCSI_MAX_WRITE_BLK) { | |
452 | pccb->datalen = (scsi_dev_desc[device].blksz * | |
453 | SCSI_MAX_WRITE_BLK); | |
454 | smallblks = SCSI_MAX_WRITE_BLK; | |
455 | scsi_setup_write_ext(pccb, start, smallblks); | |
456 | start += SCSI_MAX_WRITE_BLK; | |
457 | blks -= SCSI_MAX_WRITE_BLK; | |
458 | } else { | |
459 | pccb->datalen = scsi_dev_desc[device].blksz * blks; | |
460 | smallblks = (unsigned short)blks; | |
461 | scsi_setup_write_ext(pccb, start, smallblks); | |
462 | start += blks; | |
463 | blks = 0; | |
464 | } | |
f3609473 | 465 | debug("%s: startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", |
758c9e69 | 466 | __func__, start, smallblks, buf_addr); |
472d5460 | 467 | if (scsi_exec(pccb) != true) { |
758c9e69 HTL |
468 | scsi_print_error(pccb); |
469 | blkcnt -= blks; | |
470 | break; | |
471 | } | |
472 | buf_addr += pccb->datalen; | |
473 | } while (blks != 0); | |
f3609473 | 474 | debug("%s: end startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n", |
758c9e69 HTL |
475 | __func__, start, smallblks, buf_addr); |
476 | return blkcnt; | |
477 | } | |
478 | ||
e887afc9 WD |
479 | /* copy src to dest, skipping leading and trailing blanks |
480 | * and null terminate the string | |
481 | */ | |
482 | void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len) | |
483 | { | |
484 | int start,end; | |
485 | ||
486 | start=0; | |
487 | while(start<len) { | |
488 | if(src[start]!=' ') | |
489 | break; | |
490 | start++; | |
491 | } | |
492 | end=len-1; | |
493 | while(end>start) { | |
494 | if(src[end]!=' ') | |
495 | break; | |
496 | end--; | |
497 | } | |
498 | for( ; start<=end; start++) { | |
499 | *dest++=src[start]; | |
500 | } | |
501 | *dest='\0'; | |
502 | } | |
503 | ||
504 | ||
e887afc9 WD |
505 | /* Trim trailing blanks, and NUL-terminate string |
506 | */ | |
507 | void scsi_trim_trail (unsigned char *str, unsigned int len) | |
508 | { | |
509 | unsigned char *p = str + len - 1; | |
510 | ||
511 | while (len-- > 0) { | |
512 | *p-- = '\0'; | |
513 | if (*p != ' ') { | |
514 | return; | |
515 | } | |
516 | } | |
517 | } | |
518 | ||
b4c5bbce GB |
519 | int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz) |
520 | { | |
521 | *capacity = 0; | |
522 | ||
523 | memset(pccb->cmd, 0, sizeof(pccb->cmd)); | |
524 | pccb->cmd[0] = SCSI_RD_CAPAC10; | |
525 | pccb->cmd[1] = pccb->lun << 5; | |
526 | pccb->cmdlen = 10; | |
527 | pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
528 | ||
529 | pccb->datalen = 8; | |
472d5460 | 530 | if (scsi_exec(pccb) != true) |
b4c5bbce GB |
531 | return 1; |
532 | ||
533 | *capacity = ((lbaint_t)pccb->pdata[0] << 24) | | |
534 | ((lbaint_t)pccb->pdata[1] << 16) | | |
535 | ((lbaint_t)pccb->pdata[2] << 8) | | |
536 | ((lbaint_t)pccb->pdata[3]); | |
537 | ||
538 | if (*capacity != 0xffffffff) { | |
539 | /* Read capacity (10) was sufficient for this drive. */ | |
540 | *blksz = ((unsigned long)pccb->pdata[4] << 24) | | |
541 | ((unsigned long)pccb->pdata[5] << 16) | | |
542 | ((unsigned long)pccb->pdata[6] << 8) | | |
543 | ((unsigned long)pccb->pdata[7]); | |
544 | return 0; | |
545 | } | |
546 | ||
547 | /* Read capacity (10) was insufficient. Use read capacity (16). */ | |
548 | ||
549 | memset(pccb->cmd, 0, sizeof(pccb->cmd)); | |
550 | pccb->cmd[0] = SCSI_RD_CAPAC16; | |
551 | pccb->cmd[1] = 0x10; | |
552 | pccb->cmdlen = 16; | |
553 | pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
554 | ||
555 | pccb->datalen = 16; | |
472d5460 | 556 | if (scsi_exec(pccb) != true) |
b4c5bbce GB |
557 | return 1; |
558 | ||
559 | *capacity = ((uint64_t)pccb->pdata[0] << 56) | | |
560 | ((uint64_t)pccb->pdata[1] << 48) | | |
561 | ((uint64_t)pccb->pdata[2] << 40) | | |
562 | ((uint64_t)pccb->pdata[3] << 32) | | |
563 | ((uint64_t)pccb->pdata[4] << 24) | | |
564 | ((uint64_t)pccb->pdata[5] << 16) | | |
565 | ((uint64_t)pccb->pdata[6] << 8) | | |
566 | ((uint64_t)pccb->pdata[7]); | |
567 | ||
568 | *blksz = ((uint64_t)pccb->pdata[8] << 56) | | |
569 | ((uint64_t)pccb->pdata[9] << 48) | | |
570 | ((uint64_t)pccb->pdata[10] << 40) | | |
571 | ((uint64_t)pccb->pdata[11] << 32) | | |
572 | ((uint64_t)pccb->pdata[12] << 24) | | |
573 | ((uint64_t)pccb->pdata[13] << 16) | | |
574 | ((uint64_t)pccb->pdata[14] << 8) | | |
575 | ((uint64_t)pccb->pdata[15]); | |
576 | ||
577 | return 0; | |
578 | } | |
579 | ||
e887afc9 WD |
580 | |
581 | /************************************************************************************ | |
582 | * Some setup (fill-in) routines | |
583 | */ | |
584 | void scsi_setup_test_unit_ready(ccb * pccb) | |
585 | { | |
586 | pccb->cmd[0]=SCSI_TST_U_RDY; | |
587 | pccb->cmd[1]=pccb->lun<<5; | |
588 | pccb->cmd[2]=0; | |
589 | pccb->cmd[3]=0; | |
590 | pccb->cmd[4]=0; | |
591 | pccb->cmd[5]=0; | |
592 | pccb->cmdlen=6; | |
593 | pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ | |
594 | } | |
595 | ||
2b42c931 ML |
596 | #ifdef CONFIG_SYS_64BIT_LBA |
597 | void scsi_setup_read16(ccb * pccb, lbaint_t start, unsigned long blocks) | |
598 | { | |
599 | pccb->cmd[0] = SCSI_READ16; | |
600 | pccb->cmd[1] = pccb->lun<<5; | |
601 | pccb->cmd[2] = ((unsigned char) (start >> 56)) & 0xff; | |
602 | pccb->cmd[3] = ((unsigned char) (start >> 48)) & 0xff; | |
603 | pccb->cmd[4] = ((unsigned char) (start >> 40)) & 0xff; | |
604 | pccb->cmd[5] = ((unsigned char) (start >> 32)) & 0xff; | |
605 | pccb->cmd[6] = ((unsigned char) (start >> 24)) & 0xff; | |
606 | pccb->cmd[7] = ((unsigned char) (start >> 16)) & 0xff; | |
607 | pccb->cmd[8] = ((unsigned char) (start >> 8)) & 0xff; | |
608 | pccb->cmd[9] = ((unsigned char) (start)) & 0xff; | |
609 | pccb->cmd[10] = 0; | |
610 | pccb->cmd[11] = ((unsigned char) (blocks >> 24)) & 0xff; | |
611 | pccb->cmd[12] = ((unsigned char) (blocks >> 16)) & 0xff; | |
612 | pccb->cmd[13] = ((unsigned char) (blocks >> 8)) & 0xff; | |
613 | pccb->cmd[14] = (unsigned char) blocks & 0xff; | |
614 | pccb->cmd[15] = 0; | |
615 | pccb->cmdlen = 16; | |
616 | pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
617 | debug ("scsi_setup_read16: cmd: %02X %02X " | |
618 | "startblk %02X%02X%02X%02X%02X%02X%02X%02X " | |
619 | "blccnt %02X%02X%02X%02X\n", | |
620 | pccb->cmd[0], pccb->cmd[1], | |
621 | pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], | |
622 | pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9], | |
623 | pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]); | |
624 | } | |
625 | #endif | |
626 | ||
35df8931 | 627 | void scsi_setup_read_ext(ccb * pccb, lbaint_t start, unsigned short blocks) |
e887afc9 WD |
628 | { |
629 | pccb->cmd[0]=SCSI_READ10; | |
630 | pccb->cmd[1]=pccb->lun<<5; | |
631 | pccb->cmd[2]=((unsigned char) (start>>24))&0xff; | |
632 | pccb->cmd[3]=((unsigned char) (start>>16))&0xff; | |
633 | pccb->cmd[4]=((unsigned char) (start>>8))&0xff; | |
634 | pccb->cmd[5]=((unsigned char) (start))&0xff; | |
635 | pccb->cmd[6]=0; | |
636 | pccb->cmd[7]=((unsigned char) (blocks>>8))&0xff; | |
637 | pccb->cmd[8]=(unsigned char) blocks & 0xff; | |
638 | pccb->cmd[6]=0; | |
639 | pccb->cmdlen=10; | |
640 | pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ | |
1a344f29 | 641 | debug ("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", |
e887afc9 WD |
642 | pccb->cmd[0],pccb->cmd[1], |
643 | pccb->cmd[2],pccb->cmd[3],pccb->cmd[4],pccb->cmd[5], | |
644 | pccb->cmd[7],pccb->cmd[8]); | |
645 | } | |
646 | ||
35df8931 | 647 | void scsi_setup_write_ext(ccb *pccb, lbaint_t start, unsigned short blocks) |
758c9e69 HTL |
648 | { |
649 | pccb->cmd[0] = SCSI_WRITE10; | |
650 | pccb->cmd[1] = pccb->lun << 5; | |
651 | pccb->cmd[2] = ((unsigned char) (start>>24)) & 0xff; | |
652 | pccb->cmd[3] = ((unsigned char) (start>>16)) & 0xff; | |
653 | pccb->cmd[4] = ((unsigned char) (start>>8)) & 0xff; | |
654 | pccb->cmd[5] = ((unsigned char) (start)) & 0xff; | |
655 | pccb->cmd[6] = 0; | |
656 | pccb->cmd[7] = ((unsigned char) (blocks>>8)) & 0xff; | |
657 | pccb->cmd[8] = (unsigned char)blocks & 0xff; | |
658 | pccb->cmd[9] = 0; | |
659 | pccb->cmdlen = 10; | |
660 | pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ | |
661 | debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", | |
662 | __func__, | |
663 | pccb->cmd[0], pccb->cmd[1], | |
664 | pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], | |
665 | pccb->cmd[7], pccb->cmd[8]); | |
666 | } | |
667 | ||
35df8931 | 668 | void scsi_setup_read6(ccb * pccb, lbaint_t start, unsigned short blocks) |
e887afc9 WD |
669 | { |
670 | pccb->cmd[0]=SCSI_READ6; | |
671 | pccb->cmd[1]=pccb->lun<<5 | (((unsigned char)(start>>16))&0x1f); | |
672 | pccb->cmd[2]=((unsigned char) (start>>8))&0xff; | |
673 | pccb->cmd[3]=((unsigned char) (start))&0xff; | |
674 | pccb->cmd[4]=(unsigned char) blocks & 0xff; | |
675 | pccb->cmd[5]=0; | |
676 | pccb->cmdlen=6; | |
677 | pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ | |
1a344f29 | 678 | debug ("scsi_setup_read6: cmd: %02X %02X startblk %02X%02X blccnt %02X\n", |
e887afc9 WD |
679 | pccb->cmd[0],pccb->cmd[1], |
680 | pccb->cmd[2],pccb->cmd[3],pccb->cmd[4]); | |
681 | } | |
682 | ||
683 | ||
684 | void scsi_setup_inquiry(ccb * pccb) | |
685 | { | |
686 | pccb->cmd[0]=SCSI_INQUIRY; | |
687 | pccb->cmd[1]=pccb->lun<<5; | |
688 | pccb->cmd[2]=0; | |
689 | pccb->cmd[3]=0; | |
690 | if(pccb->datalen>255) | |
691 | pccb->cmd[4]=255; | |
692 | else | |
693 | pccb->cmd[4]=(unsigned char)pccb->datalen; | |
694 | pccb->cmd[5]=0; | |
695 | pccb->cmdlen=6; | |
696 | pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ | |
697 | } | |
698 | ||
460c322f WD |
699 | |
700 | U_BOOT_CMD( | |
701 | scsi, 5, 1, do_scsi, | |
2fb2604d | 702 | "SCSI sub-system", |
460c322f WD |
703 | "reset - reset SCSI controller\n" |
704 | "scsi info - show available SCSI devices\n" | |
705 | "scsi scan - (re-)scan SCSI bus\n" | |
706 | "scsi device [dev] - show or set current device\n" | |
707 | "scsi part [dev] - print partition table of one or all SCSI devices\n" | |
708 | "scsi read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" | |
758c9e69 HTL |
709 | " to memory address `addr'\n" |
710 | "scsi write addr blk# cnt - write `cnt' blocks starting at block\n" | |
711 | " `blk#' from memory address `addr'" | |
460c322f WD |
712 | ); |
713 | ||
714 | U_BOOT_CMD( | |
715 | scsiboot, 3, 1, do_scsiboot, | |
2fb2604d | 716 | "boot from SCSI device", |
a89c33db | 717 | "loadAddr dev:part" |
460c322f | 718 | ); |