]>
Commit | Line | Data |
---|---|---|
9490a7f1 | 1 | /* |
3d7506fa | 2 | * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc. |
9490a7f1 KG |
3 | * |
4 | * See file CREDITS for list of people who contributed to this | |
5 | * project. | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or | |
8 | * modify it under the terms of the GNU General Public License as | |
9 | * published by the Free Software Foundation; either version 2 of | |
10 | * the License, or (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
20 | * MA 02111-1307 USA | |
21 | */ | |
22 | ||
23 | /* | |
24 | * mpc8536ds board configuration file | |
25 | * | |
26 | */ | |
27 | #ifndef __CONFIG_H | |
28 | #define __CONFIG_H | |
29 | ||
c7e1a43d KG |
30 | #include "../board/freescale/common/ics307_clk.h" |
31 | ||
d24f2d32 | 32 | #ifdef CONFIG_36BIT |
337f9fde KG |
33 | #define CONFIG_PHYS_64BIT 1 |
34 | #endif | |
35 | ||
d24f2d32 | 36 | #ifdef CONFIG_NAND |
9a1a0aed MH |
37 | #define CONFIG_NAND_U_BOOT 1 |
38 | #define CONFIG_RAMBOOT_NAND 1 | |
96196a1f HW |
39 | #ifdef CONFIG_NAND_SPL |
40 | #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 | |
41 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ | |
42 | #else | |
00203c64 | 43 | #define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds |
2ae18241 | 44 | #define CONFIG_SYS_TEXT_BASE 0xf8f82000 |
96196a1f | 45 | #endif /* CONFIG_NAND_SPL */ |
9a1a0aed MH |
46 | #endif |
47 | ||
d24f2d32 | 48 | #ifdef CONFIG_SDCARD |
e40ac487 | 49 | #define CONFIG_RAMBOOT_SDCARD 1 |
2ae18241 | 50 | #define CONFIG_SYS_TEXT_BASE 0xf8f80000 |
7a577fda | 51 | #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc |
e40ac487 MH |
52 | #endif |
53 | ||
d24f2d32 | 54 | #ifdef CONFIG_SPIFLASH |
e40ac487 | 55 | #define CONFIG_RAMBOOT_SPIFLASH 1 |
2ae18241 | 56 | #define CONFIG_SYS_TEXT_BASE 0xf8f80000 |
7a577fda | 57 | #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc |
2ae18241 WD |
58 | #endif |
59 | ||
60 | #ifndef CONFIG_SYS_TEXT_BASE | |
61 | #define CONFIG_SYS_TEXT_BASE 0xeff80000 | |
e40ac487 MH |
62 | #endif |
63 | ||
7a577fda KG |
64 | #ifndef CONFIG_RESET_VECTOR_ADDRESS |
65 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
66 | #endif | |
67 | ||
96196a1f HW |
68 | #ifndef CONFIG_SYS_MONITOR_BASE |
69 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ | |
70 | #endif | |
71 | ||
9490a7f1 KG |
72 | /* High Level Configuration Options */ |
73 | #define CONFIG_BOOKE 1 /* BOOKE */ | |
74 | #define CONFIG_E500 1 /* BOOKE e500 family */ | |
75 | #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ | |
76 | #define CONFIG_MPC8536 1 | |
77 | #define CONFIG_MPC8536DS 1 | |
78 | ||
c51fc5d5 | 79 | #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ |
ae2044d8 | 80 | #define CONFIG_SPI_FLASH 1 /* Has SPI Flash */ |
9490a7f1 KG |
81 | #define CONFIG_PCI 1 /* Enable PCI/PCIE */ |
82 | #define CONFIG_PCI1 1 /* Enable PCI controller 1 */ | |
83 | #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ | |
84 | #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ | |
85 | #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ | |
86 | #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ | |
842033e6 | 87 | #define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ |
9490a7f1 | 88 | #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ |
0151cbac | 89 | #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ |
9490a7f1 KG |
90 | |
91 | #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ | |
f6155c6f | 92 | #define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/ |
9490a7f1 KG |
93 | |
94 | #define CONFIG_TSEC_ENET /* tsec ethernet support */ | |
95 | #define CONFIG_ENV_OVERWRITE | |
96 | ||
c7e1a43d KG |
97 | #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ |
98 | #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() | |
9490a7f1 | 99 | #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ |
9490a7f1 KG |
100 | |
101 | /* | |
102 | * These can be toggled for performance analysis, otherwise use default. | |
103 | */ | |
104 | #define CONFIG_L2_CACHE /* toggle L2 cache */ | |
105 | #define CONFIG_BTB /* toggle branch predition */ | |
9490a7f1 | 106 | |
80522dc8 AF |
107 | #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ |
108 | ||
9490a7f1 KG |
109 | #define CONFIG_ENABLE_36BIT_PHYS 1 |
110 | ||
337f9fde KG |
111 | #ifdef CONFIG_PHYS_64BIT |
112 | #define CONFIG_ADDR_MAP 1 | |
113 | #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ | |
114 | #endif | |
115 | ||
07355700 MH |
116 | #define CONFIG_SYS_MEMTEST_START 0x00010000 /* skip exception vectors */ |
117 | #define CONFIG_SYS_MEMTEST_END 0x1f000000 /* skip u-boot at top of RAM */ | |
9490a7f1 KG |
118 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ |
119 | ||
9a1a0aed MH |
120 | /* |
121 | * Config the L2 Cache as L2 SRAM | |
122 | */ | |
123 | #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 | |
124 | #ifdef CONFIG_PHYS_64BIT | |
125 | #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull | |
126 | #else | |
127 | #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR | |
128 | #endif | |
129 | #define CONFIG_SYS_L2_SIZE (512 << 10) | |
130 | #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) | |
131 | ||
e46fedfe TT |
132 | #define CONFIG_SYS_CCSRBAR 0xffe00000 |
133 | #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR | |
9490a7f1 | 134 | |
8d22ddca | 135 | #if defined(CONFIG_NAND_SPL) |
e46fedfe | 136 | #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE |
9a1a0aed MH |
137 | #endif |
138 | ||
9490a7f1 | 139 | /* DDR Setup */ |
337f9fde | 140 | #define CONFIG_VERY_BIG_RAM |
9490a7f1 KG |
141 | #define CONFIG_FSL_DDR2 |
142 | #undef CONFIG_FSL_DDR_INTERACTIVE | |
143 | #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ | |
144 | #define CONFIG_DDR_SPD | |
9490a7f1 | 145 | |
9b0ad1b1 | 146 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ |
9490a7f1 KG |
147 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef |
148 | ||
6d0f6bcf JCPV |
149 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 |
150 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
9490a7f1 KG |
151 | |
152 | #define CONFIG_NUM_DDR_CONTROLLERS 1 | |
153 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
154 | #define CONFIG_CHIP_SELECTS_PER_CTRL 2 | |
155 | ||
156 | /* I2C addresses of SPD EEPROMs */ | |
157 | #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ | |
6d0f6bcf | 158 | #define CONFIG_SYS_SPD_BUS_NUM 1 |
9490a7f1 KG |
159 | |
160 | /* These are used when DDR doesn't use SPD. */ | |
07355700 | 161 | #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ |
6d0f6bcf | 162 | #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F |
07355700 | 163 | #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ |
6d0f6bcf JCPV |
164 | #define CONFIG_SYS_DDR_TIMING_3 0x00000000 |
165 | #define CONFIG_SYS_DDR_TIMING_0 0x00260802 | |
166 | #define CONFIG_SYS_DDR_TIMING_1 0x3935d322 | |
167 | #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 | |
168 | #define CONFIG_SYS_DDR_MODE_1 0x00480432 | |
169 | #define CONFIG_SYS_DDR_MODE_2 0x00000000 | |
170 | #define CONFIG_SYS_DDR_INTERVAL 0x06180100 | |
171 | #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef | |
172 | #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 | |
173 | #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 | |
174 | #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 | |
07355700 | 175 | #define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */ |
6d0f6bcf JCPV |
176 | #define CONFIG_SYS_DDR_CONTROL2 0x04400010 |
177 | ||
178 | #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d | |
179 | #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 | |
180 | #define CONFIG_SYS_DDR_SBE 0x00010000 | |
9490a7f1 | 181 | |
9490a7f1 KG |
182 | /* Make sure required options are set */ |
183 | #ifndef CONFIG_SPD_EEPROM | |
184 | #error ("CONFIG_SPD_EEPROM is required") | |
185 | #endif | |
186 | ||
187 | #undef CONFIG_CLOCKS_IN_MHZ | |
188 | ||
189 | ||
190 | /* | |
191 | * Memory map -- xxx -this is wrong, needs updating | |
192 | * | |
193 | * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable | |
194 | * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable | |
195 | * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable | |
196 | * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable | |
197 | * | |
198 | * Localbus cacheable (TBD) | |
199 | * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable | |
200 | * | |
201 | * Localbus non-cacheable | |
c57fc289 | 202 | * 0xe000_0000 0xe7ff_ffff Promjet/free 128M non-cacheable |
9490a7f1 | 203 | * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable |
c57fc289 | 204 | * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable |
9490a7f1 KG |
205 | * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 |
206 | * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 | |
207 | * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable | |
208 | */ | |
209 | ||
210 | /* | |
211 | * Local Bus Definitions | |
212 | */ | |
6d0f6bcf | 213 | #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ |
337f9fde KG |
214 | #ifdef CONFIG_PHYS_64BIT |
215 | #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull | |
216 | #else | |
c953ddfd | 217 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE |
337f9fde | 218 | #endif |
9490a7f1 | 219 | |
9a1a0aed | 220 | #define CONFIG_FLASH_BR_PRELIM \ |
7ee41107 | 221 | (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V) |
9a1a0aed | 222 | #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 |
9490a7f1 | 223 | |
07355700 MH |
224 | #define CONFIG_SYS_BR1_PRELIM \ |
225 | (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ | |
226 | | BR_PS_16 | BR_V) | |
c953ddfd | 227 | #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 |
9490a7f1 | 228 | |
07355700 MH |
229 | #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \ |
230 | CONFIG_SYS_FLASH_BASE_PHYS } | |
6d0f6bcf | 231 | #define CONFIG_SYS_FLASH_QUIET_TEST |
9490a7f1 KG |
232 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ |
233 | ||
07355700 MH |
234 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ |
235 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
6d0f6bcf | 236 | #undef CONFIG_SYS_FLASH_CHECKSUM |
07355700 MH |
237 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ |
238 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
9490a7f1 | 239 | |
a55bb834 KG |
240 | #if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \ |
241 | defined(CONFIG_RAMBOOT_SPIFLASH) | |
9a1a0aed | 242 | #define CONFIG_SYS_RAMBOOT |
a55bb834 | 243 | #define CONFIG_SYS_EXTRA_ENV_RELOC |
9a1a0aed MH |
244 | #else |
245 | #undef CONFIG_SYS_RAMBOOT | |
246 | #endif | |
247 | ||
9490a7f1 | 248 | #define CONFIG_FLASH_CFI_DRIVER |
6d0f6bcf JCPV |
249 | #define CONFIG_SYS_FLASH_CFI |
250 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
251 | #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 | |
9490a7f1 KG |
252 | |
253 | #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ | |
254 | ||
68d4230c | 255 | #define CONFIG_HWCONFIG /* enable hwconfig */ |
9490a7f1 KG |
256 | #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ |
257 | #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ | |
337f9fde KG |
258 | #ifdef CONFIG_PHYS_64BIT |
259 | #define PIXIS_BASE_PHYS 0xfffdf0000ull | |
260 | #else | |
52b565f5 | 261 | #define PIXIS_BASE_PHYS PIXIS_BASE |
337f9fde | 262 | #endif |
9490a7f1 | 263 | |
52b565f5 | 264 | #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) |
07355700 | 265 | #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ |
9490a7f1 KG |
266 | |
267 | #define PIXIS_ID 0x0 /* Board ID at offset 0 */ | |
268 | #define PIXIS_VER 0x1 /* Board version at offset 1 */ | |
269 | #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ | |
270 | #define PIXIS_CSR 0x3 /* PIXIS General control/status register */ | |
271 | #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ | |
272 | #define PIXIS_PWR 0x5 /* PIXIS Power status register */ | |
273 | #define PIXIS_AUX 0x6 /* Auxiliary 1 register */ | |
274 | #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ | |
275 | #define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ | |
276 | #define PIXIS_VCTL 0x10 /* VELA Control Register */ | |
277 | #define PIXIS_VSTAT 0x11 /* VELA Status Register */ | |
278 | #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ | |
279 | #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ | |
280 | #define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ | |
281 | #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ | |
6bb5b412 KG |
282 | #define PIXIS_VBOOT_LBMAP 0xe0 /* VBOOT - CFG_LBMAP */ |
283 | #define PIXIS_VBOOT_LBMAP_NOR0 0x00 /* cfg_lbmap - boot from NOR 0 */ | |
284 | #define PIXIS_VBOOT_LBMAP_NOR1 0x01 /* cfg_lbmap - boot from NOR 1 */ | |
285 | #define PIXIS_VBOOT_LBMAP_NOR2 0x02 /* cfg_lbmap - boot from NOR 2 */ | |
286 | #define PIXIS_VBOOT_LBMAP_NOR3 0x03 /* cfg_lbmap - boot from NOR 3 */ | |
287 | #define PIXIS_VBOOT_LBMAP_PJET 0x04 /* cfg_lbmap - boot from projet */ | |
288 | #define PIXIS_VBOOT_LBMAP_NAND 0x05 /* cfg_lbmap - boot from NAND */ | |
9490a7f1 KG |
289 | #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ |
290 | #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ | |
291 | #define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ | |
292 | #define PIXIS_VSYSCLK0 0x1A /* VELA SYSCLK0 Register */ | |
293 | #define PIXIS_VSYSCLK1 0x1B /* VELA SYSCLK1 Register */ | |
294 | #define PIXIS_VSYSCLK2 0x1C /* VELA SYSCLK2 Register */ | |
295 | #define PIXIS_VDDRCLK0 0x1D /* VELA DDRCLK0 Register */ | |
296 | #define PIXIS_VDDRCLK1 0x1E /* VELA DDRCLK1 Register */ | |
297 | #define PIXIS_VDDRCLK2 0x1F /* VELA DDRCLK2 Register */ | |
298 | #define PIXIS_VWATCH 0x24 /* Watchdog Register */ | |
299 | #define PIXIS_LED 0x25 /* LED Register */ | |
300 | ||
9a1a0aed MH |
301 | #define PIXIS_SPD_SYSCLK 0x7 /* SYSCLK option */ |
302 | ||
9490a7f1 KG |
303 | /* old pixis referenced names */ |
304 | #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ | |
305 | #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ | |
509e19ca | 306 | #define CONFIG_SYS_PIXIS_VBOOT_MASK 0x4e |
9490a7f1 | 307 | |
6d0f6bcf JCPV |
308 | #define CONFIG_SYS_INIT_RAM_LOCK 1 |
309 | #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ | |
553f0982 | 310 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ |
9490a7f1 | 311 | |
07355700 | 312 | #define CONFIG_SYS_GBL_DATA_OFFSET \ |
25ddd1fb | 313 | (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
6d0f6bcf | 314 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
9490a7f1 | 315 | |
07355700 MH |
316 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ |
317 | #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ | |
9490a7f1 | 318 | |
9a1a0aed | 319 | #ifndef CONFIG_NAND_SPL |
337f9fde KG |
320 | #define CONFIG_SYS_NAND_BASE 0xffa00000 |
321 | #ifdef CONFIG_PHYS_64BIT | |
322 | #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull | |
323 | #else | |
324 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
325 | #endif | |
9a1a0aed MH |
326 | #else |
327 | #define CONFIG_SYS_NAND_BASE 0xfff00000 | |
328 | #ifdef CONFIG_PHYS_64BIT | |
329 | #define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull | |
330 | #else | |
331 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
332 | #endif | |
333 | #endif | |
c57fc289 JJ |
334 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ |
335 | CONFIG_SYS_NAND_BASE + 0x40000, \ | |
336 | CONFIG_SYS_NAND_BASE + 0x80000, \ | |
337 | CONFIG_SYS_NAND_BASE + 0xC0000} | |
338 | #define CONFIG_SYS_MAX_NAND_DEVICE 4 | |
c57fc289 JJ |
339 | #define CONFIG_MTD_NAND_VERIFY_WRITE |
340 | #define CONFIG_CMD_NAND 1 | |
341 | #define CONFIG_NAND_FSL_ELBC 1 | |
342 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
343 | ||
9a1a0aed MH |
344 | /* NAND boot: 4K NAND loader config */ |
345 | #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 | |
346 | #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) | |
347 | #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) | |
348 | #define CONFIG_SYS_NAND_U_BOOT_START \ | |
349 | (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) | |
350 | #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) | |
351 | #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) | |
352 | #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) | |
353 | ||
c57fc289 | 354 | /* NAND flash config */ |
a3055c58 | 355 | #define CONFIG_SYS_NAND_BR_PRELIM \ |
07355700 MH |
356 | (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ |
357 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | |
358 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
359 | | BR_MS_FCM /* MSEL = FCM */ \ | |
360 | | BR_V) /* valid */ | |
a3055c58 | 361 | #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ |
07355700 MH |
362 | | OR_FCM_PGS /* Large Page*/ \ |
363 | | OR_FCM_CSCT \ | |
364 | | OR_FCM_CST \ | |
365 | | OR_FCM_CHT \ | |
366 | | OR_FCM_SCY_1 \ | |
367 | | OR_FCM_TRLX \ | |
368 | | OR_FCM_EHTR) | |
369 | ||
9a1a0aed | 370 | #ifdef CONFIG_RAMBOOT_NAND |
a3055c58 MM |
371 | #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ |
372 | #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ | |
9a1a0aed MH |
373 | #define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ |
374 | #define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ | |
375 | #else | |
376 | #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ | |
377 | #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ | |
a3055c58 MM |
378 | #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ |
379 | #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ | |
9a1a0aed | 380 | #endif |
07355700 MH |
381 | |
382 | #define CONFIG_SYS_BR4_PRELIM \ | |
7ee41107 | 383 | (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \ |
07355700 MH |
384 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ |
385 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
386 | | BR_MS_FCM /* MSEL = FCM */ \ | |
387 | | BR_V) /* valid */ | |
a3055c58 | 388 | #define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ |
07355700 | 389 | #define CONFIG_SYS_BR5_PRELIM \ |
7ee41107 | 390 | (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \ |
07355700 MH |
391 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ |
392 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
393 | | BR_MS_FCM /* MSEL = FCM */ \ | |
394 | | BR_V) /* valid */ | |
a3055c58 | 395 | #define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ |
07355700 MH |
396 | |
397 | #define CONFIG_SYS_BR6_PRELIM \ | |
7ee41107 | 398 | (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \ |
07355700 MH |
399 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ |
400 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
401 | | BR_MS_FCM /* MSEL = FCM */ \ | |
402 | | BR_V) /* valid */ | |
a3055c58 | 403 | #define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ |
c57fc289 | 404 | |
9490a7f1 KG |
405 | /* Serial Port - controlled on board with jumper J8 |
406 | * open - index 2 | |
407 | * shorted - index 1 | |
408 | */ | |
409 | #define CONFIG_CONS_INDEX 1 | |
6d0f6bcf JCPV |
410 | #define CONFIG_SYS_NS16550 |
411 | #define CONFIG_SYS_NS16550_SERIAL | |
412 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
413 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
93341909 KG |
414 | #ifdef CONFIG_NAND_SPL |
415 | #define CONFIG_NS16550_MIN_FUNCTIONS | |
416 | #endif | |
9490a7f1 | 417 | |
6d0f6bcf | 418 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
9490a7f1 KG |
419 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} |
420 | ||
07355700 MH |
421 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) |
422 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) | |
9490a7f1 KG |
423 | |
424 | /* Use the HUSH parser */ | |
6d0f6bcf | 425 | #define CONFIG_SYS_HUSH_PARSER |
9490a7f1 KG |
426 | |
427 | /* | |
428 | * Pass open firmware flat tree | |
429 | */ | |
430 | #define CONFIG_OF_LIBFDT 1 | |
431 | #define CONFIG_OF_BOARD_SETUP 1 | |
432 | #define CONFIG_OF_STDOUT_VIA_ALIAS 1 | |
433 | ||
9490a7f1 KG |
434 | /* |
435 | * I2C | |
436 | */ | |
437 | #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ | |
438 | #define CONFIG_HARD_I2C /* I2C with hardware support */ | |
9490a7f1 | 439 | #define CONFIG_I2C_MULTI_BUS |
6d0f6bcf JCPV |
440 | #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ |
441 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
442 | #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} /* Don't probe these addrs */ | |
443 | #define CONFIG_SYS_I2C_OFFSET 0x3000 | |
444 | #define CONFIG_SYS_I2C2_OFFSET 0x3100 | |
9490a7f1 KG |
445 | |
446 | /* | |
447 | * I2C2 EEPROM | |
448 | */ | |
32628c50 JCPV |
449 | #define CONFIG_ID_EEPROM |
450 | #ifdef CONFIG_ID_EEPROM | |
6d0f6bcf | 451 | #define CONFIG_SYS_I2C_EEPROM_NXID |
9490a7f1 | 452 | #endif |
6d0f6bcf JCPV |
453 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 |
454 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
455 | #define CONFIG_SYS_EEPROM_BUS_NUM 1 | |
9490a7f1 | 456 | |
ae2044d8 XX |
457 | /* |
458 | * eSPI - Enhanced SPI | |
459 | */ | |
460 | #define CONFIG_HARD_SPI | |
461 | #define CONFIG_FSL_ESPI | |
462 | ||
463 | #if defined(CONFIG_SPI_FLASH) | |
464 | #define CONFIG_SPI_FLASH_SPANSION | |
465 | #define CONFIG_CMD_SF | |
466 | #define CONFIG_SF_DEFAULT_SPEED 10000000 | |
467 | #define CONFIG_SF_DEFAULT_MODE 0 | |
468 | #endif | |
469 | ||
9490a7f1 KG |
470 | /* |
471 | * General PCI | |
472 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
473 | */ | |
474 | ||
5af0fdd8 | 475 | #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 |
337f9fde KG |
476 | #ifdef CONFIG_PHYS_64BIT |
477 | #define CONFIG_SYS_PCI1_MEM_BUS 0xf0000000 | |
478 | #define CONFIG_SYS_PCI1_MEM_PHYS 0xc00000000ull | |
479 | #else | |
5af0fdd8 KG |
480 | #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 |
481 | #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 | |
337f9fde | 482 | #endif |
6d0f6bcf | 483 | #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ |
337f9fde KG |
484 | #define CONFIG_SYS_PCI1_IO_VIRT 0xffc00000 |
485 | #define CONFIG_SYS_PCI1_IO_BUS 0x00000000 | |
486 | #ifdef CONFIG_PHYS_64BIT | |
487 | #define CONFIG_SYS_PCI1_IO_PHYS 0xfffc00000ull | |
488 | #else | |
489 | #define CONFIG_SYS_PCI1_IO_PHYS 0xffc00000 | |
490 | #endif | |
491 | #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */ | |
9490a7f1 KG |
492 | |
493 | /* controller 1, Slot 1, tgtid 1, Base address a000 */ | |
5f7b31b0 | 494 | #define CONFIG_SYS_PCIE1_NAME "Slot 1" |
5af0fdd8 | 495 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 |
337f9fde KG |
496 | #ifdef CONFIG_PHYS_64BIT |
497 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xf8000000 | |
498 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc10000000ull | |
499 | #else | |
10795f42 | 500 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000 |
5af0fdd8 | 501 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000 |
337f9fde | 502 | #endif |
6d0f6bcf | 503 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x08000000 /* 128M */ |
aca5f018 | 504 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc10000 |
337f9fde KG |
505 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 |
506 | #ifdef CONFIG_PHYS_64BIT | |
507 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc10000ull | |
508 | #else | |
6d0f6bcf | 509 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc10000 |
337f9fde | 510 | #endif |
6d0f6bcf | 511 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ |
9490a7f1 KG |
512 | |
513 | /* controller 2, Slot 2, tgtid 2, Base address 9000 */ | |
5f7b31b0 | 514 | #define CONFIG_SYS_PCIE2_NAME "Slot 2" |
5af0fdd8 | 515 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0x98000000 |
337f9fde KG |
516 | #ifdef CONFIG_PHYS_64BIT |
517 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xf8000000 | |
518 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc18000000ull | |
519 | #else | |
10795f42 | 520 | #define CONFIG_SYS_PCIE2_MEM_BUS 0x98000000 |
5af0fdd8 | 521 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0x98000000 |
337f9fde | 522 | #endif |
6d0f6bcf | 523 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x08000000 /* 128M */ |
aca5f018 | 524 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc20000 |
337f9fde KG |
525 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 |
526 | #ifdef CONFIG_PHYS_64BIT | |
527 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc20000ull | |
528 | #else | |
6d0f6bcf | 529 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc20000 |
337f9fde | 530 | #endif |
6d0f6bcf | 531 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ |
9490a7f1 KG |
532 | |
533 | /* controller 3, direct to uli, tgtid 3, Base address 8000 */ | |
5f7b31b0 | 534 | #define CONFIG_SYS_PCIE3_NAME "Slot 3" |
5af0fdd8 | 535 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 |
337f9fde KG |
536 | #ifdef CONFIG_PHYS_64BIT |
537 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 | |
538 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull | |
539 | #else | |
10795f42 | 540 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 |
5af0fdd8 | 541 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 |
337f9fde | 542 | #endif |
6d0f6bcf | 543 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ |
aca5f018 | 544 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc30000 |
337f9fde KG |
545 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 |
546 | #ifdef CONFIG_PHYS_64BIT | |
547 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc30000ull | |
548 | #else | |
6d0f6bcf | 549 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc30000 |
337f9fde | 550 | #endif |
6d0f6bcf | 551 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ |
9490a7f1 KG |
552 | |
553 | #if defined(CONFIG_PCI) | |
554 | ||
9490a7f1 KG |
555 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
556 | ||
557 | /*PCIE video card used*/ | |
aca5f018 | 558 | #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE3_IO_VIRT |
9490a7f1 KG |
559 | |
560 | /*PCI video card used*/ | |
aca5f018 | 561 | /*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/ |
9490a7f1 KG |
562 | |
563 | /* video */ | |
564 | #define CONFIG_VIDEO | |
565 | ||
566 | #if defined(CONFIG_VIDEO) | |
567 | #define CONFIG_BIOSEMU | |
568 | #define CONFIG_CFB_CONSOLE | |
569 | #define CONFIG_VIDEO_SW_CURSOR | |
570 | #define CONFIG_VGA_AS_SINGLE_DEVICE | |
571 | #define CONFIG_ATI_RADEON_FB | |
572 | #define CONFIG_VIDEO_LOGO | |
573 | /*#define CONFIG_CONSOLE_CURSOR*/ | |
aca5f018 | 574 | #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT |
9490a7f1 KG |
575 | #endif |
576 | ||
577 | #undef CONFIG_EEPRO100 | |
578 | #undef CONFIG_TULIP | |
579 | #undef CONFIG_RTL8139 | |
580 | ||
9490a7f1 | 581 | #ifndef CONFIG_PCI_PNP |
5f91ef6a KG |
582 | #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS |
583 | #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS | |
9490a7f1 KG |
584 | #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ |
585 | #endif | |
586 | ||
587 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
588 | ||
589 | #endif /* CONFIG_PCI */ | |
590 | ||
591 | /* SATA */ | |
592 | #define CONFIG_LIBATA | |
593 | #define CONFIG_FSL_SATA | |
594 | ||
6d0f6bcf | 595 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 |
9490a7f1 | 596 | #define CONFIG_SATA1 |
6d0f6bcf JCPV |
597 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR |
598 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
9490a7f1 | 599 | #define CONFIG_SATA2 |
6d0f6bcf JCPV |
600 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR |
601 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
9490a7f1 KG |
602 | |
603 | #ifdef CONFIG_FSL_SATA | |
604 | #define CONFIG_LBA48 | |
605 | #define CONFIG_CMD_SATA | |
606 | #define CONFIG_DOS_PARTITION | |
607 | #define CONFIG_CMD_EXT2 | |
608 | #endif | |
609 | ||
610 | #if defined(CONFIG_TSEC_ENET) | |
611 | ||
9490a7f1 KG |
612 | #define CONFIG_MII 1 /* MII PHY management */ |
613 | #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ | |
614 | #define CONFIG_TSEC1 1 | |
615 | #define CONFIG_TSEC1_NAME "eTSEC1" | |
616 | #define CONFIG_TSEC3 1 | |
617 | #define CONFIG_TSEC3_NAME "eTSEC3" | |
618 | ||
2e26d837 JJ |
619 | #define CONFIG_FSL_SGMII_RISER 1 |
620 | #define SGMII_RISER_PHY_OFFSET 0x1c | |
621 | ||
9490a7f1 KG |
622 | #define TSEC1_PHY_ADDR 1 /* TSEC1 -> PHY1 */ |
623 | #define TSEC3_PHY_ADDR 0 /* TSEC3 -> PHY0 */ | |
624 | ||
625 | #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
626 | #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
627 | ||
628 | #define TSEC1_PHYIDX 0 | |
629 | #define TSEC3_PHYIDX 0 | |
630 | ||
631 | #define CONFIG_ETHPRIME "eTSEC1" | |
632 | ||
633 | #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ | |
634 | ||
635 | #endif /* CONFIG_TSEC_ENET */ | |
636 | ||
637 | /* | |
638 | * Environment | |
639 | */ | |
9a1a0aed MH |
640 | |
641 | #if defined(CONFIG_SYS_RAMBOOT) | |
642 | #if defined(CONFIG_RAMBOOT_NAND) | |
2d4afd49 XX |
643 | #define CONFIG_ENV_IS_IN_NAND 1 |
644 | #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE | |
645 | #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) | |
646 | #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) | |
647 | #elif defined(CONFIG_RAMBOOT_SPIFLASH) | |
648 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
649 | #define CONFIG_ENV_SPI_BUS 0 | |
650 | #define CONFIG_ENV_SPI_CS 0 | |
651 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
652 | #define CONFIG_ENV_SPI_MODE 0 | |
653 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
654 | #define CONFIG_ENV_OFFSET 0xF0000 | |
655 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
656 | #elif defined(CONFIG_RAMBOOT_SDCARD) | |
657 | #define CONFIG_ENV_IS_IN_MMC | |
4394d0c2 | 658 | #define CONFIG_FSL_FIXED_MMC_LOCATION |
2d4afd49 XX |
659 | #define CONFIG_ENV_SIZE 0x2000 |
660 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
661 | #else | |
e40ac487 MH |
662 | #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ |
663 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) | |
664 | #define CONFIG_ENV_SIZE 0x2000 | |
9a1a0aed | 665 | #endif |
9490a7f1 | 666 | #else |
9a1a0aed MH |
667 | #define CONFIG_ENV_IS_IN_FLASH 1 |
668 | #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 | |
669 | #define CONFIG_ENV_ADDR 0xfff80000 | |
670 | #else | |
671 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) | |
672 | #endif | |
673 | #define CONFIG_ENV_SIZE 0x2000 | |
674 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
9490a7f1 | 675 | #endif |
9490a7f1 KG |
676 | |
677 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
6d0f6bcf | 678 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
9490a7f1 KG |
679 | |
680 | /* | |
681 | * Command line configuration. | |
682 | */ | |
683 | #include <config_cmd_default.h> | |
684 | ||
685 | #define CONFIG_CMD_IRQ | |
686 | #define CONFIG_CMD_PING | |
687 | #define CONFIG_CMD_I2C | |
688 | #define CONFIG_CMD_MII | |
689 | #define CONFIG_CMD_ELF | |
1c9aa76b KG |
690 | #define CONFIG_CMD_IRQ |
691 | #define CONFIG_CMD_SETEXPR | |
199e262e | 692 | #define CONFIG_CMD_REGINFO |
9490a7f1 KG |
693 | |
694 | #if defined(CONFIG_PCI) | |
695 | #define CONFIG_CMD_PCI | |
9490a7f1 KG |
696 | #define CONFIG_CMD_NET |
697 | #endif | |
698 | ||
699 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
700 | ||
80522dc8 AF |
701 | #define CONFIG_MMC 1 |
702 | ||
703 | #ifdef CONFIG_MMC | |
704 | #define CONFIG_FSL_ESDHC | |
705 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
706 | #define CONFIG_CMD_MMC | |
707 | #define CONFIG_GENERIC_MMC | |
1116ebb9 F |
708 | #endif |
709 | ||
710 | /* | |
711 | * USB | |
712 | */ | |
3d7506fa | 713 | #define CONFIG_HAS_FSL_MPH_USB |
714 | #ifdef CONFIG_HAS_FSL_MPH_USB | |
1116ebb9 F |
715 | #define CONFIG_USB_EHCI |
716 | ||
717 | #ifdef CONFIG_USB_EHCI | |
718 | #define CONFIG_CMD_USB | |
719 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
720 | #define CONFIG_USB_EHCI_FSL | |
721 | #define CONFIG_USB_STORAGE | |
722 | #endif | |
3d7506fa | 723 | #endif |
1116ebb9 F |
724 | |
725 | #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) | |
80522dc8 AF |
726 | #define CONFIG_CMD_EXT2 |
727 | #define CONFIG_CMD_FAT | |
728 | #define CONFIG_DOS_PARTITION | |
729 | #endif | |
730 | ||
9490a7f1 KG |
731 | /* |
732 | * Miscellaneous configurable options | |
733 | */ | |
6d0f6bcf | 734 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
07355700 | 735 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ |
5be58f5f | 736 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ |
6d0f6bcf JCPV |
737 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
738 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
9490a7f1 | 739 | #if defined(CONFIG_CMD_KGDB) |
6d0f6bcf | 740 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
9490a7f1 | 741 | #else |
6d0f6bcf | 742 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
9490a7f1 | 743 | #endif |
07355700 MH |
744 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ |
745 | + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ | |
6d0f6bcf | 746 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
07355700 | 747 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
6d0f6bcf | 748 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ |
9490a7f1 KG |
749 | |
750 | /* | |
751 | * For booting Linux, the board info and command line data | |
a832ac41 | 752 | * have to be in the first 64 MB of memory, since this is |
9490a7f1 KG |
753 | * the maximum mapped by the Linux kernel during initialization. |
754 | */ | |
a832ac41 KG |
755 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ |
756 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
9490a7f1 | 757 | |
9490a7f1 KG |
758 | #if defined(CONFIG_CMD_KGDB) |
759 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
760 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
761 | #endif | |
762 | ||
763 | /* | |
764 | * Environment Configuration | |
765 | */ | |
766 | ||
767 | /* The mac addresses for all ethernet interface */ | |
768 | #if defined(CONFIG_TSEC_ENET) | |
769 | #define CONFIG_HAS_ETH0 | |
770 | #define CONFIG_ETHADDR 00:E0:0C:02:00:FD | |
771 | #define CONFIG_HAS_ETH1 | |
772 | #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD | |
773 | #define CONFIG_HAS_ETH2 | |
774 | #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD | |
775 | #define CONFIG_HAS_ETH3 | |
776 | #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD | |
777 | #endif | |
778 | ||
779 | #define CONFIG_IPADDR 192.168.1.254 | |
780 | ||
781 | #define CONFIG_HOSTNAME unknown | |
8b3637c6 | 782 | #define CONFIG_ROOTPATH "/opt/nfsroot" |
b3f44c21 | 783 | #define CONFIG_BOOTFILE "uImage" |
07355700 | 784 | #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ |
9490a7f1 KG |
785 | |
786 | #define CONFIG_SERVERIP 192.168.1.1 | |
787 | #define CONFIG_GATEWAYIP 192.168.1.1 | |
788 | #define CONFIG_NETMASK 255.255.255.0 | |
789 | ||
790 | /* default location for tftp and bootm */ | |
791 | #define CONFIG_LOADADDR 1000000 | |
792 | ||
793 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
794 | #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ | |
795 | ||
796 | #define CONFIG_BAUDRATE 115200 | |
797 | ||
798 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
5368c55d MV |
799 | "netdev=eth0\0" \ |
800 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
801 | "tftpflash=tftpboot $loadaddr $uboot; " \ | |
802 | "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ | |
803 | " +$filesize; " \ | |
804 | "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ | |
805 | " +$filesize; " \ | |
806 | "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ | |
807 | " $filesize; " \ | |
808 | "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ | |
809 | " +$filesize; " \ | |
810 | "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ | |
811 | " $filesize\0" \ | |
812 | "consoledev=ttyS0\0" \ | |
813 | "ramdiskaddr=2000000\0" \ | |
814 | "ramdiskfile=8536ds/ramdisk.uboot\0" \ | |
815 | "fdtaddr=c00000\0" \ | |
816 | "fdtfile=8536ds/mpc8536ds.dtb\0" \ | |
817 | "bdev=sda3\0" \ | |
818 | "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" | |
9490a7f1 KG |
819 | |
820 | #define CONFIG_HDBOOT \ | |
821 | "setenv bootargs root=/dev/$bdev rw " \ | |
822 | "console=$consoledev,$baudrate $othbootargs;" \ | |
823 | "tftp $loadaddr $bootfile;" \ | |
824 | "tftp $fdtaddr $fdtfile;" \ | |
825 | "bootm $loadaddr - $fdtaddr" | |
826 | ||
827 | #define CONFIG_NFSBOOTCOMMAND \ | |
828 | "setenv bootargs root=/dev/nfs rw " \ | |
829 | "nfsroot=$serverip:$rootpath " \ | |
830 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
831 | "console=$consoledev,$baudrate $othbootargs;" \ | |
832 | "tftp $loadaddr $bootfile;" \ | |
833 | "tftp $fdtaddr $fdtfile;" \ | |
834 | "bootm $loadaddr - $fdtaddr" | |
835 | ||
836 | #define CONFIG_RAMBOOTCOMMAND \ | |
837 | "setenv bootargs root=/dev/ram rw " \ | |
838 | "console=$consoledev,$baudrate $othbootargs;" \ | |
839 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
840 | "tftp $loadaddr $bootfile;" \ | |
841 | "tftp $fdtaddr $fdtfile;" \ | |
842 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
843 | ||
844 | #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT | |
845 | ||
846 | #endif /* __CONFIG_H */ |