[J-u-boot.git] / lib / Kconfig

menu "Library routines"

config BCH
	bool "Enable Software based BCH ECC"
	help
	  Enables software based BCH ECC algorithm present in lib/bch.c
	  This is used by SoC platforms which do not have built-in ELM
	  hardware engine required for BCH ECC correction.

config CC_OPTIMIZE_LIBS_FOR_SPEED
	bool "Optimize libraries for speed"
	help
	  Enabling this option will pass "-O2" to gcc when compiling
	  under "lib" directory.

	  If unsure, say N.

config DYNAMIC_CRC_TABLE
	bool "Enable Dynamic tables for CRC"
	help
	  Enable this option to calculate entries for CRC tables at runtime.
	  This can be helpful when reducing the size of the build image

config HAVE_ARCH_IOMAP
	bool
	help
	  Enable this option if architecture provides io{read,write}{8,16,32}
	  I/O accessor functions.

config HAVE_PRIVATE_LIBGCC
	bool

config LIB_UUID
	bool

config PRINTF
	bool
	default y

config SPL_PRINTF
	bool
	select SPL_SPRINTF
	select SPL_STRTO if !USE_TINY_PRINTF

config TPL_PRINTF
	bool
	select TPL_SPRINTF
	select TPL_STRTO if !USE_TINY_PRINTF

config SPRINTF
	bool
	default y

config SPL_SPRINTF
	bool

config TPL_SPRINTF
	bool

config STRTO
	bool
	default y

config SPL_STRTO
	bool

config TPL_STRTO
	bool

config IMAGE_SPARSE
	bool

config IMAGE_SPARSE_FILLBUF_SIZE
	hex "Android sparse image CHUNK_TYPE_FILL buffer size"
	default 0x80000
	depends on IMAGE_SPARSE
	help
	  Set the size of the fill buffer used when processing CHUNK_TYPE_FILL
	  chunks.

config USE_PRIVATE_LIBGCC
	bool "Use private libgcc"
	depends on HAVE_PRIVATE_LIBGCC
	default y if HAVE_PRIVATE_LIBGCC && ((ARM && !ARM64) || MIPS)
	help
	  This option allows you to use the built-in libgcc implementation
	  of U-Boot instead of the one provided by the compiler.
	  If unsure, say N.

config SYS_HZ
	int
	default 1000
	help
	  The frequency of the timer returned by get_timer().
	  get_timer() must operate in milliseconds and this option must be
	  set to 1000.

config USE_TINY_PRINTF
	bool "Enable tiny printf() version"
	help
	  This option enables a tiny, stripped down printf version.
	  This should only be used in space limited environments,
	  like SPL versions with hard memory limits. This version
	  reduces the code size by about 2.5KiB on armv7.

	  The supported format specifiers are %c, %s, %u/%d and %x.

config PANIC_HANG
	bool "Do not reset the system on fatal error"
	help
	  Define this option to stop the system in case of a fatal error,
	  so that you have to reset it manually. This is probably NOT a good
	  idea for an embedded system where you want the system to reboot
	  automatically as fast as possible, but it may be useful during
	  development since you can try to debug the conditions that lead to
	  the situation.

config REGEX
	bool "Enable regular expression support"
	default y if NET
	help
	  If this variable is defined, U-Boot is linked against the
	  SLRE (Super Light Regular Expression) library, which adds
	  regex support to some commands, for example "env grep" and
	  "setexpr".

choice
	prompt "Pseudo-random library support type"
	depends on NET_RANDOM_ETHADDR || RANDOM_UUID || CMD_UUID
	default LIB_RAND
	help
	  Select the library to provide pseudo-random number generator
	  functions.  LIB_HW_RAND supports certain hardware engines that
	  provide this functionality.  If in doubt, select LIB_RAND.

config LIB_RAND
	bool "Pseudo-random library support"

config LIB_HW_RAND
	bool "HW Engine for random libray support"

endchoice

config SPL_TINY_MEMSET
	bool "Use a very small memset() in SPL"
	help
	  The faster memset() is the arch-specific one (if available) enabled
	  by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get
	  better performance by writing a word at a time. But in very
	  size-constrained environments even this may be too big. Enable this
	  option to reduce code size slightly at the cost of some speed.

config TPL_TINY_MEMSET
	bool "Use a very small memset() in TPL"
	help
	  The faster memset() is the arch-specific one (if available) enabled
	  by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get
	  better performance by writing a word at a time. But in very
	  size-constrained environments even this may be too big. Enable this
	  option to reduce code size slightly at the cost of some speed.

config RBTREE
	bool

config BITREVERSE
	bool "Bit reverse library from Linux"

source lib/dhry/Kconfig

menu "Security support"

config AES
	bool "Support the AES algorithm"
	help
	  This provides a means to encrypt and decrypt data using the AES
	  (Advanced Encryption Standard). This algorithm uses a symetric key
	  and is widely used as a streaming cipher. Different key lengths are
	  supported by the algorithm but only a 128-bit key is supported at
	  present.

source lib/rsa/Kconfig

config TPM
	bool "Trusted Platform Module (TPM) Support"
	depends on DM
	help
	  This enables support for TPMs which can be used to provide security
	  features for your board. The TPM can be connected via LPC or I2C
	  and a sandbox TPM is provided for testing purposes. Use the 'tpm'
	  command to interactive the TPM. Driver model support is provided
	  for the low-level TPM interface, but only one TPM is supported at
	  a time by the TPM library.

config SPL_TPM
	bool "Trusted Platform Module (TPM) Support in SPL"
	depends on SPL_DM
	help
	  This enables support for TPMs which can be used to provide security
	  features for your board. The TPM can be connected via LPC or I2C
	  and a sandbox TPM is provided for testing purposes. Use the 'tpm'
	  command to interactive the TPM. Driver model support is provided
	  for the low-level TPM interface, but only one TPM is supported at
	  a time by the TPM library.

config TPL_TPM
	bool "Trusted Platform Module (TPM) Support in TPL"
	depends on TPL_DM
	help
	  This enables support for TPMs which can be used to provide security
	  features for your board. The TPM can be connected via LPC or I2C
	  and a sandbox TPM is provided for testing purposes. Use the 'tpm'
	  command to interactive the TPM. Driver model support is provided
	  for the low-level TPM interface, but only one TPM is supported at
	  a time by the TPM library.

endmenu

menu "Android Verified Boot"

config LIBAVB
	bool "Android Verified Boot 2.0 support"
	depends on ANDROID_BOOT_IMAGE
	default n
	help
	  This enables support of Android Verified Boot 2.0 which can be used
	  to assure the end user of the integrity of the software running on a
	  device. Introduces such features as boot chain of trust, rollback
	  protection etc.

endmenu

menu "Hashing Support"

config SHA1
	bool "Enable SHA1 support"
	help
	  This option enables support of hashing using SHA1 algorithm.
	  The hash is calculated in software.
	  The SHA1 algorithm produces a 160-bit (20-byte) hash value
	  (digest).

config SHA256
	bool "Enable SHA256 support"
	help
	  This option enables support of hashing using SHA256 algorithm.
	  The hash is calculated in software.
	  The SHA256 algorithm produces a 256-bit (32-byte) hash value
	  (digest).

config SHA_HW_ACCEL
	bool "Enable hashing using hardware"
	help
	  This option enables hardware acceleration
	  for SHA1/SHA256 hashing.
	  This affects the 'hash' command and also the
	  hash_lookup_algo() function.

config SHA_PROG_HW_ACCEL
	bool "Enable Progressive hashing support using hardware"
	depends on SHA_HW_ACCEL
	help
	  This option enables hardware-acceleration for
	  SHA1/SHA256 progressive hashing.
	  Data can be streamed in a block at a time and the hashing
	  is performed in hardware.

config MD5
	bool

config CRC32C
	bool

endmenu

menu "Compression Support"

config LZ4
	bool "Enable LZ4 decompression support"
	help
	  If this option is set, support for LZ4 compressed images
	  is included. The LZ4 algorithm can run in-place as long as the
	  compressed image is loaded to the end of the output buffer, and
	  trades lower compression ratios for much faster decompression.
	  
	  NOTE: This implements the release version of the LZ4 frame
	  format as generated by default by the 'lz4' command line tool.
	  This is not the same as the outdated, less efficient legacy
	  frame format currently (2015) implemented in the Linux kernel
	  (generated by 'lz4 -l'). The two formats are incompatible.

config LZMA
	bool "Enable LZMA decompression support"
	help
	  This enables support for LZMA (Lempel-Ziv-Markov chain algorithm),
	  a dictionary compression algorithm that provides a high compression
	  ratio and fairly fast decompression speed. See also
	  CONFIG_CMD_LZMADEC which provides a decode command.

config LZO
	bool "Enable LZO decompression support"
	help
	  This enables support for LZO compression algorithm.r

config GZIP
	bool "Enable gzip decompression support for SPL build"
	select ZLIB
	default y
	help
	  This enables support for GZIP compression algorithm.

config ZLIB
	bool
	default y
	help
	  This enables ZLIB compression lib.

config SPL_LZ4
	bool "Enable LZ4 decompression support in SPL"
	help
	  This enables support for tge LZ4 decompression algorithm in SPL. LZ4
	  is a lossless data compression algorithm that is focused on
	  fast compression and decompression speed. It belongs to the LZ77
	  family of byte-oriented compression schemes.

config SPL_LZO
	bool "Enable LZO decompression support in SPL"
	help
	  This enables support for LZO compression algorithm in the SPL.

config SPL_GZIP
	bool "Enable gzip decompression support for SPL build"
	select SPL_ZLIB
	help
	  This enables support for GZIP compression altorithm for SPL boot.

config SPL_ZLIB
	bool
	help
	  This enables compression lib for SPL boot.

endmenu

config ERRNO_STR
	bool "Enable function for getting errno-related string message"
	help
	  The function errno_str(int errno), returns a pointer to the errno
	  corresponding text message:
	  - if errno is null or positive number - a pointer to "Success" message
	  - if errno is negative - a pointer to errno related message

config HEXDUMP
	bool "Enable hexdump"
	help
	  This enables functions for printing dumps of binary data.

config OF_LIBFDT
	bool "Enable the FDT library"
	default y if OF_CONTROL
	help
	  This enables the FDT library (libfdt). It provides functions for
	  accessing binary device tree images in memory, such as adding and
	  removing nodes and properties, scanning through the tree and finding
	  particular compatible nodes. The library operates on a flattened
	  version of the device tree.

config OF_LIBFDT_OVERLAY
	bool "Enable the FDT library overlay support"
	depends on OF_LIBFDT
	default y if ARCH_OMAP2PLUS || ARCH_KEYSTONE
	help
	  This enables the FDT library (libfdt) overlay support.

config SPL_OF_LIBFDT
	bool "Enable the FDT library for SPL"
	default y if SPL_OF_CONTROL
	help
	  This enables the FDT library (libfdt). It provides functions for
	  accessing binary device tree images in memory, such as adding and
	  removing nodes and properties, scanning through the tree and finding
	  particular compatible nodes. The library operates on a flattened
	  version of the device tree.

config TPL_OF_LIBFDT
	bool "Enable the FDT library for TPL"
	default y if TPL_OF_CONTROL
	help
	  This enables the FDT library (libfdt). It provides functions for
	  accessing binary device tree images in memory, such as adding and
	  removing nodes and properties, scanning through the tree and finding
	  particular compatible nodes. The library operates on a flattened
	  version of the device tree.

config FDT_FIXUP_PARTITIONS
	bool "overwrite MTD partitions in DTS through defined in 'mtdparts'"
	depends on OF_LIBFDT
	depends on CMD_MTDPARTS
	help
	  Allow overwriting defined partitions in the device tree blob
	  using partition info defined in the 'mtdparts' environment
	  variable.

menu "System tables"
	depends on (!EFI && !SYS_COREBOOT) || (ARM && EFI_LOADER)

config GENERATE_SMBIOS_TABLE
	bool "Generate an SMBIOS (System Management BIOS) table"
	default y
	depends on X86 || EFI_LOADER
	help
	  The System Management BIOS (SMBIOS) specification addresses how
	  motherboard and system vendors present management information about
	  their products in a standard format by extending the BIOS interface
	  on Intel architecture systems.

	  Check http://www.dmtf.org/standards/smbios for details.

config SMBIOS_MANUFACTURER
	string "SMBIOS Manufacturer"
	depends on GENERATE_SMBIOS_TABLE
	default SYS_VENDOR
	help
	  The board manufacturer to store in SMBIOS structures.
	  Change this to override the default one (CONFIG_SYS_VENDOR).

config SMBIOS_PRODUCT_NAME
	string "SMBIOS Product Name"
	depends on GENERATE_SMBIOS_TABLE
	default SYS_BOARD
	help
	  The product name to store in SMBIOS structures.
	  Change this to override the default one (CONFIG_SYS_BOARD).

endmenu

source lib/efi/Kconfig
source lib/efi_loader/Kconfig
source lib/optee/Kconfig

endmenu
Commit	Line	Data
ed36323f MY	1	menu "Library routines"
ed36323f MY	2
6ef2f901 AF	3	config BCH
	4	bool "Enable Software based BCH ECC"
	5	help
	6	Enables software based BCH ECC algorithm present in lib/bch.c
	7	This is used by SoC platforms which do not have built-in ELM
	8	hardware engine required for BCH ECC correction.
	9
b0928da6 MY	10	config CC_OPTIMIZE_LIBS_FOR_SPEED
	11	bool "Optimize libraries for speed"
	12	help
	13	Enabling this option will pass "-O2" to gcc when compiling
	14	under "lib" directory.
	15
	16	If unsure, say N.
	17
36c1877c FA	18	config DYNAMIC_CRC_TABLE
	19	bool "Enable Dynamic tables for CRC"
	20	help
	21	Enable this option to calculate entries for CRC tables at runtime.
	22	This can be helpful when reducing the size of the build image
	23
2895c4b7 BM	24	config HAVE_ARCH_IOMAP
	25	bool
	26	help
	27	Enable this option if architecture provides io{read,write}{8,16,32}
	28	I/O accessor functions.
	29
45ccec8f MY	30	config HAVE_PRIVATE_LIBGCC
	31	bool
	32
a451bc27 AF	33	config LIB_UUID
	34	bool
	35
14ad44ab AK	36	config PRINTF
	37	bool
	38	default y
	39
	40	config SPL_PRINTF
	41	bool
	42	select SPL_SPRINTF
	43	select SPL_STRTO if !USE_TINY_PRINTF
	44
	45	config TPL_PRINTF
	46	bool
	47	select TPL_SPRINTF
	48	select TPL_STRTO if !USE_TINY_PRINTF
	49
	50	config SPRINTF
	51	bool
	52	default y
	53
	54	config SPL_SPRINTF
	55	bool
	56
	57	config TPL_SPRINTF
	58	bool
	59
	60	config STRTO
	61	bool
	62	default y
	63
	64	config SPL_STRTO
	65	bool
	66
	67	config TPL_STRTO
	68	bool
	69
c232d14d AK	70	config IMAGE_SPARSE
	71	bool
	72
	73	config IMAGE_SPARSE_FILLBUF_SIZE
	74	hex "Android sparse image CHUNK_TYPE_FILL buffer size"
	75	default 0x80000
	76	depends on IMAGE_SPARSE
	77	help
	78	Set the size of the fill buffer used when processing CHUNK_TYPE_FILL
	79	chunks.
	80
45ccec8f MY	81	config USE_PRIVATE_LIBGCC
	82	bool "Use private libgcc"
	83	depends on HAVE_PRIVATE_LIBGCC
91b86e21	84	default y if HAVE_PRIVATE_LIBGCC && ((ARM && !ARM64) \|\| MIPS)
45ccec8f MY	85	help
45ccec8f MY	86	This option allows you to use the built-in libgcc implementation
67976306	87	of U-Boot instead of the one provided by the compiler.
45ccec8f MY	88	If unsure, say N.
45ccec8f MY	89
8c688bc4 MY	90	config SYS_HZ
	91	int
	92	default 1000
	93	help
	94	The frequency of the timer returned by get_timer().
	95	get_timer() must operate in milliseconds and this option must be
	96	set to 1000.
	97
7d9cde10 SR	98	config USE_TINY_PRINTF
	99	bool "Enable tiny printf() version"
	100	help
	101	This option enables a tiny, stripped down printf version.
	102	This should only be used in space limited environments,
	103	like SPL versions with hard memory limits. This version
	104	reduces the code size by about 2.5KiB on armv7.
	105
	106	The supported format specifiers are %c, %s, %u/%d and %x.
	107
7e3caa81 MY	108	config PANIC_HANG
	109	bool "Do not reset the system on fatal error"
	110	help
	111	Define this option to stop the system in case of a fatal error,
	112	so that you have to reset it manually. This is probably NOT a good
	113	idea for an embedded system where you want the system to reboot
	114	automatically as fast as possible, but it may be useful during
	115	development since you can try to debug the conditions that lead to
	116	the situation.
	117
1a60650c JH	118	config REGEX
1a60650c JH	119	bool "Enable regular expression support"
f7848d90	120	default y if NET
1a60650c JH	121	help
	122	If this variable is defined, U-Boot is linked against the
	123	SLRE (Super Light Regular Expression) library, which adds
	124	regex support to some commands, for example "env grep" and
	125	"setexpr".
	126
a5a37567 AF	127	choice
	128	prompt "Pseudo-random library support type"
	129	depends on NET_RANDOM_ETHADDR \|\| RANDOM_UUID \|\| CMD_UUID
	130	default LIB_RAND
3850dbe8	131	help
a5a37567 AF	132	Select the library to provide pseudo-random number generator
	133	functions. LIB_HW_RAND supports certain hardware engines that
	134	provide this functionality. If in doubt, select LIB_RAND.
	135
	136	config LIB_RAND
	137	bool "Pseudo-random library support"
	138
	139	config LIB_HW_RAND
	140	bool "HW Engine for random libray support"
	141
	142	endchoice
9ba9e85f	143
ab4458bd SG	144	config SPL_TINY_MEMSET
	145	bool "Use a very small memset() in SPL"
	146	help
	147	The faster memset() is the arch-specific one (if available) enabled
	148	by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get
	149	better performance by writing a word at a time. But in very
6e705114	150	size-constrained environments even this may be too big. Enable this
ab4458bd SG	151	option to reduce code size slightly at the cost of some speed.
ab4458bd SG	152
96b9082c PT	153	config TPL_TINY_MEMSET
	154	bool "Use a very small memset() in TPL"
	155	help
	156	The faster memset() is the arch-specific one (if available) enabled
	157	by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get
	158	better performance by writing a word at a time. But in very
6e705114	159	size-constrained environments even this may be too big. Enable this
96b9082c PT	160	option to reduce code size slightly at the cost of some speed.
96b9082c PT	161
aa049152 BB	162	config RBTREE
	163	bool
	164
da5337a6 NH	165	config BITREVERSE
	166	bool "Bit reverse library from Linux"
	167
d1389403 SG	168	source lib/dhry/Kconfig
d1389403 SG	169
b1a873df SG	170	menu "Security support"
	171
	172	config AES
	173	bool "Support the AES algorithm"
	174	help
	175	This provides a means to encrypt and decrypt data using the AES
	176	(Advanced Encryption Standard). This algorithm uses a symetric key
	177	and is widely used as a streaming cipher. Different key lengths are
	178	supported by the algorithm but only a 128-bit key is supported at
	179	present.
	180
d9f23c7f	181	source lib/rsa/Kconfig
c4beb22f	182
a7d660bc SG	183	config TPM
a7d660bc SG	184	bool "Trusted Platform Module (TPM) Support"
2419cd16	185	depends on DM
a7d660bc SG	186	help
	187	This enables support for TPMs which can be used to provide security
	188	features for your board. The TPM can be connected via LPC or I2C
	189	and a sandbox TPM is provided for testing purposes. Use the 'tpm'
	190	command to interactive the TPM. Driver model support is provided
	191	for the low-level TPM interface, but only one TPM is supported at
	192	a time by the TPM library.
	193
6307896c SG	194	config SPL_TPM
	195	bool "Trusted Platform Module (TPM) Support in SPL"
	196	depends on SPL_DM
	197	help
	198	This enables support for TPMs which can be used to provide security
	199	features for your board. The TPM can be connected via LPC or I2C
	200	and a sandbox TPM is provided for testing purposes. Use the 'tpm'
	201	command to interactive the TPM. Driver model support is provided
	202	for the low-level TPM interface, but only one TPM is supported at
	203	a time by the TPM library.
	204
	205	config TPL_TPM
	206	bool "Trusted Platform Module (TPM) Support in TPL"
	207	depends on TPL_DM
	208	help
	209	This enables support for TPMs which can be used to provide security
	210	features for your board. The TPM can be connected via LPC or I2C
	211	and a sandbox TPM is provided for testing purposes. Use the 'tpm'
	212	command to interactive the TPM. Driver model support is provided
	213	for the low-level TPM interface, but only one TPM is supported at
	214	a time by the TPM library.
	215
b1a873df SG	216	endmenu
b1a873df SG	217
3330584d IO	218	menu "Android Verified Boot"
	219
	220	config LIBAVB
	221	bool "Android Verified Boot 2.0 support"
	222	depends on ANDROID_BOOT_IMAGE
	223	default n
	224	help
	225	This enables support of Android Verified Boot 2.0 which can be used
	226	to assure the end user of the integrity of the software running on a
	227	device. Introduces such features as boot chain of trust, rollback
	228	protection etc.
	229
	230	endmenu
	231
94e3c8c4	232	menu "Hashing Support"
	233
	234	config SHA1
	235	bool "Enable SHA1 support"
	236	help
	237	This option enables support of hashing using SHA1 algorithm.
	238	The hash is calculated in software.
	239	The SHA1 algorithm produces a 160-bit (20-byte) hash value
	240	(digest).
	241
	242	config SHA256
	243	bool "Enable SHA256 support"
	244	help
	245	This option enables support of hashing using SHA256 algorithm.
	246	The hash is calculated in software.
	247	The SHA256 algorithm produces a 256-bit (32-byte) hash value
	248	(digest).
	249
	250	config SHA_HW_ACCEL
	251	bool "Enable hashing using hardware"
	252	help
	253	This option enables hardware acceleration
	254	for SHA1/SHA256 hashing.
	255	This affects the 'hash' command and also the
	256	hash_lookup_algo() function.
	257
	258	config SHA_PROG_HW_ACCEL
	259	bool "Enable Progressive hashing support using hardware"
	260	depends on SHA_HW_ACCEL
	261	help
	262	This option enables hardware-acceleration for
	263	SHA1/SHA256 progressive hashing.
	264	Data can be streamed in a block at a time and the hashing
	265	is performed in hardware.
bea79d7d AP	266
	267	config MD5
	268	bool
	269
85d8bf57 MB	270	config CRC32C
	271	bool
	272
94e3c8c4	273	endmenu
94e3c8c4	274
027b728d JW	275	menu "Compression Support"
	276
	277	config LZ4
	278	bool "Enable LZ4 decompression support"
	279	help
	280	If this option is set, support for LZ4 compressed images
	281	is included. The LZ4 algorithm can run in-place as long as the
	282	compressed image is loaded to the end of the output buffer, and
	283	trades lower compression ratios for much faster decompression.
	284
	285	NOTE: This implements the release version of the LZ4 frame
	286	format as generated by default by the 'lz4' command line tool.
	287	This is not the same as the outdated, less efficient legacy
	288	frame format currently (2015) implemented in the Linux kernel
	289	(generated by 'lz4 -l'). The two formats are incompatible.
	290
aed998aa SG	291	config LZMA
	292	bool "Enable LZMA decompression support"
	293	help
	294	This enables support for LZMA (Lempel-Ziv-Markov chain algorithm),
	295	a dictionary compression algorithm that provides a high compression
	296	ratio and fairly fast decompression speed. See also
	297	CONFIG_CMD_LZMADEC which provides a decode command.
	298
173aafbf	299	config LZO
d56b4b19 TR	300	bool "Enable LZO decompression support"
	301	help
	302	This enables support for LZO compression algorithm.r
7264f292	303
95f4bbd5 MV	304	config GZIP
	305	bool "Enable gzip decompression support for SPL build"
	306	select ZLIB
	307	default y
	308	help
	309	This enables support for GZIP compression algorithm.
	310
	311	config ZLIB
	312	bool
	313	default y
	314	help
	315	This enables ZLIB compression lib.
	316
048c6e89 SG	317	config SPL_LZ4
	318	bool "Enable LZ4 decompression support in SPL"
	319	help
	320	This enables support for tge LZ4 decompression algorithm in SPL. LZ4
	321	is a lossless data compression algorithm that is focused on
	322	fast compression and decompression speed. It belongs to the LZ77
	323	family of byte-oriented compression schemes.
	324
f52bdf4b JJH	325	config SPL_LZO
	326	bool "Enable LZO decompression support in SPL"
	327	help
	328	This enables support for LZO compression algorithm in the SPL.
	329
7264f292 YS	330	config SPL_GZIP
	331	bool "Enable gzip decompression support for SPL build"
	332	select SPL_ZLIB
	333	help
	334	This enables support for GZIP compression altorithm for SPL boot.
	335
	336	config SPL_ZLIB
	337	bool
	338	help
	339	This enables compression lib for SPL boot.
	340
027b728d JW	341	endmenu
027b728d JW	342
6501ff62 PM	343	config ERRNO_STR
	344	bool "Enable function for getting errno-related string message"
	345	help
	346	The function errno_str(int errno), returns a pointer to the errno
	347	corresponding text message:
	348	- if errno is null or positive number - a pointer to "Success" message
	349	- if errno is negative - a pointer to errno related message
	350
f8c987f8 AB	351	config HEXDUMP
	352	bool "Enable hexdump"
	353	help
	354	This enables functions for printing dumps of binary data.
	355
69e173eb SG	356	config OF_LIBFDT
	357	bool "Enable the FDT library"
	358	default y if OF_CONTROL
	359	help
	360	This enables the FDT library (libfdt). It provides functions for
	361	accessing binary device tree images in memory, such as adding and
f1a7ba1d	362	removing nodes and properties, scanning through the tree and finding
69e173eb SG	363	particular compatible nodes. The library operates on a flattened
	364	version of the device tree.
	365
ddf67f71 MR	366	config OF_LIBFDT_OVERLAY
ddf67f71 MR	367	bool "Enable the FDT library overlay support"
6417572e	368	depends on OF_LIBFDT
58a46f88	369	default y if ARCH_OMAP2PLUS \|\| ARCH_KEYSTONE
ddf67f71 MR	370	help
	371	This enables the FDT library (libfdt) overlay support.
	372
aa34fbc0 SG	373	config SPL_OF_LIBFDT
	374	bool "Enable the FDT library for SPL"
	375	default y if SPL_OF_CONTROL
	376	help
	377	This enables the FDT library (libfdt). It provides functions for
	378	accessing binary device tree images in memory, such as adding and
f1a7ba1d	379	removing nodes and properties, scanning through the tree and finding
aa34fbc0 SG	380	particular compatible nodes. The library operates on a flattened
	381	version of the device tree.
	382
5592a633 SG	383	config TPL_OF_LIBFDT
	384	bool "Enable the FDT library for TPL"
	385	default y if TPL_OF_CONTROL
	386	help
	387	This enables the FDT library (libfdt). It provides functions for
	388	accessing binary device tree images in memory, such as adding and
	389	removing nodes and properties, scanning through the tree and finding
	390	particular compatible nodes. The library operates on a flattened
	391	version of the device tree.
	392
ebf7fff2 HS	393	config FDT_FIXUP_PARTITIONS
	394	bool "overwrite MTD partitions in DTS through defined in 'mtdparts'"
	395	depends on OF_LIBFDT
ab948cd2	396	depends on CMD_MTDPARTS
ebf7fff2 HS	397	help
	398	Allow overwriting defined partitions in the device tree blob
	399	using partition info defined in the 'mtdparts' environment
	400	variable.
	401
4b6dddc2	402	menu "System tables"
e663b350	403	depends on (!EFI && !SYS_COREBOOT) \|\| (ARM && EFI_LOADER)
4b6dddc2 AG	404
	405	config GENERATE_SMBIOS_TABLE
	406	bool "Generate an SMBIOS (System Management BIOS) table"
	407	default y
e663b350	408	depends on X86 \|\| EFI_LOADER
4b6dddc2 AG	409	help
	410	The System Management BIOS (SMBIOS) specification addresses how
	411	motherboard and system vendors present management information about
	412	their products in a standard format by extending the BIOS interface
	413	on Intel architecture systems.
	414
	415	Check http://www.dmtf.org/standards/smbios for details.
	416
	417	config SMBIOS_MANUFACTURER
	418	string "SMBIOS Manufacturer"
	419	depends on GENERATE_SMBIOS_TABLE
	420	default SYS_VENDOR
	421	help
	422	The board manufacturer to store in SMBIOS structures.
	423	Change this to override the default one (CONFIG_SYS_VENDOR).
	424
	425	config SMBIOS_PRODUCT_NAME
	426	string "SMBIOS Product Name"
	427	depends on GENERATE_SMBIOS_TABLE
	428	default SYS_BOARD
	429	help
	430	The product name to store in SMBIOS structures.
	431	Change this to override the default one (CONFIG_SYS_BOARD).
	432
	433	endmenu
	434
867a6ac8	435	source lib/efi/Kconfig
ed980b8c	436	source lib/efi_loader/Kconfig
32ce6179	437	source lib/optee/Kconfig
867a6ac8	438
ed36323f	439	endmenu