]>
Commit | Line | Data |
---|---|---|
f91c09ac MV |
1 | /* |
2 | * Configuration settings for the Novena U-boot. | |
3 | * | |
4 | * Copyright (C) 2014 Marek Vasut <[email protected]> | |
5 | * | |
6 | * SPDX-License-Identifier: GPL-2.0+ | |
7 | */ | |
8 | ||
9 | #ifndef __CONFIG_H | |
10 | #define __CONFIG_H | |
11 | ||
12 | /* System configurations */ | |
f91c09ac | 13 | #define CONFIG_BOARD_EARLY_INIT_F |
331ae846 | 14 | #define CONFIG_BOARD_LATE_INIT |
f91c09ac | 15 | #define CONFIG_MISC_INIT_R |
f91c09ac MV |
16 | #define CONFIG_FIT |
17 | #define CONFIG_KEYBOARD | |
f91c09ac | 18 | |
60667a53 | 19 | #include "mx6_common.h" |
f91c09ac MV |
20 | |
21 | /* U-Boot Commands */ | |
22 | #define CONFIG_CMD_ASKENV | |
23 | #define CONFIG_CMD_BMODE | |
f91c09ac MV |
24 | #define CONFIG_CMD_CACHE |
25 | #define CONFIG_CMD_DHCP | |
26 | #define CONFIG_CMD_EEPROM | |
f91c09ac MV |
27 | #define CONFIG_CMD_I2C |
28 | #define CONFIG_CMD_FUSE | |
29 | #define CONFIG_CMD_MII | |
f91c09ac MV |
30 | #define CONFIG_CMD_NET |
31 | #define CONFIG_CMD_PCI | |
32 | #define CONFIG_CMD_PING | |
33 | #define CONFIG_CMD_SATA | |
34 | #define CONFIG_CMD_SETEXPR | |
35 | #define CONFIG_CMD_TIME | |
36 | #define CONFIG_CMD_USB | |
37 | #define CONFIG_VIDEO | |
38 | ||
39 | /* U-Boot general configurations */ | |
f91c09ac | 40 | #define CONFIG_VERSION_VARIABLE /* U-BOOT version */ |
f91c09ac MV |
41 | |
42 | /* U-Boot environment */ | |
f91c09ac MV |
43 | #define CONFIG_ENV_SIZE (16 * 1024) |
44 | /* | |
45 | * Environment is on MMC, starting at offset 512KiB from start of the card. | |
46 | * Please place first partition at offset 1MiB from the start of the card | |
47 | * as recommended by GNU/fdisk. See below for details: | |
48 | * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html | |
49 | */ | |
50 | #ifdef CONFIG_CMD_MMC | |
51 | #define CONFIG_ENV_IS_IN_MMC | |
52 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
53 | #define CONFIG_ENV_OFFSET (512 * 1024) | |
54 | #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE | |
55 | #define CONFIG_ENV_OFFSET_REDUND \ | |
56 | (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) | |
57 | #else | |
58 | #define CONFIG_ENV_IS_NOWHERE | |
59 | #endif | |
60 | ||
61 | /* Booting Linux */ | |
f91c09ac MV |
62 | #define CONFIG_BOOTFILE "fitImage" |
63 | #define CONFIG_BOOTARGS "console=ttymxc1,115200 " | |
64 | #define CONFIG_BOOTCOMMAND "run net_nfs" | |
f91c09ac MV |
65 | #define CONFIG_HOSTNAME novena |
66 | ||
67 | /* Physical Memory Map */ | |
68 | #define CONFIG_NR_DRAM_BANKS 1 | |
69 | #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR | |
70 | #define PHYS_SDRAM_SIZE 0xF0000000 | |
71 | ||
72 | #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM | |
73 | #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR | |
74 | #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE | |
75 | ||
76 | #define CONFIG_SYS_INIT_SP_OFFSET \ | |
77 | (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) | |
78 | #define CONFIG_SYS_INIT_SP_ADDR \ | |
79 | (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) | |
80 | ||
81 | #define CONFIG_SYS_MEMTEST_START 0x10000000 | |
82 | #define CONFIG_SYS_MEMTEST_END 0x20000000 | |
83 | ||
84 | #define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) | |
85 | ||
86 | /* SPL */ | |
87 | #define CONFIG_SPL_FAT_SUPPORT | |
88 | #define CONFIG_SPL_MMC_SUPPORT | |
89 | #include "imx6_spl.h" /* common IMX6 SPL configuration */ | |
90 | ||
f91c09ac MV |
91 | /* Ethernet Configuration */ |
92 | #ifdef CONFIG_CMD_NET | |
93 | #define CONFIG_FEC_MXC | |
94 | #define CONFIG_MII | |
95 | #define IMX_FEC_BASE ENET_BASE_ADDR | |
96 | #define CONFIG_FEC_XCV_TYPE RGMII | |
97 | #define CONFIG_ETHPRIME "FEC" | |
98 | #define CONFIG_FEC_MXC_PHYADDR 0x7 | |
99 | #define CONFIG_PHYLIB | |
100 | #define CONFIG_PHY_MICREL | |
101 | #define CONFIG_PHY_MICREL_KSZ9021 | |
102 | #define CONFIG_ARP_TIMEOUT 200UL | |
103 | #endif | |
104 | ||
105 | /* I2C */ | |
106 | #define CONFIG_SYS_I2C | |
107 | #define CONFIG_SYS_I2C_MXC | |
f8cb101e | 108 | #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ |
f91c09ac MV |
109 | #define CONFIG_I2C_MULTI_BUS |
110 | #define CONFIG_I2C_MXC | |
111 | #define CONFIG_SYS_I2C_SPEED 100000 | |
112 | ||
113 | /* I2C EEPROM */ | |
114 | #ifdef CONFIG_CMD_EEPROM | |
115 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 | |
116 | #define CONFIG_SYS_SPD_BUS_NUM 2 | |
117 | #endif | |
118 | ||
119 | /* MMC Configs */ | |
f91c09ac MV |
120 | #define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
121 | #define CONFIG_SYS_FSL_USDHC_NUM 2 | |
f91c09ac MV |
122 | |
123 | /* OCOTP Configs */ | |
124 | #ifdef CONFIG_CMD_FUSE | |
125 | #define CONFIG_MXC_OCOTP | |
126 | #endif | |
127 | ||
128 | /* PCI express */ | |
129 | #ifdef CONFIG_CMD_PCI | |
130 | #define CONFIG_PCI | |
131 | #define CONFIG_PCI_PNP | |
132 | #define CONFIG_PCI_SCAN_SHOW | |
133 | #define CONFIG_PCIE_IMX | |
134 | #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29) | |
135 | #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12) | |
136 | #endif | |
137 | ||
138 | /* PMIC */ | |
139 | #define CONFIG_POWER | |
140 | #define CONFIG_POWER_I2C | |
141 | #define CONFIG_POWER_PFUZE100 | |
142 | #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 | |
143 | ||
144 | /* SATA Configs */ | |
145 | #ifdef CONFIG_CMD_SATA | |
146 | #define CONFIG_DWC_AHSATA | |
147 | #define CONFIG_SYS_SATA_MAX_DEVICE 1 | |
148 | #define CONFIG_DWC_AHSATA_PORT_ID 0 | |
149 | #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR | |
150 | #define CONFIG_LBA48 | |
151 | #define CONFIG_LIBATA | |
152 | #endif | |
153 | ||
154 | /* UART */ | |
155 | #define CONFIG_MXC_UART | |
156 | #define CONFIG_MXC_UART_BASE UART2_BASE | |
f91c09ac MV |
157 | |
158 | /* USB Configs */ | |
159 | #ifdef CONFIG_CMD_USB | |
160 | #define CONFIG_USB_EHCI | |
161 | #define CONFIG_USB_EHCI_MX6 | |
162 | #define CONFIG_USB_STORAGE | |
163 | #define CONFIG_USB_KEYBOARD | |
164 | #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP | |
165 | #define CONFIG_USB_HOST_ETHER | |
166 | #define CONFIG_USB_ETHER_ASIX | |
167 | #define CONFIG_USB_ETHER_SMSC95XX | |
168 | #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 | |
169 | #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) | |
170 | #define CONFIG_MXC_USB_FLAGS 0 | |
171 | /* Gadget part */ | |
172 | #define CONFIG_CI_UDC | |
173 | #define CONFIG_USBD_HS | |
174 | #define CONFIG_USB_GADGET_DUALSPEED | |
175 | #define CONFIG_USB_ETHER | |
176 | #define CONFIG_USB_ETH_CDC | |
177 | #define CONFIG_NETCONSOLE | |
178 | #endif | |
179 | ||
180 | /* Video output */ | |
181 | #ifdef CONFIG_VIDEO | |
f91c09ac MV |
182 | #define CONFIG_VIDEO_IPUV3 |
183 | #define CONFIG_CFB_CONSOLE | |
184 | #define CONFIG_VGA_AS_SINGLE_DEVICE | |
185 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV | |
186 | #define CONFIG_VIDEO_BMP_RLE8 | |
187 | #define CONFIG_SPLASH_SCREEN | |
188 | #define CONFIG_BMP_16BPP | |
189 | #define CONFIG_VIDEO_LOGO | |
190 | #define CONFIG_IPUV3_CLK 260000000 | |
191 | #define CONFIG_CMD_HDMIDETECT | |
192 | #define CONFIG_CONSOLE_MUX | |
193 | #define CONFIG_IMX_HDMI | |
194 | #define CONFIG_IMX_VIDEO_SKIP | |
195 | #endif | |
196 | ||
197 | /* Extra U-Boot environment. */ | |
198 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
199 | "fdt_high=0xffffffff\0" \ | |
200 | "initrd_high=0xffffffff\0" \ | |
201 | "consdev=ttymxc1\0" \ | |
202 | "baudrate=115200\0" \ | |
203 | "bootdev=/dev/mmcblk0p1\0" \ | |
204 | "rootdev=/dev/mmcblk0p2\0" \ | |
205 | "netdev=eth0\0" \ | |
206 | "kernel_addr_r=0x18000000\0" \ | |
207 | "addcons=" \ | |
208 | "setenv bootargs ${bootargs} " \ | |
209 | "console=${consdev},${baudrate}\0" \ | |
210 | "addip=" \ | |
211 | "setenv bootargs ${bootargs} " \ | |
212 | "ip=${ipaddr}:${serverip}:${gatewayip}:" \ | |
213 | "${netmask}:${hostname}:${netdev}:off\0" \ | |
214 | "addmisc=" \ | |
215 | "setenv bootargs ${bootargs} ${miscargs}\0" \ | |
216 | "addargs=run addcons addmisc\0" \ | |
217 | "mmcload=" \ | |
218 | "mmc rescan ; " \ | |
219 | "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \ | |
220 | "netload=" \ | |
221 | "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \ | |
222 | "miscargs=nohlt panic=1\0" \ | |
223 | "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \ | |
224 | "nfsargs=" \ | |
225 | "setenv bootargs root=/dev/nfs rw " \ | |
226 | "nfsroot=${serverip}:${rootpath},v3,tcp\0" \ | |
227 | "mmc_mmc=" \ | |
228 | "run mmcload mmcargs addargs ; " \ | |
229 | "bootm ${kernel_addr_r}\0" \ | |
230 | "mmc_nfs=" \ | |
231 | "run mmcload nfsargs addip addargs ; " \ | |
232 | "bootm ${kernel_addr_r}\0" \ | |
233 | "net_mmc=" \ | |
234 | "run netload mmcargs addargs ; " \ | |
235 | "bootm ${kernel_addr_r}\0" \ | |
236 | "net_nfs=" \ | |
237 | "run netload nfsargs addip addargs ; " \ | |
238 | "bootm ${kernel_addr_r}\0" \ | |
239 | "update_sd_spl_filename=SPL\0" \ | |
240 | "update_sd_uboot_filename=u-boot.img\0" \ | |
241 | "update_sd_firmware=" /* Update the SD firmware partition */ \ | |
242 | "if mmc rescan ; then " \ | |
243 | "if dhcp ${update_sd_spl_filename} ; then " \ | |
244 | "mmc write ${loadaddr} 2 0x200 ; " \ | |
245 | "fi ; " \ | |
246 | "if dhcp ${update_sd_uboot_filename} ; then " \ | |
247 | "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\ | |
248 | "fi ; " \ | |
249 | "fi\0" \ | |
250 | ||
251 | #endif /* __CONFIG_H */ |