[J-u-boot.git] / include / status_led.h

/*
 * (C) Copyright 2000-2004
 * Wolfgang Denk, DENX Software Engineering, [email protected].
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * The purpose of this code is to signal the operational status of a
 * target which usually boots over the network; while running in
 * PCBoot, a status LED is blinking. As soon as a valid BOOTP reply
 * message has been received, the LED is turned off. The Linux
 * kernel, once it is running, will start blinking the LED again,
 * with another frequency.
 */

#ifndef _STATUS_LED_H_
#define	_STATUS_LED_H_

#ifdef CONFIG_STATUS_LED

#define STATUS_LED_OFF		0
#define STATUS_LED_BLINKING	1
#define STATUS_LED_ON		2

void status_led_tick (unsigned long timestamp);
void status_led_set  (int led, int state);

/*****  TQM8xxL  ********************************************************/
#if defined(CONFIG_TQM8xxL)
# define STATUS_LED_PAR		im_cpm.cp_pbpar
# define STATUS_LED_DIR		im_cpm.cp_pbdir
# define STATUS_LED_ODR		im_cpm.cp_pbodr
# define STATUS_LED_DAT		im_cpm.cp_pbdat

# define STATUS_LED_BIT		0x00000001
# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE	STATUS_LED_BLINKING

# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/

# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */

/*****  MVS v1  **********************************************************/
#elif (defined(CONFIG_MVS) && CONFIG_MVS < 2)
# define STATUS_LED_PAR		im_ioport.iop_pdpar
# define STATUS_LED_DIR		im_ioport.iop_pddir
# undef  STATUS_LED_ODR
# define STATUS_LED_DAT		im_ioport.iop_pddat

# define STATUS_LED_BIT		0x00000001
# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE	STATUS_LED_BLINKING

# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/

# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */

/*****  ETX_094  ********************************************************/
#elif defined(CONFIG_ETX094)

# define STATUS_LED_PAR		im_ioport.iop_pdpar
# define STATUS_LED_DIR		im_ioport.iop_pddir
# undef  STATUS_LED_ODR
# define STATUS_LED_DAT		im_ioport.iop_pddat

# define STATUS_LED_BIT		0x00000001
# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE	STATUS_LED_BLINKING

# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/

# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */

/*****  GEN860T  *********************************************************/
#elif defined(CONFIG_GEN860T)

# define STATUS_LED_PAR			im_ioport.iop_papar
# define STATUS_LED_DIR			im_ioport.iop_padir
# define STATUS_LED_ODR			im_ioport.iop_paodr
# define STATUS_LED_DAT			im_ioport.iop_padat

# define STATUS_LED_BIT			0x0800	/* Red LED 0 is on PA.4	*/
# define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 4)
# define STATUS_LED_STATE		STATUS_LED_OFF
# define STATUS_LED_BIT1		0x0400	/* Grn LED 1 is on PA.5	*/
# define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 8)
# define STATUS_LED_STATE1		STATUS_LED_BLINKING
# define STATUS_LED_BIT2		0x0080	/* Red LED 2 is on PA.8	*/
# define STATUS_LED_PERIOD2		(CONFIG_SYS_HZ / 4)
# define STATUS_LED_STATE2		STATUS_LED_OFF
# define STATUS_LED_BIT3		0x0040	/* Grn LED 3 is on PA.9	*/
# define STATUS_LED_PERIOD3		(CONFIG_SYS_HZ / 4)
# define STATUS_LED_STATE3		STATUS_LED_OFF

# define STATUS_LED_ACTIVE		1	/* LED on for bit == 1	*/
# define STATUS_LED_BOOT		1	/* Boot status on LED 1	*/

/*****  IVMS8  **********************************************************/
#elif defined(CONFIG_IVMS8)

# define STATUS_LED_PAR		im_cpm.cp_pbpar
# define STATUS_LED_DIR		im_cpm.cp_pbdir
# define STATUS_LED_ODR		im_cpm.cp_pbodr
# define STATUS_LED_DAT		im_cpm.cp_pbdat

# define STATUS_LED_BIT		0x00000010	/* LED 0 is on PB.27	*/
# define STATUS_LED_PERIOD	(1 * CONFIG_SYS_HZ)
# define STATUS_LED_STATE	STATUS_LED_OFF
# define STATUS_LED_BIT1	0x00000020	/* LED 1 is on PB.26	*/
# define STATUS_LED_PERIOD1	(1 * CONFIG_SYS_HZ)
# define STATUS_LED_STATE1	STATUS_LED_OFF
/* IDE LED usable for other purposes, too */
# define STATUS_LED_BIT2	0x00000008	/* LED 2 is on PB.28	*/
# define STATUS_LED_PERIOD2	(1 * CONFIG_SYS_HZ)
# define STATUS_LED_STATE2	STATUS_LED_OFF

# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/

# define STATUS_ILOCK_SWITCH	0x00800000	/* ILOCK switch in IRQ4	*/

# define STATUS_ILOCK_PERIOD	(CONFIG_SYS_HZ / 10)	/* about every 100 ms	*/

# define STATUS_LED_YELLOW	0
# define STATUS_LED_GREEN	1
# define STATUS_LED_BOOT	2		/* IDE LED used for boot status */

/*****  IVML24  *********************************************************/
#elif defined(CONFIG_IVML24)

# define STATUS_LED_PAR		im_cpm.cp_pbpar
# define STATUS_LED_DIR		im_cpm.cp_pbdir
# define STATUS_LED_ODR		im_cpm.cp_pbodr
# define STATUS_LED_DAT		im_cpm.cp_pbdat

# define STATUS_LED_BIT		0x00000010	/* LED 0 is on PB.27	*/
# define STATUS_LED_PERIOD	(1 * CONFIG_SYS_HZ)
# define STATUS_LED_STATE	STATUS_LED_OFF
# define STATUS_LED_BIT1	0x00000020	/* LED 1 is on PB.26	*/
# define STATUS_LED_PERIOD1	(1 * CONFIG_SYS_HZ)
# define STATUS_LED_STATE1	STATUS_LED_OFF
/* IDE LED usable for other purposes, too */
# define STATUS_LED_BIT2	0x00000008	/* LED 2 is on PB.28	*/
# define STATUS_LED_PERIOD2	(1 * CONFIG_SYS_HZ)
# define STATUS_LED_STATE2	STATUS_LED_OFF

# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/

# define STATUS_ILOCK_SWITCH	0x00004000	/* ILOCK is on PB.17	*/

# define STATUS_ILOCK_PERIOD	(CONFIG_SYS_HZ / 10)	/* about every 100 ms	*/

# define STATUS_LED_YELLOW	0
# define STATUS_LED_GREEN	1
# define STATUS_LED_BOOT	2		/* IDE LED used for boot status */

/*****  LANTEC  *********************************************************/
#elif defined(CONFIG_LANTEC)

# define STATUS_LED_PAR		im_ioport.iop_pdpar
# define STATUS_LED_DIR		im_ioport.iop_pddir
# undef  STATUS_LED_ODR
# define STATUS_LED_DAT		im_ioport.iop_pddat

# if CONFIG_LATEC < 2
#  define STATUS_LED_BIT	0x1000
# else
#  define STATUS_LED_BIT	0x0800
# endif
# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE	STATUS_LED_BLINKING

# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */

# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */

/*****  ICU862   ********************************************************/
#elif defined(CONFIG_ICU862)

# define STATUS_LED_PAR		im_ioport.iop_papar
# define STATUS_LED_DIR		im_ioport.iop_padir
# define STATUS_LED_ODR		im_ioport.iop_paodr
# define STATUS_LED_DAT		im_ioport.iop_padat

# define STATUS_LED_BIT		0x4000		/* LED 0 is on PA.1 */
# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE	STATUS_LED_BLINKING
# define STATUS_LED_BIT1	0x1000		/* LED 1 is on PA.3 */
# define STATUS_LED_PERIOD1	(CONFIG_SYS_HZ)
# define STATUS_LED_STATE1	STATUS_LED_OFF

# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/

# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */

/*****  Someone else defines these  *************************************/
#elif defined(STATUS_LED_PAR)

  /*
   * ADVICE: Define in your board configuration file rather than
   * filling this file up with lots of custom board stuff.
   */

/*****  NetVia   ********************************************************/
#elif defined(CONFIG_NETVIA)

#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1

#define STATUS_LED_PAR		im_ioport.iop_pdpar
#define STATUS_LED_DIR		im_ioport.iop_pddir
#undef  STATUS_LED_ODR
#define STATUS_LED_DAT		im_ioport.iop_pddat

# define STATUS_LED_BIT		0x0080			/* PD.8 */
# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE	STATUS_LED_BLINKING

# define STATUS_LED_BIT1	0x0040			/* PD.9 */
# define STATUS_LED_PERIOD1	(CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE1	STATUS_LED_OFF

# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */

#endif

/*****  CMI   ********************************************************/
#elif defined(CONFIG_CMI)
# define STATUS_LED_DIR		im_mios.mios_mpiosm32ddr
# define STATUS_LED_DAT		im_mios.mios_mpiosm32dr

# define STATUS_LED_BIT		0x2000		/* Select one of the 16 possible*/
						/* MIOS outputs */
# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)	/* Blinking periode is 500 ms */
# define STATUS_LED_STATE	STATUS_LED_BLINKING

# define STATUS_LED_ACTIVE	1		/* LED on for bit == 0	*/
# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */

/*****  KUP4K, KUP4X  ****************************************************/
#elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)

# define STATUS_LED_PAR		im_ioport.iop_papar
# define STATUS_LED_DIR		im_ioport.iop_padir
# define STATUS_LED_ODR		im_ioport.iop_paodr
# define STATUS_LED_DAT		im_ioport.iop_padat

# define STATUS_LED_BIT		0x00000300  /*  green + red    PA[8]=yellow,  PA[7]=red,  PA[6]=green */
# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE	STATUS_LED_BLINKING

# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/

# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */

#elif defined(CONFIG_SVM_SC8xx)
# define STATUS_LED_PAR         im_cpm.cp_pbpar
# define STATUS_LED_DIR         im_cpm.cp_pbdir
# define STATUS_LED_ODR         im_cpm.cp_pbodr
# define STATUS_LED_DAT         im_cpm.cp_pbdat

# define STATUS_LED_BIT         0x00000001
# define STATUS_LED_PERIOD      (CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE       STATUS_LED_BLINKING

# define STATUS_LED_ACTIVE      1               /* LED on for bit == 1  */

# define STATUS_LED_BOOT        0               /* LED 0 used for boot status */

/*****  RBC823    ********************************************************/
#elif defined(CONFIG_RBC823)

# define STATUS_LED_PAR         im_ioport.iop_pcpar
# define STATUS_LED_DIR         im_ioport.iop_pcdir
#  undef STATUS_LED_ODR
# define STATUS_LED_DAT         im_ioport.iop_pcdat

# define STATUS_LED_BIT         0x0002          /* LED 0 is on PC.14 */
# define STATUS_LED_PERIOD      (CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE       STATUS_LED_BLINKING
# define STATUS_LED_BIT1        0x0004          /* LED 1 is on PC.13 */
# define STATUS_LED_PERIOD1     (CONFIG_SYS_HZ)
# define STATUS_LED_STATE1      STATUS_LED_OFF

# define STATUS_LED_ACTIVE      1               /* LED on for bit == 1  */

# define STATUS_LED_BOOT        0               /* LED 0 used for boot status */

/*****  NetPhone   ********************************************************/
#elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
/* XXX empty just to avoid the error */
/*****  STx XTc    ********************************************************/
#elif defined(CONFIG_STXXTC)
/* XXX empty just to avoid the error */
/*****  sbc8240   ********************************************************/
#elif defined(CONFIG_WRSBC8240)
/* XXX empty just to avoid the error */
/************************************************************************/
#elif defined(CONFIG_NIOS2)
/* XXX empty just to avoid the error */
/************************************************************************/
#elif defined(CONFIG_V38B)

# define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */
# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
# define STATUS_LED_STATE	STATUS_LED_BLINKING

# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */
# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */

#elif defined(CONFIG_MOTIONPRO)

#define STATUS_LED_BIT		((vu_long *) MPC5XXX_GPT6_ENABLE)
#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 10)
#define STATUS_LED_STATE	STATUS_LED_BLINKING

#define STATUS_LED_BIT1		((vu_long *) MPC5XXX_GPT7_ENABLE)
#define STATUS_LED_PERIOD1	(CONFIG_SYS_HZ / 10)
#define STATUS_LED_STATE1	STATUS_LED_OFF

#define STATUS_LED_BOOT		0	/* LED 0 used for boot status */

#elif defined(CONFIG_BOARD_SPECIFIC_LED)
/* led_id_t is unsigned long mask */
typedef unsigned long led_id_t;

extern void __led_toggle (led_id_t mask);
extern void __led_init (led_id_t mask, int state);
extern void __led_set (led_id_t mask, int state);
#else
# error Status LED configuration missing
#endif
/************************************************************************/

#ifndef CONFIG_BOARD_SPECIFIC_LED
# include <asm/status_led.h>
#endif

/*
 * Coloured LEDs API
 */
#ifndef	__ASSEMBLY__
extern void	coloured_LED_init (void);
extern void	red_LED_on(void);
extern void	red_LED_off(void);
extern void	green_LED_on(void);
extern void	green_LED_off(void);
extern void	yellow_LED_on(void);
extern void	yellow_LED_off(void);
extern void	blue_LED_on(void);
extern void	blue_LED_off(void);
#else
	.extern LED_init
	.extern red_LED_on
	.extern red_LED_off
	.extern yellow_LED_on
	.extern yellow_LED_off
	.extern green_LED_on
	.extern green_LED_off
	.extern blue_LED_on
	.extern blue_LED_off
#endif

#endif	/* CONFIG_STATUS_LED	*/

#endif	/* _STATUS_LED_H_	*/
Commit	Line	Data
c609719b	1	/*
04a85b3b	2	* (C) Copyright 2000-2004
c609719b WD	3	* Wolfgang Denk, DENX Software Engineering, [email protected].
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* The purpose of this code is to signal the operational status of a
	26	* target which usually boots over the network; while running in
	27	* PCBoot, a status LED is blinking. As soon as a valid BOOTP reply
	28	* message has been received, the LED is turned off. The Linux
	29	* kernel, once it is running, will start blinking the LED again,
	30	* with another frequency.
	31	*/
	32
	33	#ifndef _STATUS_LED_H_
	34	#define _STATUS_LED_H_
	35
	36	#ifdef CONFIG_STATUS_LED
	37
	38	#define STATUS_LED_OFF 0
	39	#define STATUS_LED_BLINKING 1
	40	#define STATUS_LED_ON 2
	41
	42	void status_led_tick (unsigned long timestamp);
	43	void status_led_set (int led, int state);
	44
	45	/*** TQM8xxL ******************************************************/
77efe35f	46	#if defined(CONFIG_TQM8xxL)
c609719b WD	47	# define STATUS_LED_PAR im_cpm.cp_pbpar
	48	# define STATUS_LED_DIR im_cpm.cp_pbdir
	49	# define STATUS_LED_ODR im_cpm.cp_pbodr
	50	# define STATUS_LED_DAT im_cpm.cp_pbdat
	51
	52	# define STATUS_LED_BIT 0x00000001
6d0f6bcf	53	# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
c609719b WD	54	# define STATUS_LED_STATE STATUS_LED_BLINKING
	55
	56	# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
	57
	58	# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
	59
	60	/*** MVS v1 ********************************************************/
	61	#elif (defined(CONFIG_MVS) && CONFIG_MVS < 2)
	62	# define STATUS_LED_PAR im_ioport.iop_pdpar
	63	# define STATUS_LED_DIR im_ioport.iop_pddir
	64	# undef STATUS_LED_ODR
	65	# define STATUS_LED_DAT im_ioport.iop_pddat
	66
	67	# define STATUS_LED_BIT 0x00000001
6d0f6bcf	68	# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
c609719b WD	69	# define STATUS_LED_STATE STATUS_LED_BLINKING
	70
	71	# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
	72
	73	# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
	74
	75	/*** ETX_094 ******************************************************/
	76	#elif defined(CONFIG_ETX094)
	77
	78	# define STATUS_LED_PAR im_ioport.iop_pdpar
	79	# define STATUS_LED_DIR im_ioport.iop_pddir
	80	# undef STATUS_LED_ODR
	81	# define STATUS_LED_DAT im_ioport.iop_pddat
	82
	83	# define STATUS_LED_BIT 0x00000001
6d0f6bcf	84	# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
c609719b WD	85	# define STATUS_LED_STATE STATUS_LED_BLINKING
	86
	87	# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
	88
	89	# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
	90
	91	/*** GEN860T *******************************************************/
	92	#elif defined(CONFIG_GEN860T)
	93
	94	# define STATUS_LED_PAR im_ioport.iop_papar
	95	# define STATUS_LED_DIR im_ioport.iop_padir
	96	# define STATUS_LED_ODR im_ioport.iop_paodr
	97	# define STATUS_LED_DAT im_ioport.iop_padat
	98
	99	# define STATUS_LED_BIT 0x0800 /* Red LED 0 is on PA.4 */
6d0f6bcf	100	# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
7aa78614	101	# define STATUS_LED_STATE STATUS_LED_OFF
c609719b	102	# define STATUS_LED_BIT1 0x0400 /* Grn LED 1 is on PA.5 */
6d0f6bcf	103	# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 8)
c609719b WD	104	# define STATUS_LED_STATE1 STATUS_LED_BLINKING
c609719b WD	105	# define STATUS_LED_BIT2 0x0080 /* Red LED 2 is on PA.8 */
6d0f6bcf	106	# define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 4)
7aa78614	107	# define STATUS_LED_STATE2 STATUS_LED_OFF
c609719b	108	# define STATUS_LED_BIT3 0x0040 /* Grn LED 3 is on PA.9 */
6d0f6bcf	109	# define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 4)
7aa78614	110	# define STATUS_LED_STATE3 STATUS_LED_OFF
c609719b WD	111
c609719b WD	112	# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
7aa78614	113	# define STATUS_LED_BOOT 1 /* Boot status on LED 1 */
c609719b WD	114
	115	/*** IVMS8 ********************************************************/
	116	#elif defined(CONFIG_IVMS8)
	117
	118	# define STATUS_LED_PAR im_cpm.cp_pbpar
	119	# define STATUS_LED_DIR im_cpm.cp_pbdir
	120	# define STATUS_LED_ODR im_cpm.cp_pbodr
	121	# define STATUS_LED_DAT im_cpm.cp_pbdat
	122
	123	# define STATUS_LED_BIT 0x00000010 /* LED 0 is on PB.27 */
6d0f6bcf	124	# define STATUS_LED_PERIOD (1 * CONFIG_SYS_HZ)
c609719b WD	125	# define STATUS_LED_STATE STATUS_LED_OFF
c609719b WD	126	# define STATUS_LED_BIT1 0x00000020 /* LED 1 is on PB.26 */
6d0f6bcf	127	# define STATUS_LED_PERIOD1 (1 * CONFIG_SYS_HZ)
c609719b WD	128	# define STATUS_LED_STATE1 STATUS_LED_OFF
	129	/* IDE LED usable for other purposes, too */
	130	# define STATUS_LED_BIT2 0x00000008 /* LED 2 is on PB.28 */
6d0f6bcf	131	# define STATUS_LED_PERIOD2 (1 * CONFIG_SYS_HZ)
c609719b WD	132	# define STATUS_LED_STATE2 STATUS_LED_OFF
	133
	134	# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
	135
	136	# define STATUS_ILOCK_SWITCH 0x00800000 /* ILOCK switch in IRQ4 */
	137
6d0f6bcf	138	# define STATUS_ILOCK_PERIOD (CONFIG_SYS_HZ / 10) /* about every 100 ms */
c609719b WD	139
	140	# define STATUS_LED_YELLOW 0
	141	# define STATUS_LED_GREEN 1
	142	# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */
	143
	144	/*** IVML24 *******************************************************/
	145	#elif defined(CONFIG_IVML24)
	146
	147	# define STATUS_LED_PAR im_cpm.cp_pbpar
	148	# define STATUS_LED_DIR im_cpm.cp_pbdir
	149	# define STATUS_LED_ODR im_cpm.cp_pbodr
	150	# define STATUS_LED_DAT im_cpm.cp_pbdat
	151
	152	# define STATUS_LED_BIT 0x00000010 /* LED 0 is on PB.27 */
6d0f6bcf	153	# define STATUS_LED_PERIOD (1 * CONFIG_SYS_HZ)
c609719b WD	154	# define STATUS_LED_STATE STATUS_LED_OFF
c609719b WD	155	# define STATUS_LED_BIT1 0x00000020 /* LED 1 is on PB.26 */
6d0f6bcf	156	# define STATUS_LED_PERIOD1 (1 * CONFIG_SYS_HZ)
c609719b WD	157	# define STATUS_LED_STATE1 STATUS_LED_OFF
	158	/* IDE LED usable for other purposes, too */
	159	# define STATUS_LED_BIT2 0x00000008 /* LED 2 is on PB.28 */
6d0f6bcf	160	# define STATUS_LED_PERIOD2 (1 * CONFIG_SYS_HZ)
c609719b WD	161	# define STATUS_LED_STATE2 STATUS_LED_OFF
	162
	163	# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
	164
	165	# define STATUS_ILOCK_SWITCH 0x00004000 /* ILOCK is on PB.17 */
	166
6d0f6bcf	167	# define STATUS_ILOCK_PERIOD (CONFIG_SYS_HZ / 10) /* about every 100 ms */
c609719b WD	168
	169	# define STATUS_LED_YELLOW 0
	170	# define STATUS_LED_GREEN 1
	171	# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */
	172
	173	/*** LANTEC *******************************************************/
	174	#elif defined(CONFIG_LANTEC)
	175
	176	# define STATUS_LED_PAR im_ioport.iop_pdpar
	177	# define STATUS_LED_DIR im_ioport.iop_pddir
	178	# undef STATUS_LED_ODR
	179	# define STATUS_LED_DAT im_ioport.iop_pddat
	180
	181	# if CONFIG_LATEC < 2
	182	# define STATUS_LED_BIT 0x1000
	183	# else
	184	# define STATUS_LED_BIT 0x0800
	185	# endif
6d0f6bcf	186	# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
c609719b WD	187	# define STATUS_LED_STATE STATUS_LED_BLINKING
	188
	189	# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
	190
	191	# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
	192
c609719b WD	193	/*** ICU862 ******************************************************/
	194	#elif defined(CONFIG_ICU862)
	195
	196	# define STATUS_LED_PAR im_ioport.iop_papar
	197	# define STATUS_LED_DIR im_ioport.iop_padir
	198	# define STATUS_LED_ODR im_ioport.iop_paodr
	199	# define STATUS_LED_DAT im_ioport.iop_padat
	200
	201	# define STATUS_LED_BIT 0x4000 /* LED 0 is on PA.1 */
6d0f6bcf	202	# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
c609719b WD	203	# define STATUS_LED_STATE STATUS_LED_BLINKING
c609719b WD	204	# define STATUS_LED_BIT1 0x1000 /* LED 1 is on PA.3 */
6d0f6bcf	205	# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ)
c609719b WD	206	# define STATUS_LED_STATE1 STATUS_LED_OFF
	207
	208	# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
	209
	210	# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
	211
	212	/*** Someone else defines these ***********************************/
	213	#elif defined(STATUS_LED_PAR)
	214
	215	/*
	216	* ADVICE: Define in your board configuration file rather than
	217	* filling this file up with lots of custom board stuff.
	218	*/
	219
	220	/*** NetVia ******************************************************/
	221	#elif defined(CONFIG_NETVIA)
	222
993cad93 WD	223	#if !defined(CONFIG_NETVIA_VERSION) \|\| CONFIG_NETVIA_VERSION == 1
993cad93 WD	224
c609719b WD	225	#define STATUS_LED_PAR im_ioport.iop_pdpar
	226	#define STATUS_LED_DIR im_ioport.iop_pddir
	227	#undef STATUS_LED_ODR
	228	#define STATUS_LED_DAT im_ioport.iop_pddat
	229
	230	# define STATUS_LED_BIT 0x0080 /* PD.8 */
6d0f6bcf	231	# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
c609719b WD	232	# define STATUS_LED_STATE STATUS_LED_BLINKING
	233
	234	# define STATUS_LED_BIT1 0x0040 /* PD.9 */
6d0f6bcf	235	# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
c609719b WD	236	# define STATUS_LED_STATE1 STATUS_LED_OFF
	237
	238	# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
	239	# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
	240
993cad93	241	#endif
56f94be3	242
0db5bca8 WD	243	/*** CMI ******************************************************/
0db5bca8 WD	244	#elif defined(CONFIG_CMI)
8bde7f77 WD	245	# define STATUS_LED_DIR im_mios.mios_mpiosm32ddr
8bde7f77 WD	246	# define STATUS_LED_DAT im_mios.mios_mpiosm32dr
0db5bca8 WD	247
	248	# define STATUS_LED_BIT 0x2000 /* Select one of the 16 possible*/
	249	/* MIOS outputs */
6d0f6bcf	250	# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* Blinking periode is 500 ms */
0db5bca8 WD	251	# define STATUS_LED_STATE STATUS_LED_BLINKING
	252
	253	# define STATUS_LED_ACTIVE 1 /* LED on for bit == 0 */
	254	# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
	255
0608e04d	256	/*** KUP4K, KUP4X **************************************************/
dff07e18	257	#elif defined(CONFIG_KUP4K) \|\| defined(CONFIG_KUP4X)
56f94be3 WD	258
	259	# define STATUS_LED_PAR im_ioport.iop_papar
	260	# define STATUS_LED_DIR im_ioport.iop_padir
	261	# define STATUS_LED_ODR im_ioport.iop_paodr
	262	# define STATUS_LED_DAT im_ioport.iop_padat
	263
	264	# define STATUS_LED_BIT 0x00000300 /* green + red PA[8]=yellow, PA[7]=red, PA[6]=green */
6d0f6bcf	265	# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
56f94be3 WD	266	# define STATUS_LED_STATE STATUS_LED_BLINKING
	267
	268	# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
	269
	270	# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
	271
dc7c9a1a WD	272	#elif defined(CONFIG_SVM_SC8xx)
	273	# define STATUS_LED_PAR im_cpm.cp_pbpar
	274	# define STATUS_LED_DIR im_cpm.cp_pbdir
	275	# define STATUS_LED_ODR im_cpm.cp_pbodr
	276	# define STATUS_LED_DAT im_cpm.cp_pbdat
	277
	278	# define STATUS_LED_BIT 0x00000001
6d0f6bcf	279	# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
dc7c9a1a WD	280	# define STATUS_LED_STATE STATUS_LED_BLINKING
	281
	282	# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
	283
	284	# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
	285
682011ff WD	286	/*** RBC823 ******************************************************/
	287	#elif defined(CONFIG_RBC823)
	288
	289	# define STATUS_LED_PAR im_ioport.iop_pcpar
	290	# define STATUS_LED_DIR im_ioport.iop_pcdir
	291	# undef STATUS_LED_ODR
	292	# define STATUS_LED_DAT im_ioport.iop_pcdat
	293
	294	# define STATUS_LED_BIT 0x0002 /* LED 0 is on PC.14 */
6d0f6bcf	295	# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
682011ff WD	296	# define STATUS_LED_STATE STATUS_LED_BLINKING
682011ff WD	297	# define STATUS_LED_BIT1 0x0004 /* LED 1 is on PC.13 */
6d0f6bcf	298	# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ)
682011ff WD	299	# define STATUS_LED_STATE1 STATUS_LED_OFF
	300
	301	# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
	302
	303	# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
	304
04a85b3b	305	/*** NetPhone ******************************************************/
79fa88f3	306	#elif defined(CONFIG_NETPHONE) \|\| defined(CONFIG_NETTA2)
04a85b3b	307	/* XXX empty just to avoid the error */
6bdf4306 WD	308	/*** STx XTc ******************************************************/
	309	#elif defined(CONFIG_STXXTC)
	310	/* XXX empty just to avoid the error */
466b7410 WD	311	/*** sbc8240 ******************************************************/
	312	#elif defined(CONFIG_WRSBC8240)
	313	/* XXX empty just to avoid the error */
c609719b	314	/************************************************************************/
5c952cf0 WD	315	#elif defined(CONFIG_NIOS2)
	316	/* XXX empty just to avoid the error */
	317	/************************************************************************/
4707fb50 BS	318	#elif defined(CONFIG_V38B)
	319
	320	# define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */
6d0f6bcf	321	# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
4707fb50 BS	322	# define STATUS_LED_STATE STATUS_LED_BLINKING
	323
	324	# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
	325	# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
	326
a11c0b85 BS	327	#elif defined(CONFIG_MOTIONPRO)
	328
	329	#define STATUS_LED_BIT ((vu_long *) MPC5XXX_GPT6_ENABLE)
6d0f6bcf	330	#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10)
a11c0b85 BS	331	#define STATUS_LED_STATE STATUS_LED_BLINKING
	332
	333	#define STATUS_LED_BIT1 ((vu_long *) MPC5XXX_GPT7_ENABLE)
6d0f6bcf	334	#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 10)
a11c0b85 BS	335	#define STATUS_LED_STATE1 STATUS_LED_OFF
	336
	337	#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
	338
566a494f HS	339	#elif defined(CONFIG_BOARD_SPECIFIC_LED)
	340	/* led_id_t is unsigned long mask */
	341	typedef unsigned long led_id_t;
	342
	343	extern void __led_toggle (led_id_t mask);
	344	extern void __led_init (led_id_t mask, int state);
	345	extern void __led_set (led_id_t mask, int state);
c609719b WD	346	#else
	347	# error Status LED configuration missing
	348	#endif
	349	/************************************************************************/
	350
48b42616 WD	351	#ifndef CONFIG_BOARD_SPECIFIC_LED
	352	# include <asm/status_led.h>
	353	#endif
	354
de74b9ee	355	/*
bd86220f	356	* Coloured LEDs API
de74b9ee	357	*/
bd86220f PP	358	#ifndef __ASSEMBLY__
	359	extern void coloured_LED_init (void);
	360	extern void red_LED_on(void);
	361	extern void red_LED_off(void);
	362	extern void green_LED_on(void);
	363	extern void green_LED_off(void);
	364	extern void yellow_LED_on(void);
	365	extern void yellow_LED_off(void);
7cdf804f TR	366	extern void blue_LED_on(void);
7cdf804f TR	367	extern void blue_LED_off(void);
bd86220f PP	368	#else
	369	.extern LED_init
	370	.extern red_LED_on
	371	.extern red_LED_off
	372	.extern yellow_LED_on
	373	.extern yellow_LED_off
	374	.extern green_LED_on
	375	.extern green_LED_off
7cdf804f TR	376	.extern blue_LED_on
7cdf804f TR	377	.extern blue_LED_off
bd86220f PP	378	#endif
bd86220f PP	379
c609719b WD	380	#endif /* CONFIG_STATUS_LED */
	381
	382	#endif /* _STATUS_LED_H_ */