[J-u-boot.git] / arch / arm / dts / sun8i-a83t-cubietruck-plus.dts

/*
 * Copyright 2015 Chen-Yu Tsai
 *
 * Chen-Yu Tsai <[email protected]>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "sun8i-a83t.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Cubietech Cubietruck Plus";
	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";

	aliases {
		ethernet0 = &emac;
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	hdmi-connector {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con_in: endpoint {
				remote-endpoint = <&hdmi_out_con>;
			};
		};
	};

	leds {
		compatible = "gpio-leds";

		led-0 {
			label = "cubietruck-plus:blue:usr";
			gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
		};

		led-1 {
			label = "cubietruck-plus:orange:usr";
			gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
		};

		led-2 {
			label = "cubietruck-plus:white:usr";
			gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
		};

		led-3 {
			label = "cubietruck-plus:green:usr";
			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
		};
	};

	usb-hub {
		/* I2C is not connected */
		compatible = "smsc,usb3503";
		initial-mode = <1>; /* initialize in HUB mode */
		disabled-ports = <1>;
		intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
		reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
		connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
		refclk-frequency = <19200000>;
	};

	reg_usb1_vbus: reg-usb1-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb1-vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-boot-on;
		enable-active-high;
		gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
	};

	reg_usb2_vbus: reg-usb2-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb2-vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-boot-on;
		enable-active-high;
		gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
	};

	sound {
		compatible = "simple-audio-card";
		simple-audio-card,name = "On-board SPDIF";

		simple-audio-card,cpu {
			sound-dai = <&spdif>;
		};

		simple-audio-card,codec {
			sound-dai = <&spdif_out>;
		};
	};

	spdif_out: spdif-out {
		#sound-dai-cells = <0>;
		compatible = "linux,spdif-dit";
	};

	wifi_pwrseq: pwrseq {
		compatible = "mmc-pwrseq-simple";
		clocks = <&ac100_rtc 1>;
		clock-names = "ext_clock";
		/* The WiFi low power clock must be 32768 Hz */
		assigned-clocks = <&ac100_rtc 1>;
		assigned-clock-rates = <32768>;
		/* enables internal regulator and de-asserts reset */
		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
	};
};

&cpu0 {
	cpu-supply = <&reg_dcdc2>;
};

&cpu100 {
	cpu-supply = <&reg_dcdc3>;
};

&de {
	status = "okay";
};

&ehci0 {
	/* GL830 USB-to-SATA bridge here */
	status = "okay";
};

&ehci1 {
	/* USB3503 HSIC USB 2.0 hub here */
	status = "okay";
};

&emac {
	pinctrl-names = "default";
	pinctrl-0 = <&emac_rgmii_pins>;
	phy-supply = <&reg_dldo4>;
	phy-handle = <&rgmii_phy>;
	phy-mode = "rgmii-id";
	status = "okay";
};

&hdmi {
	status = "okay";
};

&hdmi_out {
	hdmi_out_con: endpoint {
		remote-endpoint = <&hdmi_con_in>;
	};
};

&mdio {
	rgmii_phy: ethernet-phy@1 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <1>;
	};
};

&mmc0 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc0_pins>;
	vmmc-supply = <&reg_dcdc1>;
	bus-width = <4>;
	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
	status = "okay";
};

&mmc1 {
	vmmc-supply = <&reg_dcdc1>;
	vqmmc-supply = <&reg_sw>;
	mmc-pwrseq = <&wifi_pwrseq>;
	bus-width = <4>;
	non-removable;
	status = "okay";
};

&mmc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
	vmmc-supply = <&reg_dcdc1>;
	bus-width = <8>;
	non-removable;
	cap-mmc-hw-reset;
	status = "okay";
};

&r_rsb {
	status = "okay";

	axp81x: pmic@3a3 {
		compatible = "x-powers,axp818", "x-powers,axp813";
		reg = <0x3a3>;
		interrupt-parent = <&r_intc>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
		eldoin-supply = <&reg_dcdc1>;
		swin-supply = <&reg_dcdc1>;
		x-powers,drive-vbus-en;
	};

	ac100: codec@e89 {
		compatible = "x-powers,ac100";
		reg = <0xe89>;

		ac100_codec: codec {
			compatible = "x-powers,ac100-codec";
			interrupt-parent = <&r_pio>;
			interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
			#clock-cells = <0>;
			clock-output-names = "4M_adda";
		};

		ac100_rtc: rtc {
			compatible = "x-powers,ac100-rtc";
			interrupt-parent = <&r_intc>;
			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
			clocks = <&ac100_codec>;
			#clock-cells = <1>;
			clock-output-names = "cko1_rtc",
					     "cko2_rtc",
					     "cko3_rtc";
		};
	};
};

#include "axp81x.dtsi"

&ac_power_supply {
	status = "okay";
};

&battery_power_supply {
	status = "okay";
};

&reg_aldo1 {
	regulator-always-on;
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-name = "vcc-1v8";
};

&reg_aldo2 {
	regulator-always-on;
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-name = "dram-pll";
};

&reg_aldo3 {
	regulator-always-on;
	regulator-min-microvolt = <3000000>;
	regulator-max-microvolt = <3000000>;
	regulator-name = "avcc";
};

&reg_dcdc1 {
	/*
	 * The schematics say this should be 3.3V, but the FEX file says
	 * it should be 3V. The latter makes sense, as the WiFi module's
	 * I/O is indirectly powered from DCDC1, through SW. It is rated
	 * at 2.98V maximum.
	 */
	regulator-always-on;
	regulator-min-microvolt = <3000000>;
	regulator-max-microvolt = <3000000>;
	regulator-name = "vcc-3v";
};

&reg_dcdc2 {
	regulator-always-on;
	regulator-min-microvolt = <700000>;
	regulator-max-microvolt = <1100000>;
	regulator-name = "vdd-cpua";
};

&reg_dcdc3 {
	regulator-always-on;
	regulator-min-microvolt = <700000>;
	regulator-max-microvolt = <1100000>;
	regulator-name = "vdd-cpub";
};

&reg_dcdc4 {
	regulator-min-microvolt = <700000>;
	regulator-max-microvolt = <1100000>;
	regulator-name = "vdd-gpu";
};

&reg_dcdc5 {
	regulator-always-on;
	regulator-min-microvolt = <1500000>;
	regulator-max-microvolt = <1500000>;
	regulator-name = "vcc-dram";
};

&reg_dcdc6 {
	regulator-always-on;
	regulator-min-microvolt = <900000>;
	regulator-max-microvolt = <900000>;
	regulator-name = "vdd-sys";
};

&reg_dldo2 {
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-name = "dp-pwr";
};

&reg_dldo3 {
	regulator-always-on;
	regulator-min-microvolt = <2500000>;
	regulator-max-microvolt = <2500000>;
	regulator-name = "ephy-io";
};

&reg_dldo4 {
	/*
	 * The PHY requires 20ms after all voltages are applied until core
	 * logic is ready and 30ms after the reset pin is de-asserted.
	 * Set a 100ms delay to account for PMIC ramp time and board traces.
	 */
	regulator-enable-ramp-delay = <100000>;
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-name = "ephy";
};

&reg_drivevbus {
	regulator-name = "usb0-vbus";
	status = "okay";
};

&reg_eldo1 {
	regulator-min-microvolt = <1200000>;
	regulator-max-microvolt = <1200000>;
	regulator-name = "dp-bridge-1";
};

&reg_eldo2 {
	regulator-min-microvolt = <1200000>;
	regulator-max-microvolt = <1200000>;
	regulator-name = "dp-bridge-2";
};

&reg_fldo1 {
	/* TODO should be handled by USB PHY */
	regulator-always-on;
	regulator-min-microvolt = <1080000>;
	regulator-max-microvolt = <1320000>;
	regulator-name = "vdd12-hsic";
};

&reg_fldo2 {
	/*
	 * Despite the embedded CPUs core not being used in any way,
	 * this must remain on or the system will hang.
	 */
	regulator-always-on;
	regulator-min-microvolt = <700000>;
	regulator-max-microvolt = <1100000>;
	regulator-name = "vdd-cpus";
};

&reg_rtc_ldo {
	regulator-name = "vcc-rtc";
};

&reg_sw {
	regulator-name = "vcc-wifi-io";
};

&spdif {
	status = "okay";
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pb_pins>;
	status = "okay";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
	uart-has-rtscts;
	status = "okay";

	bluetooth {
		compatible = "brcm,bcm4330-bt";
		clocks = <&ac100_rtc 1>;
		clock-names = "lpo";
		vbat-supply = <&reg_dcdc1>;
		vddio-supply = <&reg_sw>;
		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
		host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
	};
};

&usb_otg {
	dr_mode = "otg";
	status = "okay";
};

&usb_power_supply {
	status = "okay";
};

&usbphy {
	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
	usb0_vbus_power-supply = <&usb_power_supply>;
	usb0_vbus-supply = <&reg_drivevbus>;
	usb1_vbus-supply = <&reg_usb1_vbus>;
	usb2_vbus-supply = <&reg_usb2_vbus>;
	status = "okay";
};
Commit	Line	Data
80e5f83c HG	1	/*
	2	* Copyright 2015 Chen-Yu Tsai
	3	*
	4	* Chen-Yu Tsai <[email protected]>
	5	*
	6	* This file is dual-licensed: you can use it either under the terms
	7	* of the GPL or the X11 license, at your option. Note that this dual
	8	* licensing only applies to this file, and not this project as a
	9	* whole.
	10	*
	11	* a) This file is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License as
	13	* published by the Free Software Foundation; either version 2 of the
	14	* License, or (at your option) any later version.
	15	*
	16	* This file is distributed in the hope that it will be useful,
	17	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	18	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	19	* GNU General Public License for more details.
	20	*
	21	* Or, alternatively,
	22	*
	23	* b) Permission is hereby granted, free of charge, to any person
	24	* obtaining a copy of this software and associated documentation
	25	* files (the "Software"), to deal in the Software without
	26	* restriction, including without limitation the rights to use,
	27	* copy, modify, merge, publish, distribute, sublicense, and/or
	28	* sell copies of the Software, and to permit persons to whom the
	29	* Software is furnished to do so, subject to the following
	30	* conditions:
	31	*
	32	* The above copyright notice and this permission notice shall be
	33	* included in all copies or substantial portions of the Software.
	34	*
	35	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	36	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	37	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	38	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	39	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	40	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	41	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	42	* OTHER DEALINGS IN THE SOFTWARE.
	43	*/
	44
	45	/dts-v1/;
	46	#include "sun8i-a83t.dtsi"
	47
0ca4d40c JT	48	#include <dt-bindings/gpio/gpio.h>
0ca4d40c JT	49
80e5f83c HG	50	/ {
	51	model = "Cubietech Cubietruck Plus";
	52	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
	53
	54	aliases {
0ca4d40c	55	ethernet0 = &emac;
80e5f83c HG	56	serial0 = &uart0;
	57	};
	58
	59	chosen {
	60	stdout-path = "serial0:115200n8";
	61	};
0ca4d40c	62
2d648e69 SH	63	hdmi-connector {
	64	compatible = "hdmi-connector";
	65	type = "a";
	66
	67	port {
	68	hdmi_con_in: endpoint {
	69	remote-endpoint = <&hdmi_out_con>;
	70	};
	71	};
	72	};
	73
0ca4d40c JT	74	leds {
	75	compatible = "gpio-leds";
	76
2d648e69	77	led-0 {
0ca4d40c JT	78	label = "cubietruck-plus:blue:usr";
	79	gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
	80	};
	81
2d648e69	82	led-1 {
0ca4d40c JT	83	label = "cubietruck-plus:orange:usr";
	84	gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
	85	};
	86
2d648e69	87	led-2 {
0ca4d40c JT	88	label = "cubietruck-plus:white:usr";
	89	gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
	90	};
	91
2d648e69	92	led-3 {
0ca4d40c JT	93	label = "cubietruck-plus:green:usr";
	94	gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
	95	};
	96	};
	97
	98	usb-hub {
	99	/* I2C is not connected */
	100	compatible = "smsc,usb3503";
	101	initial-mode = <1>; /* initialize in HUB mode */
	102	disabled-ports = <1>;
	103	intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
2d648e69	104	reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
0ca4d40c JT	105	connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
	106	refclk-frequency = <19200000>;
	107	};
	108
	109	reg_usb1_vbus: reg-usb1-vbus {
	110	compatible = "regulator-fixed";
	111	regulator-name = "usb1-vbus";
	112	regulator-min-microvolt = <5000000>;
	113	regulator-max-microvolt = <5000000>;
	114	regulator-boot-on;
	115	enable-active-high;
	116	gpio = <&pio 3 29 GPIO_ACTIVE_HIGH>; /* PD29 */
	117	};
	118
	119	reg_usb2_vbus: reg-usb2-vbus {
	120	compatible = "regulator-fixed";
	121	regulator-name = "usb2-vbus";
	122	regulator-min-microvolt = <5000000>;
	123	regulator-max-microvolt = <5000000>;
	124	regulator-boot-on;
	125	enable-active-high;
	126	gpio = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
	127	};
	128
	129	sound {
	130	compatible = "simple-audio-card";
	131	simple-audio-card,name = "On-board SPDIF";
	132
	133	simple-audio-card,cpu {
	134	sound-dai = <&spdif>;
	135	};
	136
	137	simple-audio-card,codec {
	138	sound-dai = <&spdif_out>;
	139	};
	140	};
	141
	142	spdif_out: spdif-out {
	143	#sound-dai-cells = <0>;
	144	compatible = "linux,spdif-dit";
	145	};
	146
70fc8449	147	wifi_pwrseq: pwrseq {
0ca4d40c JT	148	compatible = "mmc-pwrseq-simple";
	149	clocks = <&ac100_rtc 1>;
	150	clock-names = "ext_clock";
	151	/* The WiFi low power clock must be 32768 Hz */
	152	assigned-clocks = <&ac100_rtc 1>;
	153	assigned-clock-rates = <32768>;
	154	/* enables internal regulator and de-asserts reset */
	155	reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
	156	};
80e5f83c HG	157	};
80e5f83c HG	158
2d648e69 SH	159	&cpu0 {
	160	cpu-supply = <&reg_dcdc2>;
	161	};
	162
	163	&cpu100 {
	164	cpu-supply = <&reg_dcdc3>;
	165	};
	166
	167	&de {
	168	status = "okay";
	169	};
	170
d02e6474	171	&ehci0 {
0ca4d40c	172	/* GL830 USB-to-SATA bridge here */
d02e6474 CYT	173	status = "okay";
	174	};
	175
	176	&ehci1 {
0ca4d40c JT	177	/* USB3503 HSIC USB 2.0 hub here */
	178	status = "okay";
	179	};
	180
	181	&emac {
	182	pinctrl-names = "default";
	183	pinctrl-0 = <&emac_rgmii_pins>;
	184	phy-supply = <&reg_dldo4>;
	185	phy-handle = <&rgmii_phy>;
85da5587	186	phy-mode = "rgmii-id";
0ca4d40c JT	187	status = "okay";
	188	};
	189
2d648e69 SH	190	&hdmi {
	191	status = "okay";
	192	};
	193
	194	&hdmi_out {
	195	hdmi_out_con: endpoint {
	196	remote-endpoint = <&hdmi_con_in>;
	197	};
	198	};
	199
0ca4d40c JT	200	&mdio {
	201	rgmii_phy: ethernet-phy@1 {
	202	compatible = "ethernet-phy-ieee802.3-c22";
	203	reg = <1>;
	204	};
	205	};
	206
	207	&mmc0 {
	208	pinctrl-names = "default";
	209	pinctrl-0 = <&mmc0_pins>;
	210	vmmc-supply = <&reg_dcdc1>;
	211	bus-width = <4>;
	212	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
	213	status = "okay";
	214	};
	215
	216	&mmc1 {
	217	vmmc-supply = <&reg_dcdc1>;
	218	vqmmc-supply = <&reg_sw>;
	219	mmc-pwrseq = <&wifi_pwrseq>;
	220	bus-width = <4>;
	221	non-removable;
	222	status = "okay";
	223	};
	224
	225	&mmc2 {
	226	pinctrl-names = "default";
	227	pinctrl-0 = <&mmc2_8bit_emmc_pins>;
	228	vmmc-supply = <&reg_dcdc1>;
	229	bus-width = <8>;
	230	non-removable;
	231	cap-mmc-hw-reset;
	232	status = "okay";
	233	};
	234
	235	&r_rsb {
	236	status = "okay";
	237
	238	axp81x: pmic@3a3 {
	239	compatible = "x-powers,axp818", "x-powers,axp813";
	240	reg = <0x3a3>;
	241	interrupt-parent = <&r_intc>;
	242	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
	243	eldoin-supply = <&reg_dcdc1>;
	244	swin-supply = <&reg_dcdc1>;
	245	x-powers,drive-vbus-en;
	246	};
	247
	248	ac100: codec@e89 {
	249	compatible = "x-powers,ac100";
	250	reg = <0xe89>;
	251
	252	ac100_codec: codec {
	253	compatible = "x-powers,ac100-codec";
	254	interrupt-parent = <&r_pio>;
	255	interrupts = <0 11 IRQ_TYPE_LEVEL_LOW>; /* PL11 */
	256	#clock-cells = <0>;
	257	clock-output-names = "4M_adda";
	258	};
	259
	260	ac100_rtc: rtc {
	261	compatible = "x-powers,ac100-rtc";
	262	interrupt-parent = <&r_intc>;
	263	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
264	clocks = <&ac100_codec>;
265	#clock-cells = <1>;
266	clock-output-names = "cko1_rtc",
267	"cko2_rtc",
268	"cko3_rtc";
269	};
270	};
271	};
272
273	#include "axp81x.dtsi"
274
2d648e69 SH	275	&ac_power_supply {
	276	status = "okay";
	277	};
	278
	279	&battery_power_supply {
	280	status = "okay";
	281	};
	282
0ca4d40c JT	283	&reg_aldo1 {
	284	regulator-always-on;
	285	regulator-min-microvolt = <1800000>;
	286	regulator-max-microvolt = <1800000>;
	287	regulator-name = "vcc-1v8";
	288	};
	289
	290	&reg_aldo2 {
	291	regulator-always-on;
	292	regulator-min-microvolt = <1800000>;
	293	regulator-max-microvolt = <1800000>;
	294	regulator-name = "dram-pll";
	295	};
	296
	297	&reg_aldo3 {
	298	regulator-always-on;
	299	regulator-min-microvolt = <3000000>;
	300	regulator-max-microvolt = <3000000>;
	301	regulator-name = "avcc";
	302	};
	303
	304	&reg_dcdc1 {
	305	/*
	306	* The schematics say this should be 3.3V, but the FEX file says
	307	* it should be 3V. The latter makes sense, as the WiFi module's
	308	* I/O is indirectly powered from DCDC1, through SW. It is rated
	309	* at 2.98V maximum.
	310	*/
	311	regulator-always-on;
	312	regulator-min-microvolt = <3000000>;
	313	regulator-max-microvolt = <3000000>;
	314	regulator-name = "vcc-3v";
	315	};
	316
	317	&reg_dcdc2 {
	318	regulator-always-on;
	319	regulator-min-microvolt = <700000>;
	320	regulator-max-microvolt = <1100000>;
	321	regulator-name = "vdd-cpua";
	322	};
	323
	324	&reg_dcdc3 {
	325	regulator-always-on;
	326	regulator-min-microvolt = <700000>;
	327	regulator-max-microvolt = <1100000>;
	328	regulator-name = "vdd-cpub";
	329	};
	330
	331	&reg_dcdc4 {
	332	regulator-min-microvolt = <700000>;
	333	regulator-max-microvolt = <1100000>;
	334	regulator-name = "vdd-gpu";
	335	};
	336
	337	&reg_dcdc5 {
	338	regulator-always-on;
	339	regulator-min-microvolt = <1500000>;
	340	regulator-max-microvolt = <1500000>;
	341	regulator-name = "vcc-dram";
	342	};
	343
	344	&reg_dcdc6 {
	345	regulator-always-on;
	346	regulator-min-microvolt = <900000>;
347	regulator-max-microvolt = <900000>;
348	regulator-name = "vdd-sys";
349	};
350
351	&reg_dldo2 {
352	regulator-min-microvolt = <3300000>;
353	regulator-max-microvolt = <3300000>;
354	regulator-name = "dp-pwr";
355	};
356
357	&reg_dldo3 {
358	regulator-always-on;
359	regulator-min-microvolt = <2500000>;
360	regulator-max-microvolt = <2500000>;
361	regulator-name = "ephy-io";
362	};
363
364	&reg_dldo4 {
365	/*
366	* The PHY requires 20ms after all voltages are applied until core
367	* logic is ready and 30ms after the reset pin is de-asserted.
368	* Set a 100ms delay to account for PMIC ramp time and board traces.
369	*/
370	regulator-enable-ramp-delay = <100000>;
371	regulator-min-microvolt = <3300000>;
372	regulator-max-microvolt = <3300000>;
373	regulator-name = "ephy";
374	};
375
376	&reg_drivevbus {
377	regulator-name = "usb0-vbus";
378	status = "okay";
379	};
380
381	&reg_eldo1 {
382	regulator-min-microvolt = <1200000>;
383	regulator-max-microvolt = <1200000>;
384	regulator-name = "dp-bridge-1";
385	};
386
387	&reg_eldo2 {
388	regulator-min-microvolt = <1200000>;
389	regulator-max-microvolt = <1200000>;
390	regulator-name = "dp-bridge-2";
391	};
392
393	&reg_fldo1 {
394	/* TODO should be handled by USB PHY */
395	regulator-always-on;
396	regulator-min-microvolt = <1080000>;
397	regulator-max-microvolt = <1320000>;
398	regulator-name = "vdd12-hsic";
399	};
400
401	&reg_fldo2 {
402	/*
403	* Despite the embedded CPUs core not being used in any way,
404	* this must remain on or the system will hang.
405	*/
406	regulator-always-on;
407	regulator-min-microvolt = <700000>;
408	regulator-max-microvolt = <1100000>;
409	regulator-name = "vdd-cpus";
410	};
411
412	&reg_rtc_ldo {
413	regulator-name = "vcc-rtc";
414	};
415
416	&reg_sw {
417	regulator-name = "vcc-wifi-io";
418	};
419
420	&spdif {
d02e6474 CYT	421	status = "okay";
	422	};
	423
80e5f83c HG	424	&uart0 {
80e5f83c HG	425	pinctrl-names = "default";
0ca4d40c	426	pinctrl-0 = <&uart0_pb_pins>;
80e5f83c HG	427	status = "okay";
80e5f83c HG	428	};
d02e6474	429
2d648e69 SH	430	&uart1 {
	431	pinctrl-names = "default";
	432	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
	433	uart-has-rtscts;
	434	status = "okay";
	435
	436	bluetooth {
	437	compatible = "brcm,bcm4330-bt";
	438	clocks = <&ac100_rtc 1>;
	439	clock-names = "lpo";
	440	vbat-supply = <&reg_dcdc1>;
	441	vddio-supply = <&reg_sw>;
	442	device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
	443	host-wakeup-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
	444	shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
	445	};
	446	};
	447
d02e6474	448	&usb_otg {
2d648e69 SH	449	dr_mode = "otg";
	450	status = "okay";
	451	};
	452
	453	&usb_power_supply {
d02e6474 CYT	454	status = "okay";
d02e6474 CYT	455	};
0ca4d40c JT	456
0ca4d40c JT	457	&usbphy {
2d648e69 SH	458	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
	459	usb0_vbus_power-supply = <&usb_power_supply>;
	460	usb0_vbus-supply = <&reg_drivevbus>;
0ca4d40c JT	461	usb1_vbus-supply = <&reg_usb1_vbus>;
	462	usb2_vbus-supply = <&reg_usb2_vbus>;
	463	status = "okay";
	464	};