[J-u-boot.git] / include / configs / cmc_pu2.h

/*
 * 2004-2005 Gary Jennejohn <[email protected]>
 *
 * Configuration settings for the CMC PU2 board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* ARM asynchronous clock */
#define AT91C_MAIN_CLOCK	207360000	/* from 18.432 MHz crystal (18432000 / 4 * 45) */
#define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK/3)	/* peripheral clock */

#define AT91_SLOW_CLOCK		32768	/* slow clock */

#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
#define CONFIG_AT91RM9200DK	1	/* on an AT91RM9200DK Board	*/
#define CONFIG_CMC_PU2		1	/* on an CMC_PU2 Board		*/
#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
#define USE_920T_MMU		1

#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG	1

#ifndef CONFIG_SKIP_LOWLEVEL_INIT
#define CFG_USE_MAIN_OSCILLATOR		1
/* flash */
#define MC_PUIA_VAL	0x00000000
#define MC_PUP_VAL	0x00000000
#define MC_PUER_VAL	0x00000000
#define MC_ASR_VAL	0x00000000
#define MC_AASR_VAL	0x00000000
#define EBI_CFGR_VAL	0x00000000
#define SMC2_CSR_VAL	0x100032ad /* 16bit, 2 TDF, 4 WS */

/* clocks */
#define PLLAR_VAL	0x202CBE04 /* 207.360 MHz for PCK */
#define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
#define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */

/* sdram */
#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
#define PIOC_BSR_VAL	0x00000000
#define PIOC_PDR_VAL	0xFFFF0000
#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
#define SDRC_CR_VAL	0x3399c1d4 /* set up the SDRAM */
#define SDRAM		0x20000000 /* address of the SDRAM */
#define SDRAM1		0x20000080 /* address of the SDRAM */
#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
#define SDRC_MR_VAL	0x00000002 /* Precharge All */
#define SDRC_MR_VAL1	0x00000004 /* refresh */
#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */

/*
 * Size of malloc() pool
 */
#define CFG_MALLOC_LEN	(CFG_ENV_SIZE + 128*1024)
#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

#define CONFIG_BAUDRATE		9600

/*
 * Hardware drivers
 */

/* define one of these to choose the DBGU, USART0  or USART1 as console */
#undef CONFIG_DBGU
#define CONFIG_USART0
#undef CONFIG_USART1

#undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/

#undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */

#define CONFIG_HARD_I2C

#ifdef CONFIG_HARD_I2C
#define CFG_I2C_SPEED		0	/* not used */
#define CFG_I2C_SLAVE		0	/* not used */
#define CONFIG_RTC_RS5C372A		/* RICOH I2C RTC */
#define CFG_I2C_RTC_ADDR	0x32
#define CFG_I2C_EEPROM_ADDR	0x50
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_I2C_EEPROM_ADDR_OVERFLOW
#endif
/* still about 20 kB free with this defined */
#define CFG_LONGHELP

#define CONFIG_BOOTDELAY      3

#ifdef CONFIG_HARD_I2C
#define CONFIG_COMMANDS		\
		       ((CONFIG_CMD_DFL	| \
			CFG_CMD_DATE	| \
			CFG_CMD_DHCP 	| \
			CFG_CMD_EEPROM	| \
			CFG_CMD_I2C	| \
			CFG_CMD_NFS	| \
			CFG_CMD_SNTP  ) & \
		      ~(CFG_CMD_FPGA | CFG_CMD_MISC) )
#else
#define CONFIG_COMMANDS		\
		       ((CONFIG_CMD_DFL	| \
			CFG_CMD_DHCP 	| \
			CFG_CMD_NFS	| \
			CFG_CMD_SNTP  ) & \
		      ~(CFG_CMD_FPGA | CFG_CMD_MISC) )
#define CONFIG_TIMESTAMP
#endif
#define CFG_LONGHELP

/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>

#define AT91_SMART_MEDIA_ALE	(1 << 22)	/* our ALE is AD22 */
#define AT91_SMART_MEDIA_CLE	(1 << 21)	/* our CLE is AD21 */

#define CONFIG_NR_DRAM_BANKS	1
#define PHYS_SDRAM		0x20000000
#define PHYS_SDRAM_SIZE		0x1000000 	/* 16 megs */

#define CFG_MEMTEST_START	PHYS_SDRAM
#define CFG_MEMTEST_END		CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144

#define CONFIG_DRIVER_ETHER
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_AT91C_USE_RMII

#define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
#define CFG_MAX_DATAFLASH_BANKS		2
#define CFG_MAX_DATAFLASH_PAGES		16384
#define CFG_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
#define CFG_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */

#define PHYS_FLASH_1			0x10000000
#define PHYS_FLASH_SIZE			0x800000  /* 8 megs main flash */
#define CFG_FLASH_BASE			PHYS_FLASH_1
#define CFG_MONITOR_BASE		CFG_FLASH_BASE
#define CFG_MAX_FLASH_BANKS		1
#define CFG_MAX_FLASH_SECT		256
#define CFG_FLASH_ERASE_TOUT		(11 * CFG_HZ)	/* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT		( 2 * CFG_HZ)	/* Timeout for Flash Write */

#define CFG_ENV_IS_IN_FLASH		1
#define CFG_ENV_OFFSET			0x20000		/* after u-boot.bin */
#define CFG_ENV_SECT_SIZE		(64 << 10)	/* sectors are 64 kB */
#define CFG_ENV_SIZE			(16 << 10)	/* Use only 16 kB */

#define CFG_LOAD_ADDR		0x21000000  /* default load address */

#define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }

#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
#define CFG_MAXARGS		32		/* max number of command args */
#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */

#ifndef __ASSEMBLY__
/*-----------------------------------------------------------------------
 * Board specific extension for bd_info
 *
 * This structure is embedded in the global bd_info (bd_t) structure
 * and can be used by the board specific code (eg board/...)
 */

struct bd_info_ext {
	/* helper variable for board environment handling
	 *
	 * env_crc_valid == 0	 =>   uninitialised
	 * env_crc_valid  > 0	 =>   environment crc in flash is valid
	 * env_crc_valid  < 0	 =>   environment crc in flash is invalid
	 */
	int env_crc_valid;
};
#endif	/* __ASSEMBLY__ */

#define CFG_HZ 1000
#define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2)	/* AT91C_TC0_CMR is implicitly set to */
						/* AT91C_TC_TIMER_DIV1_CLOCK */

#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */

#ifdef CONFIG_USE_IRQ
#error CONFIG_USE_IRQ not supported
#endif

#define CFG_DEVICE_NULLDEV	 1	/* enble null device		*/
#define CONFIG_SILENT_CONSOLE	 1	/* enable silent startup	*/

#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
#define CONFIG_AUTOBOOT_STOP_STR "R"	/* default password */

#define CONFIG_VERSION_VARIABLE	1       /* include version env variable */

#define	CONFIG_EXTRA_ENV_SETTINGS	\
	"net_nfs=tftp $(loadaddr) $(bootfile);run nfsargs addip addcons " \
		"addmtd;bootm\0" \
	"nfsargs=setenv bootargs root=/dev/nfs rw " \
		"nfsroot=$(serverip):$(rootpath)\0" \
	"net_cramfs=tftp $(loadaddr) $(bootfile); run flashargs addip " \
		"addcons addmtd; bootm\0" \
	"flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
	"flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
	"addip=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \
		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
		"$(hostname)::off\0" \
	"addcons=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0" \
	"addmtd=setenv bootargs $(bootargs) mtdparts=cmc_pu2:128k(uboot)ro," \
		"64k(environment),768k(linux),4096k(root),-\0" \
	"load=tftp $(loadaddr) $(loadfile)\0" \
	"update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
		"cp.b $(loadaddr) 10000000 $(filesize);" \
		"protect on 10000000 1001ffff\0" \
	"updatel=era 10030000 100effff;tftp $(loadaddr) $(bootfile); " \
		"cp.b $(loadaddr) 10030000 $(filesize)\0" \
	"updatec=era 100f0000 104effff;tftp $(loadaddr) $(cramfsimage); " \
		"cp.b $(loadaddr) 100f0000 $(filesize)\0" \
	"updatej=era 104f0000 107fffff;tftp $(loadaddr) $(jffsimage); " \
		"cp.b $(loadaddr) 104f0000 $(filesize)\0" \
	"cramfsimage=cramfs_cmc-pu2.img\0" \
	"jffsimage=jffs2_cmc-pu2.img\0" \
	"loadfile=u-boot_cmc-pu2.bin\0" \
	"bootfile=uImage_cmc-pu2\0" \
	"loadaddr=0x20800000\0" \
	"hostname=CMC-TC-PU2\0" \
	"bootcmd=run dhcp_start;run flash_cramfs\0" \
	"autoload=n\0" \
	"dhcp_start=echo no DHCP\0" \
	"ipaddr=192.168.0.190\0"
#endif	/* __CONFIG_H */
Commit	Line	Data
2cbe571a	1	/*
414eec35	2	* 2004-2005 Gary Jennejohn <[email protected]>
2cbe571a	3	*
9d5028c2	4	* Configuration settings for the CMC PU2 board.
2cbe571a WD	5	*
	6	* See file CREDITS for list of people who contributed to this
	7	* project.
	8	*
	9	* This program is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of
	12	* the License, or (at your option) any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
45ea3fca	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2cbe571a WD	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with this program; if not, write to the Free Software
	21	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	22	* MA 02111-1307 USA
	23	*/
	24
	25	#ifndef __CONFIG_H
	26	#define __CONFIG_H
	27
2cbe571a	28	/* ARM asynchronous clock */
ed54e621	29	#define AT91C_MAIN_CLOCK 207360000 /* from 18.432 MHz crystal (18432000 / 4 * 45) */
101e8dfa	30	#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */
2cbe571a WD	31
	32	#define AT91_SLOW_CLOCK 32768 /* slow clock */
	33
a85f9f21 WD	34	#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
	35	#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
	36	#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
	37	#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */
	38	#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
	39	#define USE_920T_MMU 1
	40
2cbe571a WD	41	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	42	#define CONFIG_SETUP_MEMORY_TAGS 1
	43	#define CONFIG_INITRD_TAG 1
	44
8aa1a2d1	45	#ifndef CONFIG_SKIP_LOWLEVEL_INIT
ef2807c6 WD	46	#define CFG_USE_MAIN_OSCILLATOR 1
	47	/* flash */
	48	#define MC_PUIA_VAL 0x00000000
	49	#define MC_PUP_VAL 0x00000000
	50	#define MC_PUER_VAL 0x00000000
	51	#define MC_ASR_VAL 0x00000000
	52	#define MC_AASR_VAL 0x00000000
	53	#define EBI_CFGR_VAL 0x00000000
	54	#define SMC2_CSR_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */
	55
	56	/* clocks */
	57	#define PLLAR_VAL 0x202CBE04 /* 207.360 MHz for PCK */
	58	#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
	59	#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
	60
	61	/* sdram */
	62	#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
	63	#define PIOC_BSR_VAL 0x00000000
	64	#define PIOC_PDR_VAL 0xFFFF0000
	65	#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
	66	#define SDRC_CR_VAL 0x3399c1d4 /* set up the SDRAM */
	67	#define SDRAM 0x20000000 /* address of the SDRAM */
	68	#define SDRAM1 0x20000080 /* address of the SDRAM */
	69	#define SDRAM_VAL 0x00000000 /* value written to SDRAM */
	70	#define SDRC_MR_VAL 0x00000002 /* Precharge All */
	71	#define SDRC_MR_VAL1 0x00000004 /* refresh */
	72	#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
	73	#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
	74	#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
8aa1a2d1	75	#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
ef2807c6	76
2cbe571a WD	77	/*
	78	* Size of malloc() pool
	79	*/
	80	#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
	81	#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	82
45ea3fca	83	#define CONFIG_BAUDRATE 9600
2cbe571a	84
2cbe571a WD	85	/*
	86	* Hardware drivers
	87	*/
	88
	89	/* define one of these to choose the DBGU, USART0 or USART1 as console */
	90	#undef CONFIG_DBGU
9d5028c2 WD	91	#define CONFIG_USART0
9d5028c2 WD	92	#undef CONFIG_USART1
2cbe571a WD	93
	94	#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
	95
	96	#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
	97
9d5028c2	98	#define CONFIG_HARD_I2C
2cbe571a WD	99
2cbe571a WD	100	#ifdef CONFIG_HARD_I2C
45ea3fca WD	101	#define CFG_I2C_SPEED 0 /* not used */
	102	#define CFG_I2C_SLAVE 0 /* not used */
	103	#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */
	104	#define CFG_I2C_RTC_ADDR 0x32
	105	#define CFG_I2C_EEPROM_ADDR 0x50
2cbe571a WD	106	#define CFG_I2C_EEPROM_ADDR_LEN 1
	107	#define CFG_I2C_EEPROM_ADDR_OVERFLOW
	108	#endif
ed54e621 WD	109	/* still about 20 kB free with this defined */
ed54e621 WD	110	#define CFG_LONGHELP
2cbe571a WD	111
2cbe571a WD	112	#define CONFIG_BOOTDELAY 3
2cbe571a WD	113
	114	#ifdef CONFIG_HARD_I2C
	115	#define CONFIG_COMMANDS \
45ea3fca	116	((CONFIG_CMD_DFL \| \
45ea3fca	117	CFG_CMD_DATE \| \
414eec35	118	CFG_CMD_DHCP \| \
45ea3fca	119	CFG_CMD_EEPROM \| \
414eec35 WD	120	CFG_CMD_I2C \| \
	121	CFG_CMD_NFS \| \
	122	CFG_CMD_SNTP ) & \
45ea3fca	123	~(CFG_CMD_FPGA \| CFG_CMD_MISC) )
2cbe571a WD	124	#else
2cbe571a WD	125	#define CONFIG_COMMANDS \
45ea3fca	126	((CONFIG_CMD_DFL \| \
414eec35 WD	127	CFG_CMD_DHCP \| \
	128	CFG_CMD_NFS \| \
	129	CFG_CMD_SNTP ) & \
45ea3fca WD	130	~(CFG_CMD_FPGA \| CFG_CMD_MISC) )
45ea3fca WD	131	#define CONFIG_TIMESTAMP
2cbe571a	132	#endif
ed54e621	133	#define CFG_LONGHELP
2cbe571a WD	134
	135	/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	136	#include <cmd_confdefs.h>
	137
45ea3fca WD	138	#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
45ea3fca WD	139	#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
2cbe571a	140
45ea3fca WD	141	#define CONFIG_NR_DRAM_BANKS 1
	142	#define PHYS_SDRAM 0x20000000
	143	#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */
2cbe571a	144
3dd7f0f0 WD	145	#define CFG_MEMTEST_START PHYS_SDRAM
3dd7f0f0 WD	146	#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
2cbe571a WD	147
	148	#define CONFIG_DRIVER_ETHER
	149	#define CONFIG_NET_RETRY_COUNT 20
	150	#define CONFIG_AT91C_USE_RMII
	151
2cbe571a	152	#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
45ea3fca WD	153	#define CFG_MAX_DATAFLASH_BANKS 2
45ea3fca WD	154	#define CFG_MAX_DATAFLASH_PAGES 16384
2cbe571a WD	155	#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
	156	#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
	157
	158	#define PHYS_FLASH_1 0x10000000
9d5028c2	159	#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
2cbe571a	160	#define CFG_FLASH_BASE PHYS_FLASH_1
45ea3fca	161	#define CFG_MONITOR_BASE CFG_FLASH_BASE
2cbe571a WD	162	#define CFG_MAX_FLASH_BANKS 1
2cbe571a WD	163	#define CFG_MAX_FLASH_SECT 256
e6ba3c92 WD	164	#define CFG_FLASH_ERASE_TOUT (11 * CFG_HZ) /* Timeout for Flash Erase */
e6ba3c92 WD	165	#define CFG_FLASH_WRITE_TOUT ( 2 * CFG_HZ) /* Timeout for Flash Write */
2cbe571a	166
2cbe571a	167	#define CFG_ENV_IS_IN_FLASH 1
45ea3fca WD	168	#define CFG_ENV_OFFSET 0x20000 /* after u-boot.bin */
	169	#define CFG_ENV_SECT_SIZE (64 << 10) /* sectors are 64 kB */
	170	#define CFG_ENV_SIZE (16 << 10) /* Use only 16 kB */
2cbe571a WD	171
	172	#define CFG_LOAD_ADDR 0x21000000 /* default load address */
	173
45ea3fca	174	#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
2cbe571a	175
45ea3fca	176	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
2cbe571a	177	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
45ea3fca	178	#define CFG_MAXARGS 32 /* max number of command args */
2cbe571a WD	179	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	180
	181	#ifndef __ASSEMBLY__
	182	/*-----------------------------------------------------------------------
	183	* Board specific extension for bd_info
	184	*
	185	* This structure is embedded in the global bd_info (bd_t) structure
	186	* and can be used by the board specific code (eg board/...)
	187	*/
	188
	189	struct bd_info_ext {
	190	/* helper variable for board environment handling
	191	*
45ea3fca WD	192	* env_crc_valid == 0 => uninitialised
	193	* env_crc_valid > 0 => environment crc in flash is valid
	194	* env_crc_valid < 0 => environment crc in flash is invalid
2cbe571a WD	195	*/
	196	int env_crc_valid;
	197	};
45ea3fca	198	#endif /* __ASSEMBLY__ */
2cbe571a	199
9455b7f3	200	#define CFG_HZ 1000
101e8dfa	201	#define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
59acc296	202	/* AT91C_TC_TIMER_DIV1_CLOCK */
2cbe571a WD	203
	204	#define CONFIG_STACKSIZE (321024) / regular stack */
	205
	206	#ifdef CONFIG_USE_IRQ
	207	#error CONFIG_USE_IRQ not supported
	208	#endif
	209
3dd7f0f0 WD	210	#define CFG_DEVICE_NULLDEV 1 /* enble null device */
	211	#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
	212
	213	#define CONFIG_AUTOBOOT_KEYED
	214	#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
	215	#define CONFIG_AUTOBOOT_STOP_STR "R" /* default password */
	216
	217	#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
	218
	219	#define CONFIG_EXTRA_ENV_SETTINGS \
	220	"net_nfs=tftp $(loadaddr) $(bootfile);run nfsargs addip addcons " \
	221	"addmtd;bootm\0" \
	222	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	223	"nfsroot=$(serverip):$(rootpath)\0" \
	224	"net_cramfs=tftp $(loadaddr) $(bootfile); run flashargs addip " \
	225	"addcons addmtd; bootm\0" \
	226	"flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
	227	"flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
	228	"addip=setenv bootargs $(bootargs) ethaddr=$(ethaddr) " \
	229	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
	230	"$(hostname)::off\0" \
	231	"addcons=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0" \
	232	"addmtd=setenv bootargs $(bootargs) mtdparts=cmc_pu2:128k(uboot)ro," \
	233	"64k(environment),768k(linux),4096k(root),-\0" \
	234	"load=tftp $(loadaddr) $(loadfile)\0" \
	235	"update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
	236	"cp.b $(loadaddr) 10000000 $(filesize);" \
	237	"protect on 10000000 1001ffff\0" \
	238	"updatel=era 10030000 100effff;tftp $(loadaddr) $(bootfile); " \
	239	"cp.b $(loadaddr) 10030000 $(filesize)\0" \
	240	"updatec=era 100f0000 104effff;tftp $(loadaddr) $(cramfsimage); " \
	241	"cp.b $(loadaddr) 100f0000 $(filesize)\0" \
	242	"updatej=era 104f0000 107fffff;tftp $(loadaddr) $(jffsimage); " \
	243	"cp.b $(loadaddr) 104f0000 $(filesize)\0" \
	244	"cramfsimage=cramfs_cmc-pu2.img\0" \
	245	"jffsimage=jffs2_cmc-pu2.img\0" \
	246	"loadfile=u-boot_cmc-pu2.bin\0" \
	247	"bootfile=uImage_cmc-pu2\0" \
	248	"loadaddr=0x20800000\0" \
	249	"hostname=CMC-TC-PU2\0" \
	250	"bootcmd=run dhcp_start;run flash_cramfs\0" \
	251	"autoload=n\0" \
	252	"dhcp_start=echo no DHCP\0" \
	253	"ipaddr=192.168.0.190\0"
45ea3fca	254	#endif /* __CONFIG_H */