[J-u-boot.git] / include / configs / PCIPPC6.h

/*
 * (C) Copyright 2002-2005
 * Wolfgang Denk, DENX Software Engineering, [email protected].
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 *
 * Configuration settings for the PCIPPC-6 board.
 *
 */

/* ------------------------------------------------------------------------- */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_PCIPPC2		1	/* this is a PCIPPC2 board	*/

#define CONFIG_BOARD_EARLY_INIT_F 1
#define CONFIG_MISC_INIT_R	1

#define CONFIG_CONS_INDEX	1
#define CONFIG_BAUDRATE		9600
#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

#define CONFIG_PREBOOT		""
#define CONFIG_BOOTDELAY	5

#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
				 CONFIG_BOOTP_BOOTFILESIZE)

#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION

#define CONFIG_COMMANDS        (CONFIG_CMD_DFL	| \
				CFG_CMD_ASKENV	| \
				CFG_CMD_BSP	| \
				CFG_CMD_DATE	| \
				CFG_CMD_DHCP	| \
				CFG_CMD_DOC	| \
				CFG_CMD_ELF	| \
				CFG_CMD_NFS	| \
				CFG_CMD_PCI	| \
				CFG_CMD_SCSI	| \
				CFG_CMD_SNTP	)


#define CONFIG_PCI		1
#define CONFIG_PCI_PNP		1	/* PCI plug-and-play */

/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
 */
#include <cmd_confdefs.h>


/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP			/* undef to save memory		*/
#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/

#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
#ifdef	CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2	"> "
#endif
#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/

/* Print Buffer Size
 */
#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)

#define CFG_MAXARGS	64		/* max number of command args	*/
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define CFG_SDRAM_BASE	    0x00000000
#define CFG_FLASH_BASE	    0xFFF00000
#define CFG_FLASH_MAX_SIZE  0x00100000
/* Maximum amount of RAM.
 */
#define CFG_MAX_RAM_SIZE    0x20000000	/* 512Mb			*/

#define CFG_RESET_ADDRESS   0xFFF00100

#define CFG_MONITOR_BASE    TEXT_BASE

#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/

#if CFG_MONITOR_BASE >= CFG_SDRAM_BASE && \
    CFG_MONITOR_BASE < CFG_SDRAM_BASE + CFG_MAX_RAM_SIZE
#define CFG_RAMBOOT
#else
#undef CFG_RAMBOOT
#endif

#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
#define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area
 */

/* Size in bytes reserved for initial data
 */
#define CFG_GBL_DATA_SIZE    128

#define CFG_INIT_RAM_ADDR     0x40000000
#define CFG_INIT_RAM_END      0x8000
#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET    CFG_GBL_DATA_OFFSET

#define CFG_INIT_RAM_LOCK

/*
 * Temporary buffer for serial data until the real serial driver
 * is initialised (memtest will destroy this buffer)
 */
#define CFG_SCONSOLE_ADDR     CFG_INIT_RAM_ADDR
#define CFG_SCONSOLE_SIZE     0x0002000

/* SDRAM 0 - 256MB
 */
#define CFG_DBAT0L	      (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_DBAT0U	      (CFG_SDRAM_BASE | \
			       BATU_BL_256M | BATU_VS | BATU_VP)
/* SDRAM 1 - 256MB
 */
#define CFG_DBAT1L	      ((CFG_SDRAM_BASE + 0x10000000) | \
			       BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_DBAT1U	      ((CFG_SDRAM_BASE + 0x10000000) | \
			       BATU_BL_256M | BATU_VS | BATU_VP)

/* Init RAM in the CPU DCache (no backing memory)
 */
#define CFG_DBAT2L	      (CFG_INIT_RAM_ADDR | \
			       BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_DBAT2U	      (CFG_INIT_RAM_ADDR | \
			       BATU_BL_128K | BATU_VS | BATU_VP)

/* I/O and PCI memory at 0xf0000000
 */
#define CFG_DBAT3L	      (0xf0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
#define CFG_DBAT3U	      (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP)

#define CFG_IBAT0L	      CFG_DBAT0L
#define CFG_IBAT0U	      CFG_DBAT0U
#define CFG_IBAT1L	      CFG_DBAT1L
#define CFG_IBAT1U	      CFG_DBAT1U
#define CFG_IBAT2L	      CFG_DBAT2L
#define CFG_IBAT2U	      CFG_DBAT2U
#define CFG_IBAT3L	      CFG_DBAT3L
#define CFG_IBAT3U	      CFG_DBAT3U

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 * For the detail description refer to the PCIPPC2 user's manual.
 */
#define CFG_HZ		      1000
#define CFG_BUS_HZ	      100000000 /* bus speed - 100 mhz		*/
#define CFG_CPU_CLK	      300000000
#define CFG_BUS_CLK	      100000000

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ	      (8 << 20) /* Initial Memory map for Linux */

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
#define CFG_MAX_FLASH_SECT	16	/* Max number of sectors in one bank	*/

#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CFG_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/

/*
 * Note: environment is not EMBEDDED in the U-Boot code.
 * It's stored in flash separately.
 */
#define CFG_ENV_IS_IN_FLASH	1
#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x70000)
#define CFG_ENV_SIZE		0x1000	/* Size of the Environment		*/
#define CFG_ENV_SECT_SIZE	0x10000 /* Size of the Environment Sector	*/

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_CACHELINE_SIZE	32
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
#endif

/*
 * L2 cache
 */
#undef CFG_L2
#define L2_INIT	  (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
		   L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
#define L2_ENABLE (L2_INIT | L2CR_L2E)

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM		0x02	/* Software reboot			*/

/*-----------------------------------------------------------------------
 * Disk-On-Chip configuration
 */

#define CFG_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/

#define CFG_DOC_SUPPORT_2000
#undef CFG_DOC_SUPPORT_MILLENNIUM

/*-----------------------------------------------------------------------
  RTC m48t59
*/
#define CONFIG_RTC_MK48T59

#define CONFIG_WATCHDOG

#define CONFIG_NET_MULTI		/* Multi ethernet cards support */

#define CONFIG_EEPRO100
#define CFG_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
#define CONFIG_TULIP


#define CONFIG_SCSI_SYM53C8XX
#define CONFIG_SCSI_DEV_ID	0x000B	/* 53c896 */
#define CFG_SCSI_MAX_LUN	8	/* number of supported LUNs */
#define CFG_SCSI_MAX_SCSI_ID	15	/* maximum SCSI ID (0..6) */
#define CFG_SCSI_MAX_DEVICE	CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */
#define CFG_SCSI_SPIN_UP_TIME	2
#define CFG_SCSI_SCAN_BUS_REVERSE 0
#define CONFIG_DOS_PARTITION
#define CONFIG_MAC_PARTITION
#define CONFIG_ISO_PARTITION

#endif	/* __CONFIG_H */
Commit	Line	Data
e2211743	1	/*
414eec35	2	* (C) Copyright 2002-2005
e2211743 WD	3	* Wolfgang Denk, DENX Software Engineering, [email protected].
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	*
	26	* Configuration settings for the PCIPPC-6 board.
	27	*
	28	*/
	29
	30	/* ------------------------------------------------------------------------- */
	31
	32	/*
	33	* board/config.h - configuration options, board specific
	34	*/
	35
	36	#ifndef __CONFIG_H
	37	#define __CONFIG_H
	38
	39	/*
	40	* High Level Configuration Options
	41	* (easy to change)
	42	*/
	43
	44	#define CONFIG_PCIPPC2 1 /* this is a PCIPPC2 board */
	45
c837dcb1	46	#define CONFIG_BOARD_EARLY_INIT_F 1
e2211743 WD	47	#define CONFIG_MISC_INIT_R 1
	48
	49	#define CONFIG_CONS_INDEX 1
	50	#define CONFIG_BAUDRATE 9600
	51	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	52
e2211743 WD	53	#define CONFIG_PREBOOT ""
	54	#define CONFIG_BOOTDELAY 5
	55
	56	#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT \| \
	57	CONFIG_BOOTP_BOOTFILESIZE)
	58
	59	#define CONFIG_MAC_PARTITION
	60	#define CONFIG_DOS_PARTITION
	61
414eec35 WD	62	#define CONFIG_COMMANDS (CONFIG_CMD_DFL \| \
	63	CFG_CMD_ASKENV \| \
	64	CFG_CMD_BSP \| \
	65	CFG_CMD_DATE \| \
	66	CFG_CMD_DHCP \| \
	67	CFG_CMD_DOC \| \
	68	CFG_CMD_ELF \| \
	69	CFG_CMD_NFS \| \
	70	CFG_CMD_PCI \| \
	71	CFG_CMD_SCSI \| \
	72	CFG_CMD_SNTP )
e2211743 WD	73
	74
	75	#define CONFIG_PCI 1
	76	#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */
	77
	78	/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
	79	*/
	80	#include <cmd_confdefs.h>
	81
	82
	83	/*
	84	* Miscellaneous configurable options
	85	*/
	86	#define CFG_LONGHELP /* undef to save memory */
	87	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	88
	89	#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
	90	#ifdef CFG_HUSH_PARSER
	91	#define CFG_PROMPT_HUSH_PS2 "> "
	92	#endif
	93	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	94
	95	/* Print Buffer Size
	96	*/
	97	#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
	98
	99	#define CFG_MAXARGS 64 /* max number of command args */
	100	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	101	#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
	102
	103	/*-----------------------------------------------------------------------
	104	* Start addresses for the final memory configuration
	105	* (Set up by the startup code)
	106	* Please note that CFG_SDRAM_BASE _must_ start at 0
	107	*/
	108	#define CFG_SDRAM_BASE 0x00000000
	109	#define CFG_FLASH_BASE 0xFFF00000
	110	#define CFG_FLASH_MAX_SIZE 0x00100000
	111	/* Maximum amount of RAM.
	112	*/
	113	#define CFG_MAX_RAM_SIZE 0x20000000 /* 512Mb */
	114
	115	#define CFG_RESET_ADDRESS 0xFFF00100
	116
	117	#define CFG_MONITOR_BASE TEXT_BASE
	118
	119	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	120	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	121
	122	#if CFG_MONITOR_BASE >= CFG_SDRAM_BASE && \
	123	CFG_MONITOR_BASE < CFG_SDRAM_BASE + CFG_MAX_RAM_SIZE
	124	#define CFG_RAMBOOT
	125	#else
	126	#undef CFG_RAMBOOT
	127	#endif
	128
	129	#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
	130	#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
	131
	132	/*-----------------------------------------------------------------------
	133	* Definitions for initial stack pointer and data area
	134	*/
	135
	136	/* Size in bytes reserved for initial data
137	*/
138	#define CFG_GBL_DATA_SIZE 128
139
140	#define CFG_INIT_RAM_ADDR 0x40000000
141	#define CFG_INIT_RAM_END 0x8000
142	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
143	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
144
145	#define CFG_INIT_RAM_LOCK
146
147	/*
148	* Temporary buffer for serial data until the real serial driver
149	* is initialised (memtest will destroy this buffer)
150	*/
151	#define CFG_SCONSOLE_ADDR CFG_INIT_RAM_ADDR
152	#define CFG_SCONSOLE_SIZE 0x0002000
153
154	/* SDRAM 0 - 256MB
155	*/
156	#define CFG_DBAT0L (CFG_SDRAM_BASE \| BATL_PP_10 \| BATL_MEMCOHERENCE)
157	#define CFG_DBAT0U (CFG_SDRAM_BASE \| \
158	BATU_BL_256M \| BATU_VS \| BATU_VP)
159	/* SDRAM 1 - 256MB
160	*/
161	#define CFG_DBAT1L ((CFG_SDRAM_BASE + 0x10000000) \| \
162	BATL_PP_10 \| BATL_MEMCOHERENCE)
163	#define CFG_DBAT1U ((CFG_SDRAM_BASE + 0x10000000) \| \
164	BATU_BL_256M \| BATU_VS \| BATU_VP)
165
166	/* Init RAM in the CPU DCache (no backing memory)
167	*/
168	#define CFG_DBAT2L (CFG_INIT_RAM_ADDR \| \
169	BATL_PP_10 \| BATL_MEMCOHERENCE)
170	#define CFG_DBAT2U (CFG_INIT_RAM_ADDR \| \
171	BATU_BL_128K \| BATU_VS \| BATU_VP)
172
173	/* I/O and PCI memory at 0xf0000000
174	*/
175	#define CFG_DBAT3L (0xf0000000 \| BATL_PP_10 \| BATL_CACHEINHIBIT)
176	#define CFG_DBAT3U (0xf0000000 \| BATU_BL_256M \| BATU_VS \| BATU_VP)
177
178	#define CFG_IBAT0L CFG_DBAT0L
179	#define CFG_IBAT0U CFG_DBAT0U
180	#define CFG_IBAT1L CFG_DBAT1L
181	#define CFG_IBAT1U CFG_DBAT1U
182	#define CFG_IBAT2L CFG_DBAT2L
183	#define CFG_IBAT2U CFG_DBAT2U
184	#define CFG_IBAT3L CFG_DBAT3L
185	#define CFG_IBAT3U CFG_DBAT3U
186
187	/*
188	* Low Level Configuration Settings
189	* (address mappings, register initial values, etc.)
190	* You should know what you are doing if you make changes here.
191	* For the detail description refer to the PCIPPC2 user's manual.
192	*/
193	#define CFG_HZ 1000
194	#define CFG_BUS_HZ 100000000 /* bus speed - 100 mhz */
195	#define CFG_CPU_CLK 300000000
196	#define CFG_BUS_CLK 100000000
197
198	/*
199	* For booting Linux, the board info and command line data
200	* have to be in the first 8 MB of memory, since this is
201	* the maximum mapped by the Linux kernel during initialization.
202	*/
203	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
204
205	/*-----------------------------------------------------------------------
206	* FLASH organization
207	*/
208	#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
209	#define CFG_MAX_FLASH_SECT 16 /* Max number of sectors in one bank */
210
211	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
212	#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
213
214	/*
215	* Note: environment is not EMBEDDED in the U-Boot code.
216	* It's stored in flash separately.
217	*/
218	#define CFG_ENV_IS_IN_FLASH 1
219	#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x70000)
220	#define CFG_ENV_SIZE 0x1000 /* Size of the Environment */
221	#define CFG_ENV_SECT_SIZE 0x10000 /* Size of the Environment Sector */
222
223	/*-----------------------------------------------------------------------
224	* Cache Configuration
225	*/
226	#define CFG_CACHELINE_SIZE 32
227	#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
228	# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
229	#endif
230
231	/*
232	* L2 cache
233	*/
234	#undef CFG_L2
235	#define L2_INIT (L2CR_L2SIZ_2M \| L2CR_L2CLK_3 \| L2CR_L2RAM_BURST \| \
236	L2CR_L2OH_5 \| L2CR_L2CTL \| L2CR_L2WT)
237	#define L2_ENABLE (L2_INIT \| L2CR_L2E)
238
239	/*
240	* Internal Definitions
241	*
242	* Boot Flags
243	*/
244	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
245	#define BOOTFLAG_WARM 0x02 /* Software reboot */
246
247	/*-----------------------------------------------------------------------
248	* Disk-On-Chip configuration
249	*/
250
251	#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */
252
253	#define CFG_DOC_SUPPORT_2000
254	#undef CFG_DOC_SUPPORT_MILLENNIUM
255
256	/*-----------------------------------------------------------------------
257	RTC m48t59
258	*/
259	#define CONFIG_RTC_MK48T59
260
261	#define CONFIG_WATCHDOG
262
263	#define CONFIG_NET_MULTI /* Multi ethernet cards support */
264
265	#define CONFIG_EEPRO100
53cf9435	266	#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
e2211743 WD	267	#define CONFIG_TULIP
	268
	269
	270	#define CONFIG_SCSI_SYM53C8XX
	271	#define CONFIG_SCSI_DEV_ID 0x000B /* 53c896 */
	272	#define CFG_SCSI_MAX_LUN 8 /* number of supported LUNs */
	273	#define CFG_SCSI_MAX_SCSI_ID 15 /* maximum SCSI ID (0..6) */
	274	#define CFG_SCSI_MAX_DEVICE CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */
	275	#define CFG_SCSI_SPIN_UP_TIME 2
	276	#define CFG_SCSI_SCAN_BUS_REVERSE 0
	277	#define CONFIG_DOS_PARTITION
	278	#define CONFIG_MAC_PARTITION
	279	#define CONFIG_ISO_PARTITION
	280
e2211743	281	#endif /* __CONFIG_H */