[J-u-boot.git] / include / configs / da830evm.h

/*
 * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com>
 *
 * Based on davinci_dvevm.h. Original Copyrights follow:
 *
 * Copyright (C) 2007 Sergey Kubushyn <[email protected]>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * Board
 */
#define CONFIG_DRIVER_TI_EMAC

/*
 * SoC Configuration
 */
#define CONFIG_MACH_DAVINCI_DA830_EVM
#define CONFIG_ARM926EJS		/* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX		/* TI DA8xx SoC */
#define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
#define CONFIG_SYS_OSCIN_FREQ		24000000
#define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
#define CONFIG_SYS_HZ			1000
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_TEXT_BASE		0xc1080000

/*
 * Memory Info
 */
#define CONFIG_SYS_MALLOC_LEN	(0x10000 + 1*1024*1024) /* malloc() len */
#define PHYS_SDRAM_1			0xc0000000 /* SDRAM Start */
#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1 /* memtest start addr */
#define CONFIG_SYS_MEMTEST_END 	(PHYS_SDRAM_1 + 16*1024*1024) /* 16MB test */
#define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
#define CONFIG_STACKSIZE	(256*1024) /* regular stack */

/*
 * Serial Driver info
 */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
#define CONFIG_SYS_NS16550_COM1	DAVINCI_UART2_BASE /* Base address of UART2 */
#define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
#define CONFIG_BAUDRATE		115200		/* Default baud rate */
#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * I2C Configuration
 */
#define CONFIG_HARD_I2C
#define CONFIG_DRIVER_DAVINCI_I2C
#define CONFIG_SYS_I2C_SPEED		25000 /* 100Kbps won't work, H/W bug */
#define CONFIG_SYS_I2C_SLAVE		10 /* Bogus, master-only in U-Boot */

/*
 * I2C EEPROM definitions for catalyst 24W256 EEPROM chip
 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20

/*
 * Network & Ethernet Configuration
 */
#ifdef CONFIG_DRIVER_TI_EMAC
#define CONFIG_EMAC_MDIO_PHY_NUM	1
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_NET_RETRY_COUNT	10
#define CONFIG_NET_MULTI
#endif

/*
 * Flash & Environment
 */
#ifdef CONFIG_USE_NAND
#undef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_NAND_DAVINCI
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
#define CONFIG_ENV_OFFSET		(512 << 10)
#define CONFIG_ENV_SIZE			(512 << 10)
#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
#define CONFIG_SYS_NAND_CS		3
#define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
#define CONFIG_SYS_NAND_PAGE_2K
#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
#define CONFIG_SYS_CLE_MASK		0x10
#define CONFIG_SYS_ALE_MASK		0x8
#define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
#define NAND_MAX_CHIPS			1
#endif

#ifdef CONFIG_USE_NOR
#define CONFIG_ENV_IS_IN_FLASH
#undef CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* max number of flash banks */
#define CONFIG_SYS_FLASH_SECT_SZ	(64 << 10) /* 64KB */
#define CONFIG_ENV_OFFSET		(CONFIG_SYS_FLASH_SECT_SZ*3)
#define CONFIG_SYS_FLASH_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
#define PHYS_FLASH_SIZE			(32 << 20) /* Flash size 32MB */
#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)
#define CONFIG_ENV_SECT_SIZE		CONFIG_SYS_FLASH_SECT_SZ
#define CONFIG_SYS_FLASH_SPL_ACCESS
#endif

#ifdef CONFIG_USE_SPIFLASH
#undef CONFIG_ENV_IS_IN_FLASH
#undef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE			(16 << 10)
#define CONFIG_ENV_OFFSET		(256 << 10)
#define CONFIG_ENV_SECT_SIZE		4096
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SPI
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_DAVINCI_SPI
#define CONFIG_SYS_SPI_BASE		DAVINCI_SPI0_BASE
#define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI0_CLKID)
#define CONFIG_SF_DEFAULT_SPEED		50000000
#define CONFIG_SYS_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
#endif

/*
 * USB configuration
 */
#define CONFIG_USB_DA8XX	/* Platform hookup to MUSB controller */
#define CONFIG_MUSB_HCD

/*
 * U-Boot general configuration
 */
#undef CONFIG_USE_IRQ			/* No IRQ/FIQ in U-Boot */
#undef CONFIG_MISC_INIT_R
#undef CONFIG_BOOTDELAY
#define CONFIG_BOOTFILE		"uImage" /* Boot file name */
#define CONFIG_SYS_PROMPT	"DA830-evm > " /* Command Prompt */
#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS	16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_MEMTEST_START + 0x700000)
#define CONFIG_VERSION_VARIABLE
#define CONFIG_AUTO_COMPLETE	/* Won't work with hush so far, may be later */
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_LONGHELP
#define CONFIG_CRC32_VERIFY
#define CONFIG_MX_CYCLIC

/*
 * Linux Information
 */
#define LINUX_BOOT_PARAM_ADDR	(CONFIG_SYS_MEMTEST_START + 0x100)
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTARGS		"mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp"
#define CONFIG_BOOTCOMMAND	""
#define CONFIG_BOOTDELAY	3

/*
 * U-Boot commands
 */
#include <config_cmd_default.h>
#define CONFIG_CMD_ENV
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_MEMORY
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_SETGETDCR
#define CONFIG_CMD_EEPROM

#ifndef CONFIG_DRIVER_TI_EMAC
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_DHCP
#undef CONFIG_CMD_MII
#undef CONFIG_CMD_PING
#endif

#ifdef CONFIG_USE_NAND
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_NAND
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#endif

#ifdef CONFIG_USE_SPIFLASH
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_FLASH
#define CONFIG_CMD_SPI
#define CONFIG_CMD_SAVEENV
#endif

#if !defined(CONFIG_USE_NAND) && \
	!defined(CONFIG_USE_NOR) && \
	!defined(CONFIG_USE_SPIFLASH)
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_SIZE		(16 << 10)
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_FLASH
#undef CONFIG_CMD_ENV
#endif

#ifdef CONFIG_USB_DA8XX

#ifdef CONFIG_MUSB_HCD		/* include support for usb host */
#define CONFIG_CMD_USB		/* include support for usb cmd */

#define CONFIG_USB_STORAGE	/* MSC class support */
#define CONFIG_CMD_STORAGE	/* inclue support for usb-storage cmd */
#define CONFIG_CMD_FAT		/* inclue support for FAT/storage */
#define CONFIG_DOS_PARTITION	/* inclue support for FAT/storage */

#ifdef CONFIG_USB_KEYBOARD	/* HID class support */
#define CONFIG_SYS_USB_EVENT_POLL
#define CONFIG_PREBOOT "usb start"
#endif /* CONFIG_USB_KEYBOARD */

#endif /* CONFIG_MUSB_HCD */

#ifdef CONFIG_MUSB_UDC
/* USB device configuration */
#define CONFIG_USB_DEVICE		1
#define CONFIG_USB_TTY			1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
/* Change these to suit your needs */
#define CONFIG_USBD_VENDORID		0x0451
#define CONFIG_USBD_PRODUCTID		0x5678
#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
#define CONFIG_USBD_PRODUCT_NAME	"DA830EVM"
#endif /* CONFIG_MUSB_UDC */

#endif /* CONFIG_USB_DA8XX */

#ifdef CONFIG_MTD_PARTITIONS
#define MTDIDS_DEFAULT		"nand0=davinci_nand.1"
#define PART_BOOT		"512k(bootloader)ro,"
#define PART_PARAMS		"512k(params)ro,"
#define PART_KERNEL		"4m(kernel),"
#define PART_REST		"-(filesystem)"
#define MTDPARTS_DEFAULT        \
	"mtdparts=davinci_nand.1:" PART_BOOT PART_PARAMS PART_KERNEL PART_REST
#endif

#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/

/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR		\
	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)

#endif /* __CONFIG_H */
Commit	Line	Data
2819e136 SN	1	/*
	2	* Copyright (C) 2008 Texas Instruments, Inc <www.ti.com>
	3	*
	4	* Based on davinci_dvevm.h. Original Copyrights follow:
	5	*
	6	* Copyright (C) 2007 Sergey Kubushyn <[email protected]>
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	#ifndef __CONFIG_H
	25	#define __CONFIG_H
	26
	27	/*
	28	* Board
	29	*/
37cffdad	30	#define CONFIG_DRIVER_TI_EMAC
2819e136 SN	31
	32	/*
	33	* SoC Configuration
	34	*/
	35	#define CONFIG_MACH_DAVINCI_DA830_EVM
	36	#define CONFIG_ARM926EJS /* arm926ejs CPU core */
	37	#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
	38	#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
	39	#define CONFIG_SYS_OSCIN_FREQ 24000000
	40	#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
	41	#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
	42	#define CONFIG_SYS_HZ 1000
	43	#define CONFIG_SKIP_LOWLEVEL_INIT
f760d14a	44	#define CONFIG_SYS_TEXT_BASE 0xc1080000
2819e136 SN	45
	46	/*
	47	* Memory Info
	48	*/
	49	#define CONFIG_SYS_MALLOC_LEN (0x10000 + 110241024) /* malloc() len */
f35d61ac	50	#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Start */
2819e136 SN	51	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 /* memtest start addr */
	52	#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 1610241024) /* 16MB test */
	53	#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
	54	#define CONFIG_STACKSIZE (2561024) / regular stack */
	55
	56	/*
	57	* Serial Driver info
	58	*/
	59	#define CONFIG_SYS_NS16550
	60	#define CONFIG_SYS_NS16550_SERIAL
	61	#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
	62	#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
	63	#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
	64	#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
	65	#define CONFIG_BAUDRATE 115200 /* Default baud rate */
	66	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	67
	68	/*
	69	* I2C Configuration
	70	*/
	71	#define CONFIG_HARD_I2C
	72	#define CONFIG_DRIVER_DAVINCI_I2C
	73	#define CONFIG_SYS_I2C_SPEED 25000 /* 100Kbps won't work, H/W bug */
	74	#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
	75
	76	/*
	77	* I2C EEPROM definitions for catalyst 24W256 EEPROM chip
	78	*/
	79	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	80	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	81	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
	82	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
	83
	84	/*
	85	* Network & Ethernet Configuration
	86	*/
	87	#ifdef CONFIG_DRIVER_TI_EMAC
e6441c4f	88	#define CONFIG_EMAC_MDIO_PHY_NUM 1
2819e136 SN	89	#define CONFIG_MII
	90	#define CONFIG_BOOTP_DEFAULT
	91	#define CONFIG_BOOTP_DNS
	92	#define CONFIG_BOOTP_DNS2
	93	#define CONFIG_BOOTP_SEND_HOSTNAME
	94	#define CONFIG_NET_RETRY_COUNT 10
	95	#define CONFIG_NET_MULTI
	96	#endif
	97
	98	/*
	99	* Flash & Environment
	100	*/
	101	#ifdef CONFIG_USE_NAND
	102	#undef CONFIG_ENV_IS_IN_FLASH
	103	#define CONFIG_NAND_DAVINCI
	104	#define CONFIG_SYS_NO_FLASH
	105	#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
3a4e4392 NT	106	#define CONFIG_ENV_OFFSET (512 << 10)
3a4e4392 NT	107	#define CONFIG_ENV_SIZE (512 << 10)
2819e136 SN	108	#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
	109	#define CONFIG_SYS_NAND_CS 3
	110	#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
3a4e4392 NT	111	#define CONFIG_SYS_NAND_PAGE_2K
3a4e4392 NT	112	#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
2819e136 SN	113	#define CONFIG_SYS_CLE_MASK 0x10
2819e136 SN	114	#define CONFIG_SYS_ALE_MASK 0x8
2819e136 SN	115	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
2819e136 SN	116	#define NAND_MAX_CHIPS 1
2819e136 SN	117	#endif
	118
	119	#ifdef CONFIG_USE_NOR
	120	#define CONFIG_ENV_IS_IN_FLASH
	121	#undef CONFIG_SYS_NO_FLASH
	122	#define CONFIG_SYS_FLASH_CFI_DRIVER
	123	#define CONFIG_SYS_FLASH_CFI
	124	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
	125	#define CONFIG_SYS_FLASH_SECT_SZ (64 << 10) /* 64KB */
	126	#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3)
	127	#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
	128	#define PHYS_FLASH_SIZE (32 << 20) /* Flash size 32MB */
	129	#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)
	130	#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ
	131	#define CONFIG_SYS_FLASH_SPL_ACCESS
	132	#endif
	133
	134	#ifdef CONFIG_USE_SPIFLASH
	135	#undef CONFIG_ENV_IS_IN_FLASH
	136	#undef CONFIG_ENV_IS_IN_NAND
	137	#define CONFIG_ENV_IS_IN_SPI_FLASH
	138	#define CONFIG_ENV_SIZE (16 << 10)
	139	#define CONFIG_ENV_OFFSET (256 << 10)
	140	#define CONFIG_ENV_SECT_SIZE 4096
	141	#define CONFIG_SYS_NO_FLASH
	142	#define CONFIG_SPI
	143	#define CONFIG_SPI_FLASH
	144	#define CONFIG_SPI_FLASH_WINBOND
	145	#define CONFIG_DAVINCI_SPI
	146	#define CONFIG_SYS_SPI_BASE DAVINCI_SPI0_BASE
	147	#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID)
	148	#define CONFIG_SF_DEFAULT_SPEED 50000000
	149	#define CONFIG_SYS_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	150	#endif
	151
7b429288 AKG	152	/*
	153	* USB configuration
	154	*/
	155	#define CONFIG_USB_DA8XX /* Platform hookup to MUSB controller */
	156	#define CONFIG_MUSB_HCD
2819e136 SN	157
	158	/*
	159	* U-Boot general configuration
	160	*/
	161	#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
	162	#undef CONFIG_MISC_INIT_R
	163	#undef CONFIG_BOOTDELAY
	164	#define CONFIG_BOOTFILE "uImage" /* Boot file name */
	165	#define CONFIG_SYS_PROMPT "DA830-evm > " /* Command Prompt */
	166	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	167	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	168	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	169	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
	170	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + 0x700000)
	171	#define CONFIG_VERSION_VARIABLE
	172	#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
	173	#define CONFIG_SYS_HUSH_PARSER
	174	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	175	#define CONFIG_CMDLINE_EDITING
	176	#define CONFIG_SYS_LONGHELP
	177	#define CONFIG_CRC32_VERIFY
	178	#define CONFIG_MX_CYCLIC
	179
	180	/*
	181	* Linux Information
	182	*/
	183	#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100)
	184	#define CONFIG_CMDLINE_TAG
	185	#define CONFIG_SETUP_MEMORY_TAGS
	186	#define CONFIG_BOOTARGS "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp"
	187	#define CONFIG_BOOTCOMMAND ""
	188	#define CONFIG_BOOTDELAY 3
	189
	190	/*
	191	* U-Boot commands
	192	*/
	193	#include <config_cmd_default.h>
	194	#define CONFIG_CMD_ENV
	195	#define CONFIG_CMD_ASKENV
	196	#define CONFIG_CMD_DHCP
	197	#define CONFIG_CMD_DIAG
	198	#define CONFIG_CMD_MII
	199	#define CONFIG_CMD_PING
	200	#define CONFIG_CMD_SAVES
	201	#define CONFIG_CMD_MEMORY
	202	#undef CONFIG_CMD_FPGA
	203	#undef CONFIG_CMD_SETGETDCR
	204	#define CONFIG_CMD_EEPROM
	205
	206	#ifndef CONFIG_DRIVER_TI_EMAC
	207	#undef CONFIG_CMD_NET
	208	#undef CONFIG_CMD_DHCP
	209	#undef CONFIG_CMD_MII
	210	#undef CONFIG_CMD_PING
	211	#endif
	212
	213	#ifdef CONFIG_USE_NAND
	214	#undef CONFIG_CMD_FLASH
	215	#undef CONFIG_CMD_IMLS
	216	#define CONFIG_CMD_NAND
	217	#define CONFIG_CMD_MTDPARTS
	218	#define CONFIG_MTD_PARTITIONS
3a4e4392	219	#define CONFIG_MTD_DEVICE
2819e136 SN	220	#endif
	221
	222	#ifdef CONFIG_USE_SPIFLASH
	223	#undef CONFIG_CMD_IMLS
	224	#undef CONFIG_CMD_FLASH
	225	#define CONFIG_CMD_SPI
	226	#define CONFIG_CMD_SAVEENV
	227	#endif
	228
	229	#if !defined(CONFIG_USE_NAND) && \
	230	!defined(CONFIG_USE_NOR) && \
	231	!defined(CONFIG_USE_SPIFLASH)
	232	#define CONFIG_ENV_IS_NOWHERE
	233	#define CONFIG_SYS_NO_FLASH
	234	#define CONFIG_ENV_SIZE (16 << 10)
	235	#undef CONFIG_CMD_IMLS
	236	#undef CONFIG_CMD_FLASH
	237	#undef CONFIG_CMD_ENV
	238	#endif
	239
	240	#ifdef CONFIG_USB_DA8XX
2819e136	241
7b429288 AKG	242	#ifdef CONFIG_MUSB_HCD /* include support for usb host */
	243	#define CONFIG_CMD_USB /* include support for usb cmd */
	244
	245	#define CONFIG_USB_STORAGE /* MSC class support */
	246	#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */
	247	#define CONFIG_CMD_FAT /* inclue support for FAT/storage */
	248	#define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */
	249
	250	#ifdef CONFIG_USB_KEYBOARD /* HID class support */
	251	#define CONFIG_SYS_USB_EVENT_POLL
	252	#define CONFIG_PREBOOT "usb start"
	253	#endif /* CONFIG_USB_KEYBOARD */
	254
	255	#endif /* CONFIG_MUSB_HCD */
	256
	257	#ifdef CONFIG_MUSB_UDC
	258	/* USB device configuration */
	259	#define CONFIG_USB_DEVICE 1
	260	#define CONFIG_USB_TTY 1
	261	#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
	262	/* Change these to suit your needs */
	263	#define CONFIG_USBD_VENDORID 0x0451
	264	#define CONFIG_USBD_PRODUCTID 0x5678
	265	#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
	266	#define CONFIG_USBD_PRODUCT_NAME "DA830EVM"
	267	#endif /* CONFIG_MUSB_UDC */
	268
	269	#endif /* CONFIG_USB_DA8XX */
3a4e4392 NT	270
	271	#ifdef CONFIG_MTD_PARTITIONS
	272	#define MTDIDS_DEFAULT "nand0=davinci_nand.1"
	273	#define PART_BOOT "512k(bootloader)ro,"
	274	#define PART_PARAMS "512k(params)ro,"
	275	#define PART_KERNEL "4m(kernel),"
	276	#define PART_REST "-(filesystem)"
	277	#define MTDPARTS_DEFAULT \
	278	"mtdparts=davinci_nand.1:" PART_BOOT PART_PARAMS PART_KERNEL PART_REST
	279	#endif
	280
f35d61ac NT	281	#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
	282
	283	/* additions for new relocation code, must be added to all boards */
	284	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	285	#define CONFIG_SYS_INIT_SP_ADDR \
	286	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
	287
2819e136	288	#endif /* __CONFIG_H */