[J-u-boot.git] / include / configs / v37.h

/*
 * (C) Copyright 2000, 2001
 * Wolfgang Denk, DENX Software Engineering, [email protected].
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC823		1	/* This is a MPC823 CPU		*/
#define CONFIG_V37		1	/* ...on a Marel V37 board 	*/

#define CONFIG_LCD
#define CONFIG_SHARP_LQ084V1DG21
#undef CONFIG_LCD_LOGO

/*-----------------------------------------------------------------------------
 * I2C Configuration
 *-----------------------------------------------------------------------------
 */
#define CONFIG_I2C              1
#define CFG_I2C_SLAVE           0x2

#define	CONFIG_8xx_CONS_SMC1	1
#undef	CONFIG_8xx_CONS_SMC2		/* Console is on SMC2		*/
#undef	CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE		9600	/* console baudrate = 115kbps	*/
#if 0
#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
#else
#define CONFIG_BOOTDELAY	2	/* autoboot after 2 seconds	*/
#endif

#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
#define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"

#undef	CONFIG_BOOTARGS

#define CONFIG_BOOTCOMMAND							\
	"tftpboot; " 								\
	"setenv bootargs console=tty0 "                                   \
	"root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "		 	\
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " 	\
	"bootm"

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/

#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

#define	CONFIG_CAN_DRIVER	1	/* CAN Driver support enabled	*/

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE


#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION

#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_DATE


/*
 * JFFS2 partitions
 *
 */
/* No command line, one static partition, whole device */
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV		"nor1"
#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET	0x00000000

/* mtdparts command line support */
/* Note: fake mtd_id used, no linux mtd map file */
/*
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT		"nor1=v37-1"
#define MTDPARTS_DEFAULT	"mtdparts=v37-1:-(jffs2)"
*/

/*
 * Miscellaneous configurable options
 */
#define	CFG_LONGHELP			/* undef to save memory		*/
#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define	CFG_MAXARGS	16		/* max number of command args	*/
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/

#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/

#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/

#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*-----------------------------------------------------------------------
 * Internal Memory Mapped Register
 */
#define CFG_IMMR		0xF0000000

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CFG_INIT_RAM_ADDR	CFG_IMMR
#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define	CFG_SDRAM_BASE		0x00000000
#define CFG_FLASH_BASE0		0x40000000
#define CFG_FLASH_BASE1		0x60000000
#define CFG_FLASH_BASE		CFG_FLASH_BASE1

#if defined(DEBUG)
#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
#else
#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
#endif
#define CFG_MONITOR_BASE	CFG_FLASH_BASE0
#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
#define CFG_MAX_FLASH_SECT	35	/* max number of sectors on one chip	*/

#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

#define	CFG_ENV_IS_IN_NVRAM	1
#define	CFG_ENV_ADDR		0x80000000/* Address of Environment */
#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/

#define CFG_ENV_OFFSET		0

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
#endif

/*-----------------------------------------------------------------------
 * SYPCR - System Protection Control				11-9
 * SYPCR can only be written once after reset!
 *-----------------------------------------------------------------------
 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 */
#if defined(CONFIG_WATCHDOG)
#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
#else
#define CFG_SYPCR	0xFFFFFF88
#endif

/*-----------------------------------------------------------------------
 * SIUMCR - SIU Module Configuration				11-6
 *-----------------------------------------------------------------------
 * PCMCIA config., multi-function pin tri-state
 */
#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_FRC | SIUMCR_GB5E)

/*-----------------------------------------------------------------------
 * TBSCR - Time Base Status and Control				11-26
 *-----------------------------------------------------------------------
 * Clear Reference Interrupt Status, Timebase freezing enabled
 */
#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)

/*-----------------------------------------------------------------------
 * RTCSC - Real-Time Clock Status and Control Register		11-27
 *-----------------------------------------------------------------------
 */
/*%%%#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */
#define CFG_RTCSC	(RTCSC_SEC | RTCSC_RTE)

/*-----------------------------------------------------------------------
 * PISCR - Periodic Interrupt Status and Control		11-31
 *-----------------------------------------------------------------------
 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 */
#define CFG_PISCR (PISCR_PS | PISCR_PITF)
/*
#define CFG_PISCR (PISCR_PS | PISCR_PITF)
*/

/*-----------------------------------------------------------------------
 * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
 *-----------------------------------------------------------------------
 * Reset PLL lock status sticky bit, timer expired status bit and timer
 * interrupt status bit
 *
 * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
 */
/* up to 50 MHz we use a 1:1 clock */
#define CFG_PLPRCR	( (1524 << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TMIST | PLPRCR_TEXPS )

/*-----------------------------------------------------------------------
 * SCCR - System Clock and reset Control Register		15-27
 *-----------------------------------------------------------------------
 * Set clock output, timebase and RTC source and divider,
 * power management and some other internal clocks
 */
#define SCCR_MASK	SCCR_EBDF11
/* up to 50 MHz we use a 1:1 clock */
#define CFG_SCCR	(SCCR_COM00 | SCCR_TBS)

/*-----------------------------------------------------------------------
 * PCMCIA stuff
 *-----------------------------------------------------------------------
 *
 */
#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )

/*-----------------------------------------------------------------------
 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 *-----------------------------------------------------------------------
 */

#undef	CONFIG_IDE_PCCARD		/* Use IDE with PC Card	Adapter	*/

#undef	CONFIG_IDE_PCMCIA		/* Direct IDE    not supported	*/
#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/

#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/

#define CFG_ATA_IDE0_OFFSET	0x0000

#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR

/* Offset for data I/O			*/
#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)

/* Offset for normal register accesses	*/
#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)

/* Offset for alternate registers	*/
#define CFG_ATA_ALT_OFFSET	0x0100

/*-----------------------------------------------------------------------
 *
 *-----------------------------------------------------------------------
 *
 */
#define CFG_DER	0

/*
 * Init Memory Controller:
 *
 * BR0 and OR0 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #1	*/

#define CFG_PRELIM_OR_AM	0xFE000000	/* OR addr mask */

#define CFG_OR_TIMING_FLASH 	0xF56

#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V)

#define CFG_OR5_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
#define CFG_BR5_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V)

/*
 * BR1 and OR1 (Battery backed SRAM)
 */
#define	CFG_BR1_PRELIM	0x80000401
#define CFG_OR1_PRELIM	0xFFC00736

/*
 * BR2 and OR2 (SDRAM)
 */
#define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM base	*/
#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB */

#define CFG_OR_TIMING_SDRAM	0x00000A00

#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
#define CFG_BR2_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )

/* Marel V37 mem setting */

#define	CFG_BR3_CAN	0xC0000401
#define CFG_OR3_CAN	0xFFFF0724

/*
#define	CFG_BR3_PRELIM	0xFA400001
#define CFG_OR3_PRELIM	0xFFFF8910
#define	CFG_BR4_PRELIM	0xFA000401
#define CFG_OR4_PRELIM	0xFFFE0970
*/

/*
 * Memory Periodic Timer Prescaler
 */

/* periodic timer for refresh */
#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/

/*
 * Refresh clock Prescalar
 */
#define CFG_MPTPR	MPTPR_PTP_DIV16

/*
 * MAMR settings for SDRAM
 */

/* 10 column SDRAM */
#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 |	\
			 MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X)

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#endif	/* __CONFIG_H */
Commit	Line	Data
608c9146 WD	1	/*
	2	* (C) Copyright 2000, 2001
	3	* Wolfgang Denk, DENX Software Engineering, [email protected].
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options
	33	* (easy to change)
	34	*/
	35
	36	#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
	37	#define CONFIG_V37 1 /* ...on a Marel V37 board */
	38
	39	#define CONFIG_LCD
	40	#define CONFIG_SHARP_LQ084V1DG21
	41	#undef CONFIG_LCD_LOGO
	42
	43	/*-----------------------------------------------------------------------------
	44	* I2C Configuration
	45	*-----------------------------------------------------------------------------
	46	*/
	47	#define CONFIG_I2C 1
	48	#define CFG_I2C_SLAVE 0x2
	49
	50	#define CONFIG_8xx_CONS_SMC1 1
	51	#undef CONFIG_8xx_CONS_SMC2 /* Console is on SMC2 */
	52	#undef CONFIG_8xx_CONS_NONE
	53	#define CONFIG_BAUDRATE 9600 /* console baudrate = 115kbps */
	54	#if 0
	55	#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
	56	#else
	57	#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
	58	#endif
	59
	60	#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
	61	#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
	62
	63	#undef CONFIG_BOOTARGS
	64
65	#define CONFIG_BOOTCOMMAND \
66	"tftpboot; " \
67	"setenv bootargs console=tty0 " \
fe126d8b WD	68	"root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
fe126d8b WD	69	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
608c9146 WD	70	"bootm"
	71
	72	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	73	#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
	74
	75	#undef CONFIG_WATCHDOG /* watchdog disabled */
	76
	77	#define CONFIG_CAN_DRIVER 1 /* CAN Driver support enabled */
	78
d3b8c1a7 JL	79	/*
	80	* BOOTP options
	81	*/
	82	#define CONFIG_BOOTP_SUBNETMASK
	83	#define CONFIG_BOOTP_GATEWAY
	84	#define CONFIG_BOOTP_HOSTNAME
	85	#define CONFIG_BOOTP_BOOTPATH
	86	#define CONFIG_BOOTP_BOOTFILESIZE
	87
608c9146 WD	88
	89	#define CONFIG_MAC_PARTITION
	90	#define CONFIG_DOS_PARTITION
	91
	92	#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
	93
dca3b3d6 JL	94
	95	/*
	96	* Command line configuration.
	97	*/
	98	#include <config_cmd_default.h>
	99
	100	#define CONFIG_CMD_JFFS2
	101	#define CONFIG_CMD_DATE
	102
608c9146	103
700a0c64 WD	104	/*
	105	* JFFS2 partitions
	106	*
	107	*/
	108	/* No command line, one static partition, whole device */
	109	#undef CONFIG_JFFS2_CMDLINE
	110	#define CONFIG_JFFS2_DEV "nor1"
	111	#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
	112	#define CONFIG_JFFS2_PART_OFFSET 0x00000000
	113
	114	/* mtdparts command line support */
	115	/* Note: fake mtd_id used, no linux mtd map file */
	116	/*
	117	#define CONFIG_JFFS2_CMDLINE
	118	#define MTDIDS_DEFAULT "nor1=v37-1"
	119	#define MTDPARTS_DEFAULT "mtdparts=v37-1:-(jffs2)"
	120	*/
608c9146	121
608c9146 WD	122	/*
	123	* Miscellaneous configurable options
	124	*/
	125	#define CFG_LONGHELP /* undef to save memory */
	126	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
dca3b3d6	127	#if defined(CONFIG_CMD_KGDB)
608c9146 WD	128	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	129	#else
	130	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	131	#endif
	132	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	133	#define CFG_MAXARGS 16 /* max number of command args */
	134	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	135
	136	#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
	137	#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
	138
	139	#define CFG_LOAD_ADDR 0x100000 /* default load address */
	140
	141	#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
	142
	143	#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	144
	145	/*
	146	* Low Level Configuration Settings
	147	* (address mappings, register initial values, etc.)
	148	* You should know what you are doing if you make changes here.
	149	*/
	150	/*-----------------------------------------------------------------------
	151	* Internal Memory Mapped Register
	152	*/
	153	#define CFG_IMMR 0xF0000000
	154
	155	/*-----------------------------------------------------------------------
	156	* Definitions for initial stack pointer and data area (in DPRAM)
	157	*/
	158	#define CFG_INIT_RAM_ADDR CFG_IMMR
	159	#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
	160	#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	161	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	162	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
	163
	164	/*-----------------------------------------------------------------------
	165	* Start addresses for the final memory configuration
	166	* (Set up by the startup code)
	167	* Please note that CFG_SDRAM_BASE _must_ start at 0
	168	*/
	169	#define CFG_SDRAM_BASE 0x00000000
	170	#define CFG_FLASH_BASE0 0x40000000
	171	#define CFG_FLASH_BASE1 0x60000000
	172	#define CFG_FLASH_BASE CFG_FLASH_BASE1
	173
	174	#if defined(DEBUG)
	175	#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	176	#else
	177	#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
	178	#endif
	179	#define CFG_MONITOR_BASE CFG_FLASH_BASE0
	180	#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
	181
	182	/*
	183	* For booting Linux, the board info and command line data
	184	* have to be in the first 8 MB of memory, since this is
	185	* the maximum mapped by the Linux kernel during initialization.
	186	*/
	187	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
	188
	189	/*-----------------------------------------------------------------------
	190	* FLASH organization
	191	*/
192	#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
193	#define CFG_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
194
195	#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
196	#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
197
198	#define CFG_ENV_IS_IN_NVRAM 1
199	#define CFG_ENV_ADDR 0x80000000/* Address of Environment */
200	#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
201
202	#define CFG_ENV_OFFSET 0
203
204	/*-----------------------------------------------------------------------
205	* Cache Configuration
206	*/
207	#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
dca3b3d6	208	#if defined(CONFIG_CMD_KGDB)
608c9146 WD	209	#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
	210	#endif
	211
	212	/*-----------------------------------------------------------------------
	213	* SYPCR - System Protection Control 11-9
	214	* SYPCR can only be written once after reset!
	215	*-----------------------------------------------------------------------
	216	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	217	*/
	218	#if defined(CONFIG_WATCHDOG)
	219	#define CFG_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
	220	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
	221	#else
	222	#define CFG_SYPCR 0xFFFFFF88
	223	#endif
	224
	225	/*-----------------------------------------------------------------------
	226	* SIUMCR - SIU Module Configuration 11-6
	227	*-----------------------------------------------------------------------
	228	* PCMCIA config., multi-function pin tri-state
	229	*/
	230	#define CFG_SIUMCR (SIUMCR_DBGC00 \| SIUMCR_DBPC00 \| SIUMCR_FRC \| SIUMCR_GB5E)
	231
	232	/*-----------------------------------------------------------------------
	233	* TBSCR - Time Base Status and Control 11-26
	234	*-----------------------------------------------------------------------
	235	* Clear Reference Interrupt Status, Timebase freezing enabled
	236	*/
	237	#define CFG_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBE)
	238
	239	/*-----------------------------------------------------------------------
	240	* RTCSC - Real-Time Clock Status and Control Register 11-27
	241	*-----------------------------------------------------------------------
	242	*/
	243	/%%%#define CFG_RTCSC (RTCSC_SEC \| RTCSC_ALR \| RTCSC_RTF\| RTCSC_RTE) /
	244	#define CFG_RTCSC (RTCSC_SEC \| RTCSC_RTE)
	245
	246	/*-----------------------------------------------------------------------
	247	* PISCR - Periodic Interrupt Status and Control 11-31
	248	*-----------------------------------------------------------------------
	249	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	250	*/
	251	#define CFG_PISCR (PISCR_PS \| PISCR_PITF)
	252	/*
	253	#define CFG_PISCR (PISCR_PS \| PISCR_PITF)
	254	*/
	255
	256	/*-----------------------------------------------------------------------
	257	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	258	*-----------------------------------------------------------------------
	259	* Reset PLL lock status sticky bit, timer expired status bit and timer
	260	* interrupt status bit
	261	*
	262	* If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
	263	*/
	264	/* up to 50 MHz we use a 1:1 clock */
	265	#define CFG_PLPRCR ( (1524 << PLPRCR_MF_SHIFT) \| PLPRCR_SPLSS \| PLPRCR_TMIST \| PLPRCR_TEXPS )
	266
	267	/*-----------------------------------------------------------------------
	268	* SCCR - System Clock and reset Control Register 15-27
	269	*-----------------------------------------------------------------------
	270	* Set clock output, timebase and RTC source and divider,
	271	* power management and some other internal clocks
	272	*/
273	#define SCCR_MASK SCCR_EBDF11
274	/* up to 50 MHz we use a 1:1 clock */
275	#define CFG_SCCR (SCCR_COM00 \| SCCR_TBS)
276
277	/*-----------------------------------------------------------------------
278	* PCMCIA stuff
279	*-----------------------------------------------------------------------
280	*
281	*/
282	#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
283	#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
284	#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
285	#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
286	#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
287	#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
288	#define CFG_PCMCIA_IO_ADDR (0xEC000000)
289	#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
290
291	/*-----------------------------------------------------------------------
292	* IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
293	*-----------------------------------------------------------------------
294	*/
295
296	#undef CONFIG_IDE_PCCARD /* Use IDE with PC Card Adapter */
297
298	#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */
299	#undef CONFIG_IDE_LED /* LED for ide not supported */
300	#undef CONFIG_IDE_RESET /* reset for ide not supported */
301
302	#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
303	#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
304
305	#define CFG_ATA_IDE0_OFFSET 0x0000
306
307	#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
308
309	/* Offset for data I/O */
310	#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
311
312	/* Offset for normal register accesses */
313	#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
314
315	/* Offset for alternate registers */
316	#define CFG_ATA_ALT_OFFSET 0x0100
317
318	/*-----------------------------------------------------------------------
319	*
320	*-----------------------------------------------------------------------
321	*
322	*/
2535d602	323	#define CFG_DER 0
608c9146 WD	324
	325	/*
	326	* Init Memory Controller:
	327	*
	328	* BR0 and OR0 (FLASH)
	329	*/
	330
	331	#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
	332	#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */
	333
	334	#define CFG_PRELIM_OR_AM 0xFE000000 /* OR addr mask */
	335
	336	#define CFG_OR_TIMING_FLASH 0xF56
	337
	338	#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM \| CFG_OR_TIMING_FLASH)
	339	#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_PS_16 \| BR_V)
	340
	341	#define CFG_OR5_PRELIM (CFG_PRELIM_OR_AM \| CFG_OR_TIMING_FLASH)
	342	#define CFG_BR5_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) \| BR_PS_32 \| BR_V)
	343
	344	/*
	345	* BR1 and OR1 (Battery backed SRAM)
	346	*/
	347	#define CFG_BR1_PRELIM 0x80000401
	348	#define CFG_OR1_PRELIM 0xFFC00736
	349
	350	/*
	351	* BR2 and OR2 (SDRAM)
	352	*/
	353	#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */
	354	#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB */
	355
	356	#define CFG_OR_TIMING_SDRAM 0x00000A00
	357
	358	#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM \| CFG_OR_TIMING_SDRAM )
	359	#define CFG_BR2_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V )
	360
	361	/* Marel V37 mem setting */
	362
	363	#define CFG_BR3_CAN 0xC0000401
	364	#define CFG_OR3_CAN 0xFFFF0724
	365
	366	/*
	367	#define CFG_BR3_PRELIM 0xFA400001
	368	#define CFG_OR3_PRELIM 0xFFFF8910
	369	#define CFG_BR4_PRELIM 0xFA000401
	370	#define CFG_OR4_PRELIM 0xFFFE0970
	371	*/
	372
	373	/*
	374	* Memory Periodic Timer Prescaler
	375	*/
	376
	377	/* periodic timer for refresh */
	378	#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
	379
	380	/*
	381	* Refresh clock Prescalar
	382	*/
	383	#define CFG_MPTPR MPTPR_PTP_DIV16
	384
	385	/*
	386	* MAMR settings for SDRAM
	387	*/
388
389	/* 10 column SDRAM */
390	#define CFG_MAMR_10COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
391	MAMR_AMA_TYPE_2 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A12 \| \
392	MAMR_GPL_A4DIS \| MAMR_RLFA_4X \| MAMR_WLFA_3X \| MAMR_TLFA_16X)
393
394	/*
395	* Internal Definitions
396	*
397	* Boot Flags
398	*/
399	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
400	#define BOOTFLAG_WARM 0x02 /* Software reboot */
401
608c9146	402	#endif /* __CONFIG_H */